MIXER 70 Bedienungsanleitung
MIXER 70
Réf. 3B03602000
MIXER TECHNOLOGY SRL - Via dei Carabinieri, 44/45, 36040 Torri di Quartesolo, (VI) ITALIA
Tel. +39 0444 583599 - Fax +39 0444 583559 - P.I. 03725830248
User manual
Edition of 22/03/2023
More information on www.mixersrl.com
User manual - MIXER 70 202303-648-ENGP2
You just acquired one of our
machines and all the team
of Mixer Technology thanks
you for the condence
you have granted us.
Manufacturer of professional
equipments for paint and
llers, we have put our
know-how for 25 years
at the service of the
users of our machines.
Our technical & commercial
team is at your disposal
for any further information
you may need about the
machine you just acquired.
MIXER TECHNOLOGY SRL
Via dei Carabinieri, 44/45
36040 Torri di Quartesolo, (VI)
ITALIA
Tel. +39 0444 583599
Fax +39 0444 583559
SUMMARY
1. USER MANUAL................................................................ p. 3
1.1. Importance of the manual ............................................p. 3
1.2. Receivers of the manual ..............................................p. 3
2. WARNING ......................................................................... p. 4
2.1. Safety ...........................................................................p. 4
2.2. Electric connection .......................................................p. 6
2.3. End-of-life of the product..............................................p. 6
3. YOUR MACHINE.............................................................. p. 7
3.1. Description ...................................................................p. 7
3.2. Technical characteristics ..............................................p. 7
3.3. Identication of the components ..................................p. 8
4. USE OF THE MACHINE .................................................. p.10
4.1. Prerequisites ................................................................p.10
4.2. Starting up....................................................................p.11
4.3. Error codes...................................................................p.11
5. MAINTENANCE................................................................ p.12
5.1. Cleaning procedure......................................................p.12
5.2. Check-up......................................................................p.12
6. DECLARATION OF CONFORMITY................................ p.13
7. WARRANTY CONDITIONS............................................. p.14
202303-648-ENG User manual - MIXER 70 P3
1. USER MANUAL
1.1. IMPORTANCE OF THE MANUAL
This manual is a key part for the use of your machine. It summarizes the procedures of starting-up,
cleaning and maintenance of the device and also the safety instructions you need to observe.
Read carefully all the working and safety instructions and the warnings included in this manual before
starting your machine.
Most of the accidents are caused by the non-compliance of the safety standards and rules.
This manual must be kept near the machine, within reach of the user and held in good condition until
the nal destruction of the machine.
In case of loss or deterioration of the manual, you can ask the machine manufacturer mentioned on
page 4 for a copy at any moment.
1.2. RECEIVERS OF THE MANUAL
This manual is intended to any sta which will manipulate the machine :
- people in charge of the transport of the machine
- people in charge of the use of the machine
- people in charge of the cleaning and maintenance of the machine
- people in charge of the nal destruction of the machine
User manual - MIXER 70 202303-648-ENGP4
2. WARNING
2.1. SAFETY
Using the machine in an incorrect way or in non-compliance of the safety instructions
indicated in this manual can cause death or serious injuries.
Read carefully all the working and safety instructions and the warnings contained in this
manual before starting your machine.
• Respect all the safety standards before running the equipment.
• Use the equipment only for the applications specied in the manual.
• Always remain alert when using the equipment.
• Transport the machine using the handles or the appropriate grips.
• During the breaks, disconnect electrically the machine.
• Run the equipment to its nominal voltage.
• Let at least 50 cm of free space between the equipment and any obstacle so that the air
ow is not blocked.
• Know how to quickly stop the equipment in case of necessity.
• Never use the equipment while it is running abnormally or it is defective.
• Do not direct a water jet or ammable liquid on the machine.
• Never direct an air jet or product jet on a person or an animal.
• Do not touch warm surfaces of the equipment.
• Always wear adequate body protections (glasses, gloves, overall and mask) and pay
attention to long hair.
• Never touch moving parts.
