Mitsubishi PD-4225 Bedienungsanleitung

Mitsubishi Plasma TV PD-4225

Owner’s Guide

Technically Anything is Possible®

2 Plasma TV

Warning

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-

cient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the appli-

ance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric

Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the building, as close to the point of the cable entry as prac-

tical.

REGULATORY INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

CAUTION:

Do not attempt to modify this product in any way without written authorization from Mitsubishi Digital Electronics

America. Unauthorized modification could void the user’s authority to operate this product.

COMPLIANCE:

The responsible party for this product’s compliance is:

Mitsubishi Digital Electronics America

9351 Jeronimo Road

Irvine, CA 92618

Phone: (949) 465-6000

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Warning

arning

Owner’s Manual 3

Safety Instructions

Important safeguards for you and your new product

Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential elec-

trical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and

observe the following safety points when installing and using your new product, and save them for future reference.

Observing the simple precautions discussed in this booklet can help you get many years of enjoyment and safe operation

that are built into your new product.

This product complies with all applicable U.S. Federal safety requirements, and those of the Canadian Standards

Association.

1. Read Instructions

All the safety and operating instructions should be read

before the product is operated.

2. Follow Instructions

All operating and use instructions should be followed.

3. Retain Instructions

The safety and operating instructions should be retained for

future reference.

4. Heed Warnings

All warnings on the product and in the operating instructions

should be adhered to.

5. Cleaning

Unplug this product from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp

cloth for cleaning. (See Page 8, Cleaning Safeguards)

6. Water and Moisture

Do not use this product near water, for example, near a bath

tub, wash bowl, kitchen sink, or laundry tub, in a wet base-

ment, or near a swimming pool.

7. Accessories, Carts, and Stands

Do not place this product on a slippery or tilted surface, or on

an unstable cart, stand, tripod, bracket, or table. The product

may slide or fall, causing serious injury to a child or adult,

and serious damage to the product. Use only with a cart,

stand, tripod, bracket, or table recommended by the manu-

facturer, or sold with the product. Any mounting of the prod-

uct should follow the manufacturer’s instructions, and should

use a mounting accessory recommended by the manufac-

turer.

8. Transporting Product

A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may

cause the product and cart combination to overturn.

9. Attachments

Do not use attachments not recommended by the product

manufacturer as they may cause hazards.

10. Ventilation

Slots and openings in the cabinet are provided for ventilation

and to ensure reliable operation of the product and to protect

it from overheating, and these openings must not be blocked

or covered. The openings should never be blocked by plac-

ing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is pro-

vided or the manufacturer’s instructions have been adhered

to.

11. Power Sources

This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of

the type of power supply to your home, consult your product

dealer or local power company. For products intended to

operate from battery power, or other sources, refer to the

operating instructions.

12. Power-Cord Polarization

This product is equipped with a three-wire grounding type

plug, a plug having a third (grounding) pin. This plug will only

fit into the grounding-type power outlet. This is a safety fea-

ture. If you are unable to insert the plug into the outlet, con-

tact your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the grounding-type plug.

13. Power-Cord Protection

Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or

against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from

the product.

PORTABLE CART WARNING

(Continued on next page)

Safety Instructions

4 Plasma TV

Safety Instructions

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductor

(NEC Section 810-21)

Ground Clamps

Power Service Grounding

Electrode System (NEC

Art 250, Part H)

Ground Clamp

Electric Service

Equipment

Example of Grounding According to National

Electrical Code Instructions

NEC - National Electrical Code

14. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the

product, be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges and

built-up static charges. Article 810 of the National Electrical

Code (U.S.A.), ANSI/ NFPA 70 provides information with

regard to proper grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna-dis-

charge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

15. Lightning

For added protection for this product (receiver) during a light-

ning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect

the antenna or cable system. This will prevent damage to the

product due to lightning and power-line surges.

16. Power Lines

An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or

circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power lines

or circuits as contact with them might be fatal.

17. Overloading

Do not overload wall outlets and extension cords as this can

result in a risk of fire or electric shock.

18. Object and Liquid Entry

Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

19. Servicing

Do not attempt to service this product yourself as opening or

removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service per-

sonnel.

20. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a. If the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the

operating instructions.Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified technician

to restore the product to its normal operation.

e. If the product has been dropped or the cabinet has been

damaged.

f. If the product exhibits a distinct change in performance.

