Mobi-click Compact IIP+A1 Bedienungsanleitung
Compact IIP+A1
Ver. 1.9xP
User manual
www.mobi-click.com
20.03.2015
Contents
Product description:
General information about the Mobi-Click Compact IIP+A 4
Usage of the Compact IIP+A at home 6
First actions with the device:
Important information 7
Good to know! 9
Change the PIN-code 11
Switching on and off of the device 13
Mobile phone, emergency and alarm system at the same time! 15
Compact IIP+A as a mobile phone:
Saving of the three phone numbers 17
Volumes and ring tones 19
Keypad lock and unlock 20
My first phone call with Compact IIP+A 21
Sending SMS messages with Compact IIP+A 23
Compact IIP+A as an alarm system:
Usage of the Compact IIP+A as an alarm system 25
Saving of personal alarm messages 26
Usage of the Compact IIP+A as an alarm system in diagnose mode 27
Changing of time and date 28
How will I be informed in case of an alarm? 29
I am well! 32
Security zone and localization of people or objects 33
What should I do in case of an alarm? 35
2
Functions of different sensors:
Which sensors should I choose in alarm situations? 37
How do I set the sensitivity of sensors? 38
How can I detect the disappearing of vibrations? 39
Warning actions of the device in case of vibrations 40
How can I connect external sensors? 41
Additional features of the device:
PIN-code –how to protect against outside access? 42
How can I control external device? 43
How can I operate external device? 44
How can I monitor temperature variation? 45
How can I change the quantity of alarm notifications and time? 46
How can I change the duration of eavesdropping? 47
How can I activate the alarm at a definite time? 48
How can I programme the monitoring time, when the time starts 49
after midnight?
Return to factory settings 50
How can I test, if everything is set correctly? 51
Further product information:
Safety information 52
Technical Data 53
Declaration of Conformity 54
3
4
Compact IIP+A works nearly like a usual mobile phone, just much more easier!
You can receive any calls and call three pre-programmed phone numbers directly.
1. Alarm system
As an alarm system it protects you in various situations:
Burglary:
With Compact IIP+A you can protect your vehicle against theft or your apartment, your house or your office
against burglary. In case of alarm you are going to receive up to six SMS or phone calls on your pre-
programmed numbers. You have the possibility to contact undetected Compact IIP+A from any phone and
so listen in the room quietly (see page 36, HEAR and page 46).
You can set many different, individual functions to protect better moving objects (as cars, motorbikes, etc.).
You can also protect your Compact IIP+A with a PIN-code, so that only you or any allowed person can
communicate with Compact IIP+A quietly.
2. Temperature monitoring
Compact IIP+A is suitable also for temperature monitoring in server rooms, computer rooms, weekend
cottage, data processing centre etc.. The temperature range of the sensor is from -40ºC to +100ºC. If the
minimum value or maximum value is exceeded, Compact IIP+A will send an alarm message to all the saved
phone numbers. After reception of an alarm message you can send an SMS command SET (space) RELAIS
and switch by use of our output relays cable (R-115) air condition or other systems on or off. It is also
possible to use our external cable (Z 101-12) as input in the external contact. You can switch a system off
also by sending an SMS command SET (space) EXTERN. Besides you can control and monitor by use of this
monitoring and control system following real estates or systems e.g. holidays cottage, boats, heating
systems, air conditions and solar systems.
Product description
General information about the Mobi-Click Compact IIP+A
55
Product description
General information about the Mobi-Click Compact IIP+A
3. Time switch
Compact IIP+A has a time switch. Thank to this time switch you can programme
alarm times for the whole week before (see page 47).
Compact IIP+A has an external contact. You can connect to this contact either the
Commander CO-116 or the external motion sensor PIR (Z 101-10) with a cable of 2
meters.
4. Commander (option)
By use of the Commander CO-116 you can connect further 10 radio sensors, e.g.
smoke detector, motion sensor, remote control, window or door contact, siren etc..
5. Battery Pack (option)
By use of our battery pack B-121 you can lengthen the standby time many times
over. Far from any socket you are always provided with electrical energy thanks to
our battery pack.
6. Siren (option)
Siren SI-126 is helpful, when it is necessary to discourage the burglar from his
intention or to force him to run away.