• Do not insert any object or the hands inside the protection grids to avoid any accident or
damage to the machine.
• For any outside job, only use appropriate extension cords.
• Maintain the equipment carefully and clean it properly after every use.
• Disconnect the equipment before any intervention.
• Avoid absolutely to unscrew any connection while the machine is under pressure.
• Check the damaged parts.
• Do not clean the plastic parts with solvant.
• In case of damage of the electric cable or the plug, do not run the machine and contact a
licensed After-Sale Service to put genuine parts instead of the defective ones.
• In case of needed After-Sale Service, always specify the machine model and its serial
number.
• For any replacement of parts, only use genuine parts.
• Do not modify the machine.
• Do not cut or dismantle the protection grids.
• Do not open the electric box.
202303-648-ENG User manual - MIXER 70 P5
IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL
MODIFICATION WITHOUT ADVANCED NOTICE.
2. WARNING (continued)
2.1. SAFETY (continued)
WORKSPACE
• Maintain the workspace clean and clear.
• Ambient operating temperature must be from 5°C and 35°C.
• Do not use the equipment in a potentially explosive area.
• Do not place any potentially inammable objects in close proximity to the machine.
• Take away every not qualied person from the working area of the machine, as well as children
and animals.
• In case of installation of the machine on scaolding or a plan above ground level, attach the machine
to avoid any fall while operating.
• Do not install the equipment on an inclined surface to avoid the risks of unexpected moves or falls.
HOSES
• Always use hoses and connections adapted to the used product (genuine parts), do not try to x it.
• Do not walk on the hoses, do not bend them.
• Do not use the hoses to pull the machine.
STORAGE
• Keep the equipment in a clean and clear area in which the temperature does not exceed +35°C.
• After every use, necessarily grease the pump with a mixture of water + storage liquid to avoid it
blocking up. The storage of a not greased pump can damage it seriously.
User manual - MIXER 70 202303-648-ENGP6
2. WARNING (continued)
2.2. ELECTRIC CONNECTION
The electric connection of the machine must be on a 16A - 230V plug with a dierential circuit
breaker.
Before any intervention on the machine, make sure that every energy supply is cut (air and
electricity).
GROUND CONNECTOR
All the machines must be connected to the ground when they work to protect the operator from electric
shocks. Our machines are all equipped with standardized connection plugs.
Electric connection must be made by a qualied technician. It is fobidden to modify or dismantle the
machine, especially the electric box.
Repairs must be made by an authorized center or our After-sale Service.
During any intervention on the machine, make sure that the ground is well reconnected.
EXTENSION CORDS
During the use of an extension cord, make sure that it is not crushed or damaged and that it contains a
ground. Check that the section of the used extension cord is sucient to support the machine when it
is working. A too thin extension cord can cause voltage drops or overheating of the machine.
In case of use of a cable reel, it is imperative to unwind it entirely, otherwise, the equipment can be
damaged. The section must be proportional to the length of the cord.
2.3. END OF LIFE OF THE PRODUCT
At its end-of-life, the machine must not be eliminated with the other household waste. The
uncontrolled elimination of waste can harm the environment or human health. Individuals are
invited to contact the distributor which sold them the product or to inquire with their city hall
to know where and how to get rid of the product so it can be recycled while respecting the
environment.
Under the regulation of Waste of Electrical and Electronic Equipments (WEEE), we undertake
to process the used EEEs according to the following provisions: applicable only to products on
the market since 08/13/05, under the brands EUROPE PROJECTION or VOLUMAIR, products
of other brands sold by our company (upon presentation of the corresponding invoices),
products that operate using electrical energy (for example, thermal washers or compressors
do not fall into this category).
Treatment modality
WEEE returns collected by our clients/distributors at their own expense to our collection points
in Antony (92) or Rousset sur Arc (13). Upon receipt, the products are sorted by our employees
and directed to the most appropriate processing channels.
For any further information, please contact our hotline +39 0444 583599 o info@mixersrl.com.