21. Replacement Parts

When replacement parts are required, be sure the service

technician has used replacement parts specified by the man-

ufacturer or have the same characteristics as the original

part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

22. Safety Check

Upon completion of any service or repairs to this product,

ask the service technician to perform safety checks to deter-

mine that the product is in proper operating condition.

23. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as

recommended by the manufacturer. The product may slide

or fall, causing serious injury to a child or adult, and serious

damage to the product.

24. Heat

The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products

(including amplifiers) that produce heat.

Safety Instructions continued

Owner’s Manual 5

Important Information

PRECAUTIONS

Please read this manual carefully before using your

Mitsubishi plasma TV and keep the manual handy for

future reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER. NO

USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This symbol warns the user that uninsulated

voltage within the unit may have sufficient

magnitude to cause electric shock. Therefore,

it is dangerous to make any kind of contact

with any part inside of this unit.

This symbol alerts the user that important lit-

erature concerning the operation and mainte-

nance of this unit has been included.

Therefore, it should be read carefully in order

to avoid any problems.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO

DO NOT USE THIS UNIT’S POLARIZED PLUG WITH

AN EXTENSION CORD RECEPTACLE OR OTHER

OUTLETS, UNLESS THE PRONGS CAN BE FULLY

INSERTED. REFRAIN FROM OPENING THE CABINET

AS THERE ARE HIGH-VOLTAGE COMPONENTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

WARNING

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial

environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may

cause harmful interference to radio communications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case the

user will be required to correct the interference at his

own expense.

WARNINGS AND SAFETY PRECAUTIONS

The Mitsubishi plasma TV is designed and manufactured to

provide long, trouble-free service. No maintenance other

than cleaning is required. Use a soft dry cloth to clean the

panel. Never use solvents such as alcohol or thinner to clean

the panel surface.

The plasma display consists of fine picture elements (cells).

Although Mitsubishi utilizes plasma display panels with more

than 99.99 percent active cells, there may be some cells that

do not produce light or remain lit.

For operating safety and to avoid damage to the unit, please

read and observe the following instructions.

To avoid shock and fire hazards:

1. Provide adequate space for ventilation to avoid internal

heat build-up. Do not cover rear vents or install the unit in a

closed cabinet or shelves. The unit is equipped with cooling

fans. If you install the unit in an enclosure, make sure there

is adequate space at the top of the unit to allow hot air to rise

and escape. If this happens, turn off the power to the moni-

tor and unplug the power cord. If the room where the moni-

tor is installed is particularly hot, move the monitor to a

cooler location, and wait for the monitor to cool for 60 min-

utes. If the problem persists, contact your Mitsubishi dealer

for service.

2. Do not use the power cord polarized plug with extension

cords or outlets unless the prongs can be completely

inserted.

3. Do not expose the unit to water or moisture.

4. Avoid damage to the power cord, and do not attempt to

modify the power cord.

5. Unplug the unit during electrical storms or if the unit will

not be used over a long period.

6. Do not open the cabinet which has potentially dangerous

high voltage components inside. If the unit is damaged in

this way the warranty will be void. Moreover, there is a seri-

ous risk of electric shock.

7. Do not attempt to service or repair the unit. Mitsubishi is

not liable for any bodily harm or damage caused if unquali-

fied persons attempt service or open the back cover. Refer

all service to authorized Mitsubishi Service Centers.

CAUTION

PD-4225S can be used with the following optional acces-

sories. Use with other optional accessories is capable of

resulting in instability causing possible injury.

Manufacturer’s name: MITSUBISHI DIGITAL

ELECTRONICS AMERICA, INC

Stand: MB-4225

Speakers: MS-4225

Please contact MITSUBISHI DIGITAL ELECTRONICS

AMERICA, INC for approved optional accessories.

Important Information

6 Plasma TV

Important Information

To avoid damage and prolong operating life:

1. Use only with 120V 50/60Hz AC power supply. Continued

operation at line voltages greater than 120 Volts AC will

shorten the life of the unit, and might even cause a fire

hazard.

2. Handle the unit carefully when installing it and do not drop.

3. Set the unit away from heat, excessive dust, and direct

sunlight.

4. Protect the inside of the unit from liquids and small metal

objects. In case of an accident, unplug the unit and have

it serviced by an authorized Mitsubishi Service Center.

5. Do not hit or scratch the panel surface as this causes

flaws on the surface of the screen.