6
Product description
Usage of the Compact IIP+A at home
Burglary
With Compact IIP+A you can monitor your apartment, your house or office
Reliably. The motion sensor registers people, which move within a distance
of 5 meters. If a stranger enters the room, an alarm will be caused silently
immediately.
You choose, who will be informed per SMS or call in case of a burglary. Now
you can listen undetected in the room and make the necessary steps.
Range of application: apartment, house, holiday house/apartment, camper,
office, repair shop, atelier, shop, restaurant, garage, etc.
Right placement
The Compact IIP+A has a monitoring radius of approx. 5 meters with an
angle of approx. 80°. To ensure best coverage for monitoring, place the
Compact IIP+A in a corner, preferably facing a door. Do not face the
Compact IIP+A at a window, as movement outside the window can cause
a false alarm.
Attention! In order to ensure the most effective monitoring possible over
the greatest area, position the Compact IIP+A in a place that allows
common access to all rooms (e.g. hallway, stairway, etc.).
7
First actions with the device
Important information
First steps before using the Compact IIP+A
Compact IIP+A possesses an integrated circuit for the protection of the battery from
over and under charging as well as from short-circuit. This protective circuit is activated
with a small slide switch (see design). Ensure that the small slide switch is in ON position.
The device is working only, when the slide switch is moved to ON.
View of the Compact IIP+A
from the rear:
To set the Compact II P in operation (if necessary):
Open the rear cover
Open the SIM-card caddy
Using a pointed tool, move the slide switch to the ON position
Insert the SIM-card
Close the SIM-card caddy
Close the rear cover
Connect the battery charger
A beep signal indicates that the device has successfully started
RESET:
Important information: How to RESET device with rear slide switch
Open the rear cover
Using a pointed tool, move the slide switch to the OFF position for min. 20 sec.
Move the slide switch back to the ON position
Connect operating charger to Compact IIP+A for about 20 sec. (green LED
should light and beep signal will be heard)
After charger disconnecting device is successfully RESET
8
Important information:
1. Leave the Compact IIP+A connected to the battery charger for a minimum of 40 minutes to ensure
that the battery is fully charged.
2. When switching on the Compact IIP+A (with the ON/OFF key) the battery charger can be
disconnected. Once Compact IIP+A is switched on, the battery charger can be connected or
disconnected as required, or be permanently connected. This way a temporally unlimited working time
of Compact IIP+A can be guaranteed (e.g. monitoring during a vacation).
3. The Compact IIP+A allows the user a variety of programming options and adjustments of the device
functions to suit individual requirements of the user. If during the programming you did something
wrong and it seems nothing is going on anymore, it is possible to RESET Compact IIP+A by moving
the RESET switch (located under the rear cover) to the OFF position for a minimum of 5 seconds, and
then to ON again. This does not erase previous settings, but sets the Compact IIP+A ready to
receive new commands. Restart the Compact IIP+A after resetting.
4. When charger is connected to Compact IIP+A, battery will be kept charged all the time.
5. When charger is not connected and battery level falls under 20%, Compact IIP+A will send
LOW BATTERY ALARM only by SMS (see pages 30-31).
6. When Compact IIP+A doesn’t respond to any action (i.e. when it was unused for a long time),
please RESET the device with rear slide switch (see previous page) and apply full charging process.
First actions with the device
Important information
9
First actions with the device
Good to know!
Do not forget to put the spaces between the
single words/digits by writing every kind of
message. On the left please find an example
for SET KEY (see pages 18/19).
Do not forget to put always international
prefixes (e.g. Switzerland: +41)
You can use capital or small letters.
Every new command deletes the old one!
for example:
SET KEY
+41791234567
+41781112345
+41762223344
10
SMS commands consist of 2 words:
1. word: what do I want to do?
SET = switch on
RESET = switch off
TEST = test
2. word: determine situation or sensors
AUTO = vibration sensor - car monitoring
HOME = motion sensor - room monitoring
BABY = noise sensor - baby phone
We will explain further commands in detail gradually.
for example:
RESET AUTO
First actions with the device
Good to know!
Inhaltsverzeichnis
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung