MOA MB02 Bedienungsanleitung
Mini Blender MB02
Instruction Manual
English / Nederlands / Deutsch / Français
www.moacolors.com
Mini Blender - English manual 2
EN
IMPORTANT SAFEGUARDS (1/4)
1. To protect against electrical shock, do not submerge the appliance
or allow the power cord to come into contact with water or any other
liquid.
2. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
3. DO NOT allow young children to operate the appliance or use as a
toy. Close supervision is necessary when any appliance is used by or
near children.
4. Never let the appliance operate unattended.
5. Remove the power cord from the electrical outlet when not in use,
before assembling or disassembling parts and before cleaning. To
unplug, grasp the plug and pull from the electrical outlet. Never pull
from the power cord.
6. DO NOT abuse the power cord. Never carry the appliance by the
power cord or yank it to disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.
BEFORE USE
Before use, please read this manual carefully.
Only connect the appliance to an earthed wall socket.
This appliance is for household use only. When using electrical
appliances, basic safety precautions should always be followed to
avoid res, electric shocks, burns, or other injuries and damage. Read
these operating and safety instructions carefully.
Mini Blender - English manual 3
EN
IMPORTANT SAFEGUARDS (2/4)
7. DO NOT operate any appliance with a damaged cord or plug, or
after the appliance malfunctions, has been dropped or damaged in any
manner.
8. If the power cord is damaged, it must be replaced by the
manufacturer, a certied service agent or similarly qualied persons in
order to avoid a hazard.
9. DO NOT let the power cord hang over the edge of table or counter
or touch hot surfaces such as the stove.
10. Always use appliance on a dry, level surface. Sinks, drain boards
or uneven surfaces must be avoided.
11. Keep hands, hair, clothing, as well as utensils out of jar while
processing to reduce the risk of severe injury to persons or damage to
the appliance. A scraper may be used but only when the appliance is
not running.
12. CAUTION: Blade assembly is sharp, handle with care. When
handling the blade assembly, always hold by the base of the blade
assembly.
13. Avoid contact with moving parts.
14. DO NOT attempt to sharpen blades.
15. DO NOT use the appliance if blade assembly is bent or damaged.
16. To reduce risk of injury, never place the blade assembly on the
base without the proper attachment.
17. DO NOT operate this appliance on or near any hot surface (such
as gas or electric burner or in a heated oven).
18. The use of attachments or accessories not recommended or sold by
the manufacturer may cause re, electric shock or personal injury.
19. DO NOT remove the jar from the motor base while the appliance
is running.
Mini Blender - English manual 4
EN
IMPORTANT SAFEGUARDS (3/4)
20. To reduce the risk if injury, NEVER operate the appliance without
the blade assembly in place; DO NOT try to defeat the interlock
mechanism; make sure that the attachment is properly installed before
operating the appliance.
21. DO NOT expose jars to extreme temperature changes.
22. CAUTION: DO NOT PROCESS HOT FOODS OR HOT LIQUIDS.
23. DO NOT overll.
24. DO NOT operate the appliance empty.
25. If the appliance overheats, a thermal switch will become activated
and shut off the motor. To reset, unplug the appliance and let it cool
down for approximately 30 minutes before using again.
26. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do
not use this appliance for anything other than its intended use. Do not
use outdoors.
27. Appliance accessories are not intended to be used in the
microwave. Do not place the jar or the lid in the microwave as it may
result in damage to the accessories.
28. Check the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
29. Never immerse the motor unit in water or any other liquid, not rinse
it under the tap. Use only a moist cloth to clean the motor unit.
30. Unplug the appliance immediately after use.
31. Keep the appliance out of the reach of children.
32. Always unplug the appliance before you start cleaning the
appliance.
33. Do not use the attachment that other manufacturer produces or
other parts.
34. To avoid occurring danger, please assemble product correctly.
35. Make sure the blade is securely fastened to the accessories before
you assemble them onto the motor unit.
Mini Blender - English manual 5
EN
IMPORTANT SAFEGUARDS (4/4)
36. Extreme caution is necessary when moving any appliance
containing hot liquids.
37. Do not use the jars in microwave.
38. Be careful if hot liquid is poured into the blender as it can be
ejected out of the appliance due to a sudden steaming.
NOTE: The product and its packaging have been manufactured from
valuable materials that can be recycled. This reduces the amount of
refuse and helps to preserve the environment.
Dispose of the packaging in the proper manner. Make use of the local
facilities provided for collecting paper, cardboard and lightweight
packaging by type.
WARNING: Extension cords are not recommended for use with this
product.
PARTS & DESCRIPTION
A Sip & Seal Lid B Blade Assembly
C 0.8L Jar D 0.35L Jar
E Motor Base F Grinding Assembly
G Sealing cup cover
NOTE: Attachments are interchangeable.
The blender is a high powered innovative tool with a compact design
and outstanding performance. It is perfect for ice crushing, chopping,
blending, and nutrient and vitamin extraction. Blend and go with the
convenient Sip&Seal lids, create delicious drinks to get you out the door
quickly! Best results are achieved when you Pulse.
Mini Blender - English manual 6
EN
BEFORE FIRST USE
Before using your appliance for the rst time, it is important that you
read and follow the instructions in this use and care booklet, even if you
feel you are familiar with this type of appliance.
Your attention is drawn in particular to the section dealing with the
appliance. Find a safe and convenient place to keep this booklet handy
for future reference. This appliance has been designed to operate from
a standard domestic power outlet. It is not intended for industrial or
commercial use. Carefully unpack the Appliance. Remove all packing
materials and either discard or retain for future use.
Ensure that the voltage of your electricity supply is the same as that
indicated on the rating label of the appliance. Remove the plastic
accessories and wash in warm soapy water. Dry thoroughly and
replace. Wipe over the exterior of the Motor Base with a damp sponge
or cloth. Do not use abrasive cleaners.
PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND
WHEN USING THE APPLIANCE:
IMPORTANT: Attachments are interchangeable.
CAUTION: Blades are sharp! Use extreme caution when handling the
blade assemblies. Always hold them by the base of the blade assembly.
IMPORTANT: Never run the appliance empty.
CAUTION: Never attempt to remove the jar while the appliance is still
running.
WARNING: Never leave the appliance unattended while in use.
1. Remove all packaging material and labels from the appliance.
2. Wash the lids, jars and attachments in warm, soapy water with
a soft cloth. Use caution when washing the blade assemblies as the
blades are very sharp.
3. Rinse and dry thoroughly
4. Jars, lids and attachments are all dishwasher safe. It is recommended
that the lids and attachments be placed on the top rack. Ensure that
the attachments are removed from the jars before placing in the
dishwasher.
5. Wipe the motor base clean with a damp cloth.
Mini Blender - English manual 7
EN
USE (1/2)
Assembly
Removal
IMPORTANT: Make sure that the motor base is plugged in for use.
1. Place the motor base on a clean, dry, level surface such as a counter
or table top.
2. Make sure the unit is unplugged.
3. Add ingredients to the jar.
4. Place the blade onto the jar and twist it on tightly until you have a
good seal.(Fig. 1)
Mini Blender - English manual 8
EN
USE (2/2)
5. Turn the jar upside down and place it onto the motor base, aligning
the tabs on the jar with the motor base, aligning the tabs on the jar with
the motor base. Turn it clockwise, the unit is ready for use.(Fig. 3)
6. When you have reached your desired consistency, stop the
appliance by turning the jar counterclockwise(Fig. 4) and pull straight
up to remove.(Fig. 5)
NOTE: Do not overll! To avoid spilling, do not add ingredients past
the “Max” ll line.
7. Turn the jar upright and remove the Blade Assembly by twisting the
blade assembly counterclockwise. Be sure to store the Blade Assembly
attached to an empty jar when not in use.
8. Place the Sip & Seal lid onto the jar, twist to seal and enjoy!
9. Make sure that the motor base is unplugged when not in use.
SAFETY FEATURES
Built-in safety lock
The blender has a built-in safety lock feature, this ensures that you can
only switch on the appliance while the cup and the blade subassembly
are assembled on the motor base securely. If the appliance is correctly
assembled, the built-in safety lock will be unlocked.
IMPORTANT: In the base of each blade’s collar, there is a silicone
gasket seal that creates an airtight t with the jars. After dishwashing
and before each use, always check to make sure the gasket is properly
in place, as the heat from some dishwashers may cause the gasket to
become loose.
WARNING: Do not operate the motor continuously for more than
60 seconds at a time. Allow the motor to rest for 180 seconds before
continuing.
NOTICE: If the blade is not running smoothly, stop the product and add
some liquid, or reduce the ingredients in the cup.
NOTE: To prevent product overheating, dry ingredients must not be
processed for more than 30 seconds at a time.
Mini Blender - English manual 9
EN
CARE & MAINTENANCE
HOW TO CLEAN
CAUTION: Make Sure that the motor base is unplugged from the power source
before inserting or removing any attachment and before cleaning.
NOTICE: Wait until the blender has cooled down sufciently before cleaning it.
CAUTION: DO NOT immerse the motor base into water or any liquid, or place
into a dishwasher.
1. Separate/remove all parts from each other.
2. Clean the motor base with a slightly damp cloth and wipe dry
3. Place jars in the dishwasher. Place the lids and attachments on the top rack.
Use caution when handling the blade assemblies as the blades are very sharp.
4. Whenever possible, rinse parts immediately after processing to make cleanup
easier.
5. Store the product in a cool, dry place.
NOTE:
You may also wash the jars by lling the jar to the Max ll line with warm water
and drop of dish washing detergent, placing the blade assembly on the jar and
pulsing a few times. Do not ll the jar more than Max ll line with water because
it will overow. Once clean, remove the jar from the motor base. Rinse the jar,
attachment and lid under running water. Allow all the parts to dry before storing.
Do not use scouring pads, abrasive cleaning agents or aggressive liquids such as
petrol, alcohol or acetone to clean the appliance
All detachable accessories can be cleaned in dishwasher.
Tips:
Use a small brush(not included) to remove particles of food lodged underneath
the blades.
If some leftover particles dry onto the inside of the jar, ll the cup about 2/3 full
with warm water and attach the blade subassembly. Place the jar and blade
subassembly onto the motor base and operate the appliance for about 20-30
seconds to help loosen the stuck ingredients. Repeat the above step but use clean
tap water. Empty blender and dry thoroughly.
CAUTION: Do not try attempt to remove blades from the Blade subassembly for
cleaning.
Mini Blender - English manual 10
EN
HOW TO STORE
1. Store the appliance upright. Do not place anything on top.
2. Store the jars and the rest of the attachments along side the
appliance where they will not be damaged and won’t cause a hazard.
3. Remove and empty the jar and ensure that no food is jamming the
cutting blades.
4. Allow the appliance to cool for approximately 30 minutes.
5. Re-install the jar onto the base and re-plug the appliance into the
electric outlet.
6. Proceed to use the appliance as before while making sure not to
exceed the recommended maximum jar capacities.
Inhaltsverzeichnis
Sprachen:
Andere MOA Mixer Handbücher