6. For correct installation and mounting it is strongly recom-

mended to use a trained, authorized Mitsubishi dealer.

7. Only use tabletop stands or wall-mount brackets that are

designed specifically for this product.

8. As is the case with any phosphor-based display (like a

CRT monitor, for example) light output will gradually

decrease over the life of a Plasma Display Panel.

Recommendations to avoid or minimize uneven phosphor

aging:

Like all phosphor-based display devices and all other gas

plasma displays, plasma monitors can be susceptible to

uneven phosphor aging under certain circumstances.

Certain operating conditions, such as the continuous display

of a static image over a prolonged period of time, can result

in uneven phosphor aging if proper precautions are not

taken. To protect your investment in this Mitsubishi plasma

TV, please adhere to the following guidelines and recom-

mendations for minimizing this type of damage:

*Do not turn off ORBITER.†

*Always enable and use your computer’s, video game or

DVD player screen saver during use with these sources.

*Display a moving image whenever possible.

*Change the position of the menu display from time to time.

*Always power down the monitor when you are finished

using it.

If the plasma monitor is in long term use or continuous oper-

ation, take the following measures to reduce the likelihood

of uneven phosphor aging:

*Do not turn off ORBITER.†

*Lower the Brightness and Contrast levels as much as pos-

sible without impairing image readability.

*Display an image with many colors and color gradations

(i.e. photographic or photo-realistic images).

*Create image content with minimal contrast between light

and dark areas. Use complementary or pastel colors when-

ever possible.

*Avoid displaying images with few colors and distinct,

sharply defined borders between colors.

NOTE:

Uneven phosphor aging/burn-in is not covered by the

warranty.

Contact Mitsubishi at 1-800-332-2119 for other recom-

mended procedures that will best suit your particular appli-

cation needs.

†ORBITER - Uneven phosphor aging/burn-in reduction feature. To minimize the risk of uneven phosphor aging/burn-in when

displaying still images, the Mitsubishi PD-4225S offers a built-in feature known as ORBITER. The ORBITER feature inter-

mittently shifts the screen image horizontally and vertically in small increments. This intermittent screen movement is usu-

ally not evident in full motion video. In some instances the ORBITER shift might be evident while displaying static guides or

menus. The default setting for ORBITER is On. Mitsubishi chose this setting to help reduce uneven phosphor aging. Please

do not shut the ORBITER off. For more information regarding ORBITER, see page 34.

Owner’s Manual 7

Important Information

WARNING: Do not leave stationary or letterbox images on-screen for

extended periods of time. Mix types of pictures shown. Uneven phosphor

aging is NOT covered by your warranty.

The normal use of a TV should include a mixture of TV pic-

ture types. The most frequently used picture types should fill

the screen with constantly moving images rather than sta-

tionary images or patterns. Displaying the same stationary

patterns over extended periods of time, or displaying the

same stationary pattern frequently can leave a subtle but

permanent ghost image. To avoid this, mix your viewing pat-

tern. Do not show the same stationary image for more than

15% of your total TV viewing in any one week. Display con-

stantly moving and changing images that fill the screen

whenever possible.

This plasma TV is a phosphor-based display. As is the case

with any phosphor-based display (like a CRT TV/monitor, for

example) light output will gradually decrease over the life of

a plasma display panel. Normal TV pictures fill the screen

with constantly changing images. Under these conditions,

phosphor-based displays age at an even rate across the

entire screen. This maintains a TV picture that is evenly

bright over the whole screen. Stationary images or images

that only partially fill the screen (leaving black or colored

bars to fill the screen), when used over extended periods of

time or when viewed repeatedly, can cause uneven aging of

the phosphors used in plasma displays and can leave subtle

ghosts of the stationary images in the picture.

When using a computer or similar device through a VGA

input, be sure to turn on the Screen Saver feature and set

the activation time to 5 minutes or less. If your computer pro-

gram allows, you should also set your toolbars to the hidden

mode.

Still or stationary images may be received from broadcast-

ers, cable channels, satellite channels, DVD discs, video

tapes, laser discs, on-line services, web/internet searching

devices, video games, and digital TV tuner/converter boxes.

Examples of these types of images include, but are not lim-

ited to the following:

•Letterbox top/bottom black bars: shown at the top and

bottom of the TV screen when you watch a widescreen

(16:9) movie on a standard (4:3) TV.

•Side bar images: solid bars shown on each side of an

image when watching a standard (4:3) program on a

widescreen (16:9) TV.

