Mitsubishi VS-45607 Bedienungsanleitung

MITSUBISHI

THE BIG SCREEN COMPANY TM

RISKOF ELECTRICSHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK).

NO USER-SERVlCEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

/_The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert

the user to the presence of uninsulated"dangerous voltage within the products enclosure

that may be of sufficient magnitude to constitute a risk of electric shock

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

Warning: To avoid permanently imprinting a fixed imageonto your TV screen,pleasedo not displaythe same

stationary imageson the screen for more than 15%of your total TV viewing in one week. Examplesof stationary

imagesare letterbox top/bottom barsfrom DVD disc or other video sources,side bars when showing standardTV

pictures on widescreenTV's, stock market reports, video game patterns, station logs,web sitesor stationary com-

puter images. Suchpatterns can unevenly agethe picture tubes causing permanent damageto theTV. Pleasesee page

58 for a detailed explanation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or reJocate the receiving antenna

•Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by Mitsubishi could void the user's authority to operate

this equipment.

WARNING:

TO REDUCE THE RISKOF FIREOR ELECTRIC SHOCK, DO NOT EXPOSETHISAPPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO PREVENTELECTRICSHOCK, MATCH WIDE BLADE OF PLUGTO WIDE SLOT,FULLYINSERT.

NOTE TO CATV SYSTEM INSTALLER:

THIS REMINDER ISPROVIDEDTO CALLTHE CATV SYSTEMINSTALLER'SATTENTION TOARTICLE 820-40 OF

THE NEC THAT PROVIDESGUIDELINES FOR PROPERGROUNDING AND, IN PARTICULAR,SPECIFIESTHAT

THE CABLE GROUND SHALL BECONNECTEDTOTHE GROUNDING SYSTEMOFTHE BUILDING,AS CLOSE

TOTHE POINT OF CABLE ENTRYAS PRACTICAL.

Contents

Important Safeguards 5

Instructions on safety and proper handlingof your Mitsubishi television

Special Features 7

Distinctive features, items included with your Mitsubishi television and hookup guidelines

Shortcuts 8

A quick reference list

Connections 9

Basichookups to an antenna, cable and components

Remote Control Functions 15

Features of the remote control, programming to work with other audio and video products,

explanation of buttons

Thel_ ®Menu System 2 I

Explanation of the on-screen menu system and the basic set-up menu screens including

Memorizing Channels, Set Clock and Day, AV Connection and On-Screen Language

Remote Control Input and Channel Selection 3 I

Changing inputs and channels and setting the sleep timer with the remote control

The Main Menu Screens 33

Explains the Parent Lock, Channel Edit, Advanced Features and AudioNideo Settings Menus

Special Remote Control Functions 49

How the remote works with other products includingthe Mitsubishi A/V Network, viewing

the PIP (Picture-in-Picture) and POP (Picture-outside-Picture)

Control Panel Functions 54

Explanation of the front panel buttons and the back panel terminals

Troubleshooting 57

Common problems, notes on caring and cleaningyour Mitsubishi television and how to

obtain service

Appendices 6 I

Diamond ShieldTM installation, remote control programming codes, bypassing the parent lock

Please read all these instructions regarding your television set and retain for future refer-

ence. Follow all warnings and instructions marked on the television.

I. Read, Retain and Follow Instructions

Read all safety and operating instructions before operating the appliance. Retain the safety and operating

instructions for future reference. Follow all operating and use instructions.

2. Heed Warnings

Adhere to all warnings on the applianceand in the operating instructions.

3. Cleaning

Unplug thisTV receiver from the walt outlet before cleaning.Do not useliquid or aerosol cleaners.Cleaners

canpermanently damagethe cabinet or screen.Use adamp cloth for cleaning.

4. Attachments and Equipment

Never add anyattachments and/or equipment without approval of the manufacturer assuchadditions may

result in the risk of fire, electric shock or other personal injury.

5. Water and Moisture

Do not usethis'IV receiver where contact with or immersioninwater ispossible. Do not usenear bath

tubs, wash bowls, kitchen sinks,laundry tubs,swimming pools, etc.

6. Accessories

Do not placethis TV receiver on an unstable cart,stand,tripod, bracket, or table. The TV receiver mayfall,

causingserious injuryto a childor adult, and serious damageto the appliance. Use only

with a cart, stand,tripod, bracket, or table recommended by the manufacturer,or sold with

theTV receiver. Any mounting of the applianceshould follow the manufacturer's instruc-

tions, and should usea mounting accessoryrecommended bythe manufacturer.

An applianceand cart combinationshould be moved with care. Quick stops, excessive

force, and uneven surfacesmay causethe applianceand cart combination to overturn.

7. Ventilation

Slots and openingsin the cabinetare provided for ventilation and to ensure reliable operation of theTV

receiver and to protect it from overheating. Do not block these openingsor allow them to be blocked by

placingtheTV receiver on a bed,sofa,rug,or other similar surface. Nor should it be placed over a radiator

or heat register. If the TV receiver is to be placedin a rack or bookcase,ensurethat there is adequate

ventilation and that the manufacturer's instructions havebeen adhered to.

8. Power Source

This TV receiver should be operatedonlyfrom the type of power source indicated on the marking label. If

you are not sure of the type of power supplied to your home, consult your appliancedealer or local power

company.

9. Grounding or Polarization

This TV receiver isequipped with a polarized alternating current line plug havingone blade wider than the

other. This plug will fit into the power outlet only one way. Ifyou are unableto insertthe plug fully intothe

outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replaceyour

obsolete outlet. Do not defeat the safety purpose of the polarized plug.

I0. Power-Cord Protection

Power-supplycords should be routed so that they are not likely to be walked on or pinched by items placed

upon or againstthem, payingparticular attention to cords at plugs,convenience receptacles,and the point

where they exit from the appliance. 5

I I. Lightning

For added protection for thisTV receiver during a lightningstorm, or when it isleft unattended and unused

for long periods of time, unplug it from the wall outlet and disconnect the antennaor cable system. This will

prevent damageto theTV receiver due to lightning and power-line surges.

12. Power Lines

An outside antenna system should not be locatedinthe vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power linesor circuits. When installingan outside

antennasystem,extreme care should be taken to keep from touching such power lines or circuits ascontact

with them might be fatal.

13. Overloading

Do not overload walt outlets and extension cords asthis can result ina risk of fire or electric shock.

14. Object and Liquid Entry

Never pushobjects of anykind into thisTV receiver through openingsasthey maytouch dangerousvoltage

points or short-out parts that could result in a fire or electric shock. Never spill liquid of anykind on theTV

receiver. EXAMPLE OF ANTENNA GROUNDING

15. Outdoor Antenna Grounding

If an outside antennaor cablesystem is connected to the TV receiver,be sure

the antenna or cable systemis grounded so asto provide some

protection againstvoltage surges and built-up static charges.

Section 810 of the National Electrical Code,ANSI/NFPA

70-1984, provides information with respect to proper

grounding of the mast and supporting structure, grounding

of the lead in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit, con-

nection to grounding electrodes, and requirements for the

grounding electrode.

LEAD IN WIRE

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

:_.POWER SERVIC EGROUNDING

ELECTRODE SYSTEM

NEC -- NATIONAL ELECTRICAL CODE (NEC ART 250, PART H)

16. Servicing

Do not attempt to service this TV receiver yourself asopening or removing covers may expose you to

dangerousvoltage or other hazards. Refer all servicing to qualified service personnel.

17. Damage Requiring Service

Unplug thisTV receiver from the walt outlet and refer servicing to qualified service personnel under the

following conditions:

(a)When the power-supply cord or plug isdamaged.

(b) If liquid hasbeen spilled,or objects havefallen into theTV receiver.

(d) If theTV receiver does not operate normally by following the operating instructions,adjust only those

controls that are covered by the operating instructionsasan improperadjustment of other controls may

result indamageand will often require extensive work by a qualified technician to restore theTV receiver to

itsnormal operation.

(e) If theTV receiver hasbeen dropped or the cabinet hasbeen damaged.

(f)When theTV receiver exhibits a distinct changein performance -- this indicatesa need for service.

18. Replacement Parts

When replacement parts are required, be sure the service technician hasused replacement parts specified

by the manufacturer or havethe samecharacteristics asthe original part. Unauthorized substitutions may

result infire, electric shock or other hazards.

19. Safety Check

Upon completion of anyservice or repairs to this TV receiver,askthe service technician to perform safety

checksto determine that the TV receiver isin safeoperating condition.

0ComponentVideo Input - for the best picture from DVD players

0DiamondShield TM- protective screen shield

(Optional with VS-45607,VS-50607 & VS-60607)

0 IRIS TM - sensor that automatically adjusts brightness and contrast

0 Multibrand Remote Control - use one remote control for many

audio video components

0PIP and POP - Picture-in-picture and Picture-outside-picture with

split screen mode

The following items are included with your newTV:

Remote Control Active A/V Network Cable DJam°ndShEeld"

_ao_ory I_staBed on models V$-50707, VS-5S707, VS_0707

apd V S-70707

Optiona] for models V$-45607, VS-50607, VS_Z_607

(2),_ S

Batteries

The connections shown in this book are general. Cable systems as well as individual audio and/or

video components can vary from those shown here. The first diagrams show basic connections

to antenna or cable systems. After you have completed these, you can then connect any addi-

tional components (stereo, DVD, AV receiver, etc.).

IMPORTANT

To maximize your system for its best

performance, your dealer can help you

customize hookups and sell you any

additional connection accessories that

may be needed for your individual

equipment.

0Hooking up yourTV to an antenna or wall outlet cable

0Remote control functions - pages 19-20

0Menu screen summaries - page 22-24

0Selecting the input - page 3 I

0Setting theV-chip parent lock - page 33

0Picture-in-picture mode - page 50

0Picture-outside-picture mode - page 52

0Troubleshooting - page 57

- page 9

TV to Antenna orWall Outlet Cable

Separate UHF andVHF antennas

I. Connect the UHF andVHF

antenna leads to the UHF/VHF

combiner.

2. Press the combiner ontoANT-A

on the TV back panel.

VNF Antenna UHF A_teer_

(C_neE_ 14"_9)

F_atTw_ Lead F_t T_

Ex[emal

A_terna

0r Ca_e

L PTIONAL*

Oemb_r_r

Baok S_e

TV Sack Panel

ANT._,

.@@@

®®

®@

o 6

@@@

o6'%0

*there are different combiners for different wires.

Check with your dealer for the combiner style that you need,

Twin lead antenna or wall outlet cable

For antenna with twin fiat

leads

I. Connect the 300 ohm twin leads to

the transformer.

2. Push the 75 ohm side of the trans-

former onto ANT-A on the TV

back panel.

For cable or antenna with

coaxial lead

Connect the incoming cable to

ANT-A on the TV back panel,

000.....L/

Twin Load

_a_Hng T_ndo_er

TV Back PaneI

ANT A

@@@

®®

®@

@o@

Connection of TV to Cable Box

I. Connect the incoming cable to

ANT-A on theTV back panel.

2. Connect two coaxial cables as

follows:

•One from CABLE LOOP-OUT on

theTV back panel to IN on the

back of the cable box,

• One from OUT on the back of the

cable box to ANT-B on theTV

back panel,

incoming Cabl_

TVBack Panel

@o @G@

m_ALOep_U_TB o_ _o®

Cable Box

rear terminals

Connection ofTV toVCR and Cable Box

I. Connect the incoming cable toANT-A

on the TV back panel.

2. Connect three coaxial cables as follows:

•One from CABLE LOOP-OUT on the

TV back panel to IN on the back of the

cable box.

• One from OUT on the back of the

cable box to ANTENNA IN on the

VCR back panel.

• One from ANTENNA OUT on the

VCR back panel to ANT-B on the TV

back panel.

TV Back pan_

.... ®®

ANT_L_OUT ANT,B ®®

VCR Back panel

If your VCR has avideo chant=el

ON/OFF sw_tch_ set it to OFF,

Audio Video Connections

I. Connect a video cable fromVIDEO

OUT on theVCR back panel toVIDEO

INPUT I or INPUT 2 on theTV back

panel.

If you have a S-VHSVCR, follow the

same steps, using the S-Video terminals

on the VCR and TV.

2. Connect a set of audio cables from

AUDIO OUT on theVCR back panel

to AUDIO INPUT on the TV back

panel. The red cable connects to the R

(right) channel and the white cable

connects to the L (left). If yourVCR is

non-stereo, connect only the L (left)

cable.

TV _ck P_e_

RCA

cab_

VCR _ck pa_el

If your VCR has a video channel

ON/OFF s_wltch, set it to OFF,

_ F_CA pin-ly

video caSe_

A_tac_

only

cat_e

type

type cable

Connection ofTV toVCg and Antenna or

Wall Outlet Cable

Antenna/Cable Connections

I. Connect the incoming cable toANT-A

on theTV back panel.

2. Connect two coaxial cables as follows:

•One from CABLE LOOP-OUT on the

TV back panel toANTENNA IN on the

VCR back panel.

