Mobatime DTS 2345.serial Bedienungsanleitung

MOUNTING AND

INSTRUCTION MANUAL

DTS 2345.serial-distributor

Please read these instructions carefully before installation.

Product Certification

STANDARDS

The DTS 2345.serial-distributor was developed and produced in accordance with the EU

Guidelines

2004 / 108 / EC

96 / 48 / EC

References to the Instruction Manual

1. The information in this Instruction Manual can be changed at any time without notice. The cur-

rent version is available for download at www.mobatime.com.

2. This Instruction Manual has been composed with the utmost care, in order to explain all details

in respect of the operation of the product. Please do not hesitate to contact us if you have any

questions. Thank you for reporting any possible mistakes.

3. We do not answer for direct or indirect damages which could occur when using this manual.

4. Read the instructions carefully. Only start setting-up the product if you have understood the in-

formation for installation and operation.

MOSER-BAER AG CH 3454 Sumiswald / SWITZERLAND.

Content

1 Safety ............................................................................................................................................................4

1.1 Safety instructions.....................................................................................................................................4

1.2 Symbols and Signal Words used in this Instruction Manual.....................................................................4

1.3 Intended use..............................................................................................................................................4

1.4 Observe operating safety!.........................................................................................................................5

1.5 Consider the installation site!....................................................................................................................5

1.6 Observe electromagnetic compatibility! ....................................................................................................5

2 Maintenance..................................................................................................................................................6

2.1 Troubleshooting: Repairs..........................................................................................................................6

2.2 Cleaning....................................................................................................................................................6

2.3 Disposing...................................................................................................................................................6

3 General Information - introduction.................................................................................................................7

3.1 Scope of delivery.......................................................................................................................................7

3.2 Device designation in this manual.............................................................................................................7

3.3 Function description..................................................................................................................................7

3.3.1 Signal transmission ........................................................................................................................8

3.3.2 Bridge mode...................................................................................................................................8

3.3.3 Monitoring and alarm system.........................................................................................................8

3.3.4 Display............................................................................................................................................8

4 Configuration, displays and connections.......................................................................................................9

4.1 Status displays on front.............................................................................................................................9

4.2 Inputs – back of case................................................................................................................................9

4.3 Outputs – back of case ...........................................................................................................................10

4.4 Supply .....................................................................................................................................................10

4.5 Alarm relay..............................................................................................................................................10

5 Technical data .............................................................................................................................................11

6 Dimensions of serial distributor...................................................................................................................12

1 Safety

1.1 Safety instructions

Read this chapter and the entire instruction manual carefully and follow all instructions

listed. This is your assurance for dependable operations and a long life of the device.

Keep this instruction manual in a safe place to have it handy every time you need it.

1.2 Symbols and Signal Words used in this Instruction Manual

Danger!

Please observe this safety message to avoid electrical shock!

There is danger to life!

Warning!

Please observe this safety message to avoid bodily harm and injuries!

Caution!

Please observe this safety message to avoid damages to property and devices!

Notice!

Additional information for the use of the device.

1.3 Intended use

The DTS 2345.serial-distributor is a signal distributor for the RS232 and RS422 inter-

faces. The distributor comprises two identical lines, each of which connects their input

interface to three output interfaces.

Please refer to section 3.3 – Function description – for a detailed function description.

1.4 Observe operating safety!

Never open the housing of the device! This could cause an electric short or even a

fire, which would damage your device. Do not modify your device!

The device is not intended for use by persons (including children) with limited physi-

cal, sensory, or mental capacities or a lack of experience and/or knowledge.

Keep packaging such as plastic films away from children. There is the risk of suffo-

cation if misused.

1.5 Consider the installation site!

To avoid any operating problems, keep the device away from moisture and avoid

dust, heat, and direct sunlight. Do not use the device outdoors.

The DTS 2345.serial-distributor is designed for a 19“ rack and should only be oper-

ated installed in a 19“ rack.

By operating the device, the heat sinks attached to the sides get warm.

Make sure there is enough air circulation for the heat to dissipate.

Danger! Make sure

that you wait before using the device after any transport until the device has

reached the ambient air temperature. Great fluctuations in temperature or humidi-

ty may lead to moisture within the device caused by condensation, which can

cause a short.

1.6 Observe electromagnetic compatibility!

The device complies with the requirements of EMC directive 2004/108/EC and

96/48/EC

Caution!

