2
Features:
1. Plug and Play
2. Support DDC1 & DDC2B
3. On Screen Display (OSD) Contrast, Brightness, Screen Size etc.
4. VESA holes standard 75 x 75mm, Wall or Free Arm mountable
Precautions:
1. Always handle your MT-1xxx with care when moving it, and avoiding the
impact and shock.
2. Don’t apply pressure to the screen.
3. Don’t touch the screen directly with the fingers.
4. The display area is highly prone to scratching.
5. Don’t let water or oil penetrate the monitor and wipe off water drop immediately.
Long contact with water may cause discoloration or spots.
6. Please keep the food particles and fingerprints away from the display area.
7. Be sure to turn off power supply.
8. Avoid exposing the MT-1xxx to direct sunlight or other heat source.
The MT-1xxx should be facing away from direct sunlight to reduce the glare.
9. Choose a well-ventilated area to position your MT-1xxx to allow adequate
dissipation of heat. Don’t place anything on top of the MT-1xxx.
10. Ensure the area around the MT-1xxx is clean and moisture-free.
11. Never remove the rear cover. The display unit contains high-voltage parts.
You may suffer electric shock if you touch these parts.
12. If the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
Storage:
1. Don’t store the monitor in temperature higher than 60℃or lower than -20℃.
2. Store in dark places away from sunlight and ultra violet (UV) radiation.
Cleaning:
1. Before cleaning the monitor, make sure the monitor is under the “Off” condition.
2. Please un-plug the monitor first, and don’t apply the cleaning liquid to the
monitor directly.
3. Keep a certain distance form the monitor, and apply the cleaners to the cloths and
then use the cloths to clean the monitor gently.
4. Don’t use ketene type material (ex. Acetone), Ethy1 alcohol, toluene, Ethy1 acid
or Methy1 chloride to clear the panel.
5. The desirable cleaners are water, IPA (Iso Prophy1 Alcohol) or Hexane.