• One fromVCR back panelANTENNA

OUT to ANT-B on the TV back panel.

If your VCR has a video channel

OWOFF swltch_ set It to OFF,

®®

Audio/Video Connections

I. Connect a video cable fromVIDEO

OUT on theVCR back panel toVIDEO

INPUT I or INPUT 2 on theTV back

panel.

If you have a S-VHS VCR, follow the

same steps, using the S-Video terminals

on the VCR and TV.

2. Connect a set of audio cables from

AUDIO OUT on theVCR back panel to

AUDIO INPUT on theTV back panel.

The red cable connects to the R (right)

channel and the white cable connects to

the L (left). If yourVCR is non-stereo,

only connect the L (left) cable.

OUT

OPTIONAL

_ypOc_b_e

VCRBackPanel

If your VCR has

a video channel

ON/OFF switch,

set it to OFF.

TV Back Panel

o'_

o I

Wh_e

OROd 0

v_eoc_bJo

Dieses Handbuch passt für folgende Modelle

Andere Mitsubishi Projektionsfernsehen Handbücher

Mitsubishi

Mitsubishi Platinum Series Bedienungsanleitung

Mitsubishi

Mitsubishi Mr.Slim WD-52627 Bedienungsanleitung

Mitsubishi

Mitsubishi WS-48315 Bedienungsanleitung

Mitsubishi

Mitsubishi V19-V21 Bedienungsanleitung

Mitsubishi

Mitsubishi WD-52525 Bedienungsanleitung

Mitsubishi

Mitsubishi WD-73837 Installationsanleitung

Mitsubishi

Mitsubishi Diamond LT-52246 Bedienungsanleitung

Mitsubishi

Mitsubishi ws-48413 Bedienungsanleitung

Mitsubishi

Mitsubishi WD-62327 Bedienungsanleitung

Mitsubishi

Mitsubishi WD-Y57aa Bedienungsanleitung

Mitsubishi

Mitsubishi WD-52526 Bedienungsanleitung

Mitsubishi

Mitsubishi LaserVue L65-A90 Bedienungsanleitung

Mitsubishi

Mitsubishi WS-A48 Bedienungsanleitung

Mitsubishi

Mitsubishi WS-73909 Bedienungsanleitung

Mitsubishi

Mitsubishi WT-46809 Bedienungsanleitung

Mitsubishi

Mitsubishi VS-60609 Bedienungsanleitung

Mitsubishi

Mitsubishi WD-73831 Bedienungsanleitung

Mitsubishi

Mitsubishi VS-50800 Bedienungsanleitung

Mitsubishi

Mitsubishi VS-50805 Bedienungsanleitung

Mitsubishi

Mitsubishi WD-65000 Bedienungsanleitung

Mitsubishi

Mitsubishi WS-65315A Bedienungsanleitung

Mitsubishi

Mitsubishi VS-55601 Bedienungsanleitung

Mitsubishi

Mitsubishi WS-73907 Bedienungsanleitung

Mitsubishi

Mitsubishi WD-57833 Bedienungsanleitung

Beliebte Projektionsfernsehen Handbücher anderer Marken

Samsung

Samsung ST-43T6P Bedienungsanleitung

Toshiba

Toshiba ColorStream TP50G60 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-65734 Bedienungsanleitung

Optoma

Optoma EP652A Bedienungsanleitung

Samsung

Samsung SP43T8HPX/XEC Bedienungsanleitung

Philips

Philips 28PW6006 - annexe 1 Bedienungsanleitung

Sony

Sony KP-57WS500 - 57" Hi-scan 1080i™ 16:9 Projection... Benutzerhandbuch

Philips

Philips 43PP8421 Bedienungsanleitung

Hitachi

Hitachi 51F510 Bedienungsanleitung

RCA

RCA P52950 Bedienungsanleitung

Sony

Sony KP-51DS1U Bedienungsanleitung

Magnavox

Magnavox 51MP392H - 51" Widescreen Hd Ready Tv Bedienungsanleitung

Hitachi

Hitachi 46F510 Bedienungsanleitung

Pioneer

Pioneer Elite PRO 510HD Bedienungsanleitung

Philips

Philips 43PP8421 Handbuch

JVC

JVC I'Art Pro AV-48P776 Bedienungsanleitung

Sony

Sony GRAND WEGA KDF-55XS955 Bedienungsanleitung

Sony

Sony KP-46WT520 - Wide Screen Projection Tv Bedienungsanleitung