2 Maintenance

2.1 Troubleshooting: Repairs

If you cannot rectify the problems, contact your supplier from whom you have pur-

chased the device.

Any repairs must be carried out at the manufacturer’s plant.

Disconnect the power supply immediately and contact your supplier, if …

liquid has entered your device

the device does not properly work and you cannot rectify this problem yourself.

2.2 Cleaning

Please make sure that the device remains clean especially in the area of the con-

nections, the control elements, and the display elements.

Clean your device with a damp cloth only.

Do not use solvents, caustic, or gaseous cleaning substances.

2.3 Disposing

Device

At the end of its lifecycle, do not dispose of your device in the regular household rub-

bish. Return your device to your supplier who will dispose of it correctly.

Packaging

Your device is packaged to protect it from damages during transport.

Packaging is made of materials that can be disposed of in an environmentally friendly

manner and properly recycled.

3 General Information - introduction

3.1 Scope of delivery

Please check that the delivery is complete and notify your supplier within 14 days of re-

ceipt of the delivery if it is not complete.

In the package purchased by you, you have received:

DTS 2345.serial-distributor

1 actuation tool for spring terminals

3.2 Device designation in this manual

This manual relates to the DTS 2345.serial-distributor. For purposes of better reada-

bility, the designations serial distributor or simply distributor are used in the following

sections.

3.3 Function description

The DTS 2345.serial-distributor is a signal distributor for the RS232 and RS422 inter-

faces.

The distributor comprises two identical lines. Each line has an input interface and three

output interfaces.

Each input and output interface is individually configurable as a RS232 or RS422 inter-

face. It is not imperative for the inputs and outputs to be configured in the same way.

The signals are transmitted transparently, i.e. without changes to content.

The following illustration shows the block circuit diagram of a line. The signal level is

just prepared and monitored.

The following is the block diagram of a line.

35 4 2 1

9 8 7 6

RS232

RS422

TTL

Mode:

RS 232 / RS 422

35 4 2 1

9 8 7 6

RS232

RS422

TTL

Mode:

RS 232 / RS 422

35 4 2 1

9 8 7 6

RS232

RS422

TTL

Mode:

RS 232 / RS 422

Receive

ON / OFF

Receive

ON / OFF

Receive

ON / OFF

LineAOut1

LineA Out 2

LineA Out 3

TX-LED

RX-LED

35 4 2 1

9 8 7 6

RS 232

RS 422

TTL

Mode:

RS 232 / RS 422

LineAIn

3.3.1 Signal transmission

The signal received at the input interface (Rx connection) is transmitted to the down-

stream devices at all three output interfaces (Tx connection).

In the opposite direction, DIP switches may be used to select which of the data re-

ceived at the output interfaces (Rx connection) must be transmitted to the Tx connec-

tion of the input interface.

The user himself is responsible for the prevention of collisions on the backward chan-

nel. In order to do this he must either activate only the backward channel of an output

interface or ensure by appropriate protocols that at all times only one of the connected

devices attempts to communicate with the superior device.

3.3.2 Bridge mode

With the two DIP switches "Bridge Rx In +" and "Bridge Rx In -", the incom-

ing signals of both input interfaces can be connected to each other.

If both incoming signals are connected to each other, the device works as a

1:6 distributor. In this operation mode, the data received at one of the two input inter-

faces is transmitted to all six output interfaces.

The backward channel is not bypassed. Thus only responses from the three output in-

terfaces that are part of the input interface used can be sent back to the superior de-

vice.

If a particularly high number of outputs are necessary, the unused input interface can

be directed as cascading output straight to another serial distributor.

3.3.3 Monitoring and alarm system

The Tx signal of each output interface is compared with the Rx signal of the corre-

sponding input interface. If a discrepancy is detected, for example because the output

contains a short-circuit, an alarm is activated, which in its turn activates the alarm LED

and the alarm relay.

3.3.4 Display

The status of both input interfaces is shown on the front of the distributor by means of

their Rx LED and Tx LED. The status of each output interface is shown on the back of

the case by means of their Rx LED and Tx LED.

4 Configuration, displays and connections

4.1 Status displays on front

On the front of the case the status of the device is displayed by means of six LEDs.

LED

Status

Meaning

Power On The distributor is being supplied.

Off The distributor is not being supplied.

Alarm On At least one active error.

Off No active error.

