Mobibooth Cruise Series Bedienungsanleitung
Quick Start Guide
Mobibooth Cruise™
Version
Date
Author
Comments
1.0
7-13-22
MAG
Initial release
Version 1 Last modified July 13, 2022 Page 2of 21
Table of Contents
Supported Devices.......................................................................... 4
Introduction .................................................................................... 5
What’s in the Box............................................................................ 6
Unpack and inspect the Cruise™ roamer .................................... 7
Operator Controls......................................................................... 8
Getting Started ............................................................................... 9
Installation of iPad charge cable................................................. 9
Installation of iPad ......................................................................... 9
1. Locate metal plates ............................................................... 10
2. Prepare iPad ........................................................................... 10
3. Metal plate installation .......................................................... 11
4. Remove faceplate .................................................................. 12
5. Connect charge cable ............................................................ 12
6. Install iPad.............................................................................. 13
7. Replace faceplate .................................................................. 14
Recommended Battery Pack..................................................... 14
Bluetooth App Connectivity ......................................................... 15
1. Open the Cloud app................................................................ 15
2. Log into your account............................................................ 15
3. Open RGB LEDS ..................................................................... 16
4. Enable connect to Bluetooth ................................................. 17
Version 1 Last modified July 13, 2022 Page 3of 21
5. Edit app modes ...................................................................... 17
6. Customize LED Fx .................................................................. 18
7. Editing colors ......................................................................... 18
Manual Mode Usage..................................................................... 19
Selecting Attract Mode Pattern................................................. 19
Selecting Attract Mode Pattern................................................. 19
Manual White Light.................................................................... 20
Automatic Mode Usage ............................................................. 20
Supported Fx Patterns............................................................... 20
Version 1 Last modified July 13, 2022 Page 4of 21
Supported Devices
iPad Models
iPad Mini 3
iPad Mini 4
iPad Mini 5
IPad Air 2022
iPad Pro 10.5-inch
iPad Pro 11-inch
Version 1 Last modified July 13, 2022 Page 5of 21
Introduction
Congratulations on your purchase of the new Mobibooth Cruise™ series
hand-held roaming photo booth. These devices make it easy to provide
photo booth services to large events such as festivals and large outdoor
parties with ease. They’ve been purposefully built with ease of use and
ergonomic comfort in mind.
The Mobibooth Cruise™ can operate in two unique modes that include a
decoupled manual mode, where the operator triggers the white light
during photo taking, and fully automatic mode where the app can
change the lights throughout the photo session automatically.
Continue through this manual to learn all about the functionality of your
hand-held roaming photo booth.
Version 1 Last modified July 13, 2022 Page 6of 21
What’s in the Box
In addition to the
Cruise roamer and
carrying case you’ll
find the following
items in the box. The
charge cable used to
power the LEDs and
optionally charge
the iPad along with
a backup.
Two metal plates
with adhesive
backing. Attach to
the back of the iPad
to further secure it.
Spare plastic handle
bolt.
Version 1 Last modified July 13, 2022 Page 7of 21
Unpack and inspect the Cruise™ roamer
When you receive the Cruise™ roamer, immediately unpack it and inspect
for shipping damage.
•Save all packing materials.
•Check all exterior surfaces for damage.
If you discover shipping damage upon inspection:
•Immediately notify the shipping company and file a damage report.
Mobibooth, LLC is not responsible for any damage to the roamer
incurred during shipment, and will not cover the repair of this
damage under its warranty policy.
•Keep all packaging material for shipping company inspection.
•Notify the Mobibooth support team at support@mobibooth.co.
Version 1 Last modified July 13, 2022 Page 8of 21
Operator Controls
•Manual White Light Button - used to manually switch all LEDs to
white.
•Handle - used for holding the roamer.
•5VDC Input Plug - supplies power to the LEDs.
•Manual Pattern Select Button - selects between 13 preprogrammed
pattern/color combinations.
•USB iPad charge passthrough - used to connect iPad power cable
directly to the iPad charge port.
Version 1 Last modified July 13, 2022 Page 9of 21
Getting Started
This section outlines the steps required to set up the Cruise™ roamer for
the first-time use.
Installation of iPad charge cable
This is an optional step that is only necessary if you decide to charge
the iPad during operation.
1. Insert the 2.1mm power connector into the 5VDC input plug.
2. Insert the iPad charge cable (lightning connector/USB-C) into the pass-
through.
3. Pull the iPad charge cable through on the inside.
Installation of iPad
In this section we will discuss preparing the iPad for installation and
installing it with charging.
Version 1 Last modified July 13, 2022 Page 10 of 21
1. Locate metal plates
Locate the two
metal plates
shipped with your
Cruise™ roamer.
2. Prepare iPad
Place the iPad
backside up on a
flat surface.
Inhaltsverzeichnis
Beliebte Tablet-Zubehör Handbücher anderer Marken
Bretford
Bretford PowerRack 10 Bedienungsanleitung
Brenthaven
Brenthaven EDGE 360 Bedienungsanleitung
Fujitsu
Fujitsu Stylistic 3400 Bedienungsanleitung
Heckler Design
Heckler Design WindFall STAND Bedienungsanleitung
Kensington
Kensington KeyFolio SecureBack Bedienungsanleitung
Xplore
Xplore Companion Keyboard Bedienungsanleitung
Logitech
Logitech Ultrathin Bedienungsanleitung
Infinite Peripherals
Infinite Peripherals INFINEA X MINI Bedienungsanleitung
Trust
Trust Executive Folio Stand Bedienungsanleitung
Manhattan
Manhattan 406017 Bedienungsanleitung
Logitech
Logitech SLIM COMBO Bedienungsanleitung
Logitech
Logitech AnyAngle iC1051 Bedienungsanleitung