•Stock-market report bars: ticker running at the bottom of

the TV screen.

•Shopping channel logos & pricing displays: bright

graphics that are shown constantly or repeatedly in the

same location.

•Video game patterns and scoreboards

•Bright station logos: moving or low-contrast graphics are

less likely to cause uneven aging of the picture tubes.

•On-line (Internet) web sites: or any other stationary or

repetitive computer style images.

•Closed Caption Backgrounds: When set to black or

bright color.

8 Plasma TV

Cleaning Safeguards

Plasma TV Screen & Cabinet

Please follow the cleaning safeguards listed below to pre-

vent damage to your Plasma TV and retain this document for

future reference.

IMPORTANT: No Abrasives!

DO NOT use any kind of abrasive cloth or cleaner or

ammonia on the Plasma TV’s screen or cabinet.

Cleaning Your Plasma TV

Normally, light dusting with a dry, non-abrasive cloth will

clean your Plasma TV. If cleaning beyond this is needed,

please follow these guidelines:

First, turn off the Plasma TV and unplug the power cord from

the wall outlet before cleaning.

Cleaning the cabinet of your Plasma TV

• Gently wipe down the Plasma TV with a soft, non-abrasive

cloth such as cotton flannel or a clean cloth diaper, lightly

moistened with water.

• Dry with a second dry, soft, non-abrasive cloth.

General Cleaning Warnings:

•DO NOT apply pressure to the Plasma TV’s screen.

•DO NOT allow liquid to enter the Plasma TV through the

ventilation slots or any crevice.

•DO NOT use any strong or abrasive cleaners because they

can scratch the screen and the cabinet.

•DO NOT use any cleaners that contain ammonia, bleach,

alcohol, benzene, or thinners because they can damage

and dull the surfaces.

•DO NOT scrub or rub the screen or cabinet. Wipe it gently.

IMPORTANT

For further information, assistance in operating your

Plasma TV or if you are in need of service, please con-

tact us at www.mitsubishi-tv.com or call Consumer

Relations at 800-332-2119

Cleaning Safeguards

Owner’s Manual 9

Introduction

What is a Plasma Display Panel (PDP)?

If voltage is applied to gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At that

instant, light is emitted. A Plasma Display is a next generation flat display using this phenomenon.

160° - Wide angle range of vision

Your flat panel plasma TV offers an exceptionally broad viewing angle -- over 160 degrees. This means that the TV is clear and

visible to viewers anywhere in the room.

Wide Screen

The 42" screen gives you a movie-theater experience in the comfort of your own home.

Multimedia

Connect your plasma TV to a PC and you can use it for conferencing, games, and internet browsing. The Picture-in-Picture fea-

ture allows you to view your PC and video images simultaneously.

Versatile

The light weight and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs will not

fit.

The PDP Manufacturing Process: Why minute colored dots may be present on the PDP screen

The plasma display panel consists of more than one million fine picture elements (cells). Although Mitsubishi utilizes plasma display

panels with more than 99.99 percent active cells, there may be some cells that do not produce light or remain lit.

WARNING

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

10 Plasma TV

Contents

After reading this manual, keep it handy for future reference.

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4

Important Information . . . . . . . . . . . . . . . . . . . . . . . . . .5~7

Cleaning Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Installation

Installing the Plasma TV on the Stand . . . . . . . . .12

Matching Speaker Installation . . . . . . . . . . . . . . . .14

Controls – Front Panel Controls . . . . . . . . . . . . . .15

Connection Options – Front Panel . . . . . . . . . . . .16

Connection Options – Back Panel . . . . . . . . . . . .17

Remote Control Functions

Care and Operation . . . . . . . . . . . . . . . . . . . . .18

Overview of the TV Layer Buttons . . . . . . . . . . .19

Use of the Remote Control with Other A/V Products

. . .20~21

Special Functions . . . . . . . . . . . . . . . . . . . . . . .22

External Equipment Connections . . . . . . . . . .23~27

Antenna Connection . . . . . . . . . . . . . . . . . . . . .23

VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Cable TV Setup . . . . . . . . . . . . . . . . . . . . . . . .24

External A/V Source Setup . . . . . . . . . . . . . . . .25

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

DTV Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Monitor Out Setup . . . . . . . . . . . . . . . . . . . . . .26

PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

HD-5000/MonitorLink Setup . . . . . . . . . . . . . . .27

Operation

Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . .28

Menu Language Selection . . . . . . . . . . . . . . . . . .28

Channel Menu Options

Memorizing the Channels with Auto program . . .29

Memorizing the Channels with Manual Program . .29

Fine Tuning Adjustment . . . . . . . . . . . . . . . . . .29

Favorite Channel Memory . . . . . . . . . . . . . . . . .29

Picture Menu Options

Auto Picture Control . . . . . . . . . . . . . . . . . . . . .30

Manual Picture Control . . . . . . . . . . . . . . . . . . .30

Auto Color Temperature Control . . . . . . . . . . . .30

Manual Color Temperature Control . . . . . . . . . .30

Sound Menu Options

Audio Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Level Sound . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Manual Sound Control . . . . . . . . . . . . . . . . . . .31

Stereo/SAP Broadcasts Setup . . . . . . . . . . . . .31

Timer Menu Options

Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . .32

Manual Clock Setup . . . . . . . . . . . . . . . . . . . . .32

On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .32

Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Special Menu Options

Button Lock . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Long Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Low power . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Caption/Text . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Screen Menu Options

Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . .37

Setting Picture Format . . . . . . . . . . . . . . . . . . .37

Picture Size Zoom . . . . . . . . . . . . . . . . . . . . . .37

Adjusting Horizontal/Vertical Position . . . . . . . .38

Manual Adjust . . . . . . . . . . . . . . . . . . . . . . . . . .38

VCR Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Initializing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Luminance Noise Reduction . . . . . . . . . . . . . . .39

Selecting Wide VGA mode . . . . . . . . . . . . . . . .39

PIP (Picture-in-Picture) Feature

Watching the PIP . . . . . . . . . . . . . . . . . . . . . . .40

Swapping the PIP . . . . . . . . . . . . . . . . . . . . . . .40

Moving the PIP . . . . . . . . . . . . . . . . . . . . . . . . .40

TV Program selection for PIP . . . . . . . . . . . . . .40

Selecting an Input Signal Source for PIP . . . . . .40

PIP Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . .40

Sub Picture Size Adjustment . . . . . . . . . . . . . . .41

Lock Menu Options

Lock Setup . . . . . . . . . . . . . . . . . . . . . . . . .42~43

External Control Device Setup . . . . . . . . . . . . . . . . . . .44

Troubleshooting Checklist . . . . . . . . . . . . . . . . . . .45~46

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . .47

APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48~49

Contents

Setup and Operation Checklist

(See pages 23~27 for available connection and operational setup options.)

1. Unpack the TV and all accessories.

See page 11.

2. Install Matching Stand

See page 12.

3. Connect all external video and audio equipment.

See pages 23 ~ 27.

4. Install batteries in remote control.

See page 18.

5. Turn the TV on.

See page 28.

6. Turn video source equipment on.

7. Select viewing source for the TV.

See page 19.

8. Fine-tune source image and sound to personal preference

or as required by source.

See pages 30 ~ 31.

9. Additional features Setup

See Contents above.

Inhaltsverzeichnis

Andere Mitsubishi Plasma-TV Handbücher

Mitsubishi

Mitsubishi PD-4225S Bedienungsanleitung

Beliebte Plasma-TV Handbücher anderer Marken

Hitachi

Hitachi 50PD9800TA Bedienungsanleitung

LG 60PA5500 Bedienungsanleitung

Sony

Sony WEGA KE-P42M1 Bedienungsanleitung

VESTEL

VESTEL PL2000 Bedienungsanleitung

VisionQuest

VisionQuest PVQ-32VGB Bedienungsanleitung

Maxent

Maxent MX-5020HPM Bedienungsanleitung

LG 50PK550 Bedienungsanleitung

LG PJ550N Bedienungsanleitung

Samsung

Samsung PA43H4000 Bedienungsanleitung

LG 42LG70ER Bedienungsanleitung

Samsung

Samsung 7+ series Bedienungsanleitung

Panasonic

Panasonic Viera TH-37PA60EY Bedienungsanleitung

LG DU-42PZ60H Bedienungsanleitung

Panasonic

Panasonic Viera TH-42PX80A Bedienungsanleitung

Panasonic

Panasonic VIERA TH-P50X30D Bedienungsanleitung

Panasonic

Panasonic TH-50PX20U/P Bedienungsanleitung

Panasonic

Panasonic TH-37PW7BX Bedienungsanleitung

Nexus

Nexus NX422 Bedienungsanleitung