Input

line A

Rx Data flashing Data is being received (input interface A)

Off No data

Tx Data flashing Data is being sent (input interface A)

Off No data

Input

line B

Rx Data flashing Data is being received (input interface B)

Off No data

Tx Data flashing Data is being sent (input interface B)

Off No data

4.2 Inputs – back of case

Both input interfaces of the serial distributor are

combined in the input field on the back of the case. It

comprises both D-sub connectors for the connection

of the interface, the switches for the configuration of

the inputs and the signal LEDs for controlling the

status of both interfaces

The connectors of both input interfaces have the following pin configuration:

RS422

RS232

- -

Rx+ Rx

Tx+ Tx

- -

GND GND

- -

Tx- -

Rx- -

- -

Both input interfaces can be configured as follows:

Switch

Status

Meaning

1 In A RS422 (OFF) Input A is operated as RS422 interface.

RS232 (ON) Input A is operated as RS232 interface.

2 In B RS422 (OFF) Input B is operated as RS422 interface.

RS232 (ON) Input B is operated as RS232 interface.

3 Bridge Rx In+ OFF Signal Rx+ Line A and B independent.

ON Signal Rx+ Line A and B internally bypassed.

4 Bridge Rx In- OFF Signal Rx- Line A and B independent.

ON Signal Rx- Line A and B internally bypassed.

4.3 Outputs – back of case

Both a line A and a line B output interface are com-

bined in an output field on the back of the case. It

comprises both D-sub 9 connectors for the connec-

tion of the interface, the switches for the configura-

tion of the outputs and the signal LEDs for monitor-

ing the status of both interfaces.

The switches of both output interfaces have the following pin configuration:

RS422

RS232

- -

Rx+ Rx

Tx+ Tx

- -

GND GND

- -

Tx- -

Rx- -

- -

Both output interfaces can be configured as follows:

witch

Status

Meaning

1 Ax RS422 (OFF) Output Ax is operated as RS422 interface.

RS232 (ON) Output Ax is operated as RS232 interface.

2 Disable Rx Ax OFF The backward channel from Ax to input A is disabled.

ON The backward channel from Ax to input A is activated.

3 Bx RS422 (OFF) Output Bx is operated as RS422 interface.

RS232 (ON) Output Bx is operated as RS232 interface.

4 Disable Rx Bx OFF The backward channel from Bx to input B is disabled.

ON The backward channel from Bx to input B is activated.

4.4 Supply

The power supply connector has the following pin configuration:

Terminal

Description

1 DC In+ Input for external DC supply 24-65V

2 DC In- Earth connection for external DC supply

In order to guarantee safe operation with regard to EMC, the device may be optionally

connected to earth via the functional earth port.

4.5 Alarm relay

The alarm relay contacts are configured as follows:

Terminal

Connection

Description

3 Alarm relay opener Opens on alarm

4 Alarm relay closer Closes on alarm

5 Alarm relay changeover Joint pickup

The relay contacts can carry the following loads:

30W (max. 60 VDC or max. 1A) or

60VA (max. 30 VAC or max. 1A)

Fun

ctional earth port

Inhaltsverzeichnis

Andere Mobatime Stromverteilungseinheit Handbücher

Mobatime

Mobatime DTS 2340.irig Bedienungsanleitung

Beliebte Stromverteilungseinheit Handbücher anderer Marken

hager

hager SP 015 Bedienungsanleitung

Pakedge

Pakedge PowerPak 9 Bedienungsanleitung

Pts

Pts 9042 Series Bedienungsanleitung

Shure

Shure WA405 Bedienungsanleitung

CORNING

CORNING CCH 4U Bedienungsanleitung

Panamax

Panamax M4LT-EX Bedienungsanleitung

PANCONNECT

PANCONNECT FLAT 3M Bedienungsanleitung

Raytheon

Raytheon 138-118 Bedienungsanleitung

D&R ELECTRONICS

D&R ELECTRONICS PDU-6SS Bedienungsanleitung

Botex

Botex PSA 322-6 DL Bedienungsanleitung

GE QuiXtra 4000 Kurzanleitung

RDL

RDL EZ Series Bedienungsanleitung

StarTech.com

StarTech.com RKPW161915 Systemhandbuch

Vertiv

Vertiv Knürr DI-Strip Rack PDU Bedienungsanleitung

ABB

ABB PSBS0065 Handbuch

Baumuller

Baumuller BFN 3-1-0007-001 Handbuch

Eaton

Eaton StructuredWiringSolutions ESWT41600 Handbuch

GE GEK-45404F Bedienungsanleitung