202303-648-ENG User manual - MIXER 70 P7
3. YOUR MACHINE
3.1. DESCRIPTION
Practical and compact mixer for mortar.
A double helical paddle on a horizontal arm ensures rapid and homogeneous mixing. Mixer equipped
with a speed control, a rotation direction reversing function and a water doser.
Equipped with a digital control panel, allowing simplied adjustment of rotation speed, a water dosing
and display of the network voltage.
TO USE WITH
• All types of powder products.
• All bi-component products.
• Sand or lime to mix with water.
3.2. TECHNICAL CHARACTERISTICS
Mixing type sequential
Motor 1,1 kW
Forward / reverse rotation speed 28 to 80 RPM
Power supply 230 V - 10 A - 50 & 60 Hz
Tank capacity 70 L
Water meter integrated
Mixing paddle double helical paddle
Loading height 135 cm
Dimensions (L x w x h) 88 x 52 x 57 cm
Weight 75 kg
Do not use corrosive, acid or other types of products susceptible to damage the
tank or the blade.
The water distribution circuit is expected to be used only with water. The use of
another product, whatever it might be, can seriously damage the machine.
BE D
A
C
User manual - MIXER 70 202303-648-ENGP8
3. YOUR MACHINE (continued)
3.3. IDENTIFICATION OF THE COMPONENTS
ASafety grid
BFlip latch
CGeared electric motor
DLubricator
EControl panel (see next page)
1L1 L3
3 72 6
L2 L4
AU F4 85 9
G
202303-648-ENG User manual - MIXER 70 P9
3. YOUR MACHINE (continued)
3.3. IDENTIFICATION OF THE COMPONENTS (continued)
FMotor speed display in % GWater volume display in litres
1Start / Stop 8Increase of the preset water volume
2Start / Stop of the mixing 9Decrease of the preset water volume
3Start / Stop of the tank emptying L1 Power on light
4Increase the motor speed L2 Mixing process light
5Decrease the motor speed L3 Tank emptying process light
6Start / Stop of the water dosage L4 Water dosage process light
7Ajout d’eau par impulsion AU Emergency stop
User manual - MIXER 70 202303-648-ENGP10
4. USE OF THE MACHINE
4.1. PREREQUISITES
• The electric connection has to be 230 V - 16 A - 50 or 60 Hz with a 3 x 2,5 mm cable reel of 40m
maximum, completely unreeled.
• The mixer is equipped with a security grid (A). If the grid is open, the display (F) shows SEC and the
mixer will not start. Close the grid to activate the mixer.
START / STOP
• Once the machine has been connected, the machine is in the stop mode, the display (F) shows
OFF.
• One push of the ON/OFF button (1), the display (F) shows the set value of the speed in %, the
warning light (L1) lights up, the machine is ready.
• When the machine is working (warning light (L1) is on), one push of the button ON/OFF (1) will
switch the machine o. The display (F) will show OFF and the warning light (L1) will switch o.
MIXING
• One push of the button MIXING (2) will provoke the start-up of the mixing (alternate rotation) and
the warning light (L2) lights up.
• The button (4) and (5) allow you to increase or to reduce the speed of rotation.
WATER DOSAGE
• Set the wanted water quantity with the buttons (8) and (9). The display (G) will show the set value
in liters. Once you have set the water quantity, the display (G) will once again show the last injected
water quantity
• One push of the button DOSAGE (6) starts the dosing of the water, the warning light (L4) lights up
during the duration of the dosing and the display (G) increments the injected water quantity. Once
the set amount has been reached, the water dosage stops automatically and the warning light (L4)
switches o.
• During the automatic cycle, one push of the button DOSAGE will pause the dosing. Another push
will re-start the cycle.
• One push of the button +WATER provokes a water ow as long as the button is kept pressed. The
display (G) will add the water quantity to the one previously shown. This function is only possible
outside of the automatic water dosing seen above.
In case of a dysfunction of the machine, one 3 second push on the ON/OFF (1) will
allow you to verify that the power supply is over 210 V.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
