Mobile CyberNetor ED-35-SRD Bedienungsanleitung
3.5” SATA Dual Bay LANDisk
User Guide
Include
☆ Hardware Overview
☆ Hardware Installation
☆ Web
☆ Raid Mode Selection
☆ Hard Drive Formatting Guide
☆Software Installation Guide
Dual Bay LANDisk User Guide
1
Contents
1. Hardware .................................................................................................................................2
1.1 Power / 1.2 Ports / 1.3 Buttons / 1.4 Leds ....................................................................... 2
1.5 Front / Back View............................................................................................................. 3
2. Installation.........................................................................................................…..………..…4
2.1 Requirements…………………………………………………………………………………….4
2.2 HW Installation………………………………………………………………………...…………4
3. Web..........................................................................................................................................6
3.1 Home ............................................................................................................................... 6
3.2 Administration .................................................................................................................. 6
3.2.1 LAN Settings ..................................................................................................... 7
3.2.1.1 DHCP / 3.2.1.2 Static IP..................................................................... 7
3.2.2 System / 3.2.3 FTP SERVER ......................................................................... 8
3.2.4 USB / 3.2.5 Users……………………………………………………………… 9
3.2.6 Share / 3.2.7 Media ...................................................................................... 11
3.2.8 iTunes…………………………………............................................................... 12
3.2.9 BitTorrent…………………… ............................................................................ 13
3.2.10 Tools---3.2.10.1 Scheduling / 3.2.10.2 Restart / 3.2.10.3 Hard disk Utility.................. 15
3.2.10.4 FW upgrade / 3.2.10.5 Save Config ............................................... 16
3.2.10.6 Factory Default / 3.2.10.7 Login Setting / 3.2.10.8 System Log ..... 17
4. Raid Mode Selection……………………………………………………………………………………..18
4.1 GUI SteelVine Manager Operation………………………………………………………………..18
4.2 Jumper Selection & Storage Policy Definitions…………………………………………………..19
4.2.1 GUI MODE ………………………………………………………………………………..19
4.2.2 JBOD MODE…………………………………………………………………….…………20
4.2.3 BIG MODE………………………………………………………………………………….21
4.2.4 RAID 0 (Fast)……………………………………………………………………..………..22
4.2.5 RAID 1 (Safe)………………………………………………………………………………23
4.2.6 RAID / SAFE33…………………………………………………………………………….24
4.2.7 RAID / SAFE50…………………………………………………………………………………………….25
5. Hard Drive Formatting Guide…………………………………………………………………………..26
6. Software Installation Guide……………………………………………………………………….…….32
Dual Bay LANDisk User Guide
2
1. Hardware Overview
1.1 Power
Receptor for the provided Power Adapter (12V DC, Maximum 4Amps, 100-240V AC, 50-60Hz)
1.2 Ports
LAN Port :
LAN connection.
(Connect the port with RJ-45 cable to your switch or IP
sharing router.)
USB A Port : Connect your USB device to NAS. (Host Function)
(this port with your USB Storage devices or printer.)
USB B Port : Connect your NAS to PC.
e SATA port : Connect your eSATA device to NAS.
1.3 Button (locate on PCB)
IP Rst button :
- Reset the NAS to default IP.
The Default IP will be 192.168.16.1.
(Press and hold the Button to reset all configurations to
factory default settings. )
Fan SW : Fan ON / OFF swith.
RAID Rst SW : Raid setting reset button.
SYS. Rst : System reset button.
1.4 LEDs
Power LEDs Green – System ready.
LAN LEDs Green –Valid Connection at 10/100 Mbps.
RAID ERR LEDs Red – Raid Function error.
USB LEDs Green –Valid connection on USB port.
eSATA LEDs Green –Valid connection on eSATA port.
HDD A / B Link Green – HDD A / HDD B ready.
HDD A / B Act Yellow –Data transmitting on HDD A / HDD B.
Dual Bay LANDisk User Guide
About the 3.5” SATADual Bay LanDisk
1.5. Front / Back View
HDD B Act / Link LEDs
HDD AAct / Link LEDs
POWER Button
POWER LEDs
LAN LEDs
Raid ERR LEDs
USB LEDs
e SATA LEDs
Power DC Jack
System Reset SW
LAN Port FAN
IP Reset SW
USB A Port
USB B Port
e SATA Port
RAID SW FAN ON/OFF SW
RAID Reset SW
3
Dual Bay LANDisk User Guide
2. Installation
2.1 Requirements
The following are required when using the NAS.
•TCP/IP Protocol must be installed in your PC.
•Connect NAS to a switch/hub port to connect your network.
2.2 HW Installation
Hard Drives Installation Guide
STEP1: Push the button and Pull out the tray.
STEP2: Place the HDD into the tray. Screw the HDD on the tray both sides.
4
Dual Bay LANDisk User Guide
STEP3: Push the tray to the end until the HDD is connected with SATA connector.
STEP4: Push tray into Aluminum housing and secure them together.
5
Note
：
Select operation mode first.
Dual Bay LANDisk User Guide
3.Web
Just simply type in the NAS IP (default IP：192.168.16.1) in the browser to enter the NAS web.
3.1 Home
The basic information of the NAS will be shown at here.
3.2 Administration
The username and password will be required when entering this section.
The default username is "admin" and password is "root".
6
Dual Bay LANDisk User Guide
3.2.1 LAN Settings
This section contains all LAN settings to configure the NAS to the network. Depending on how
the network is set up, changes to this page may or may not be necessary. We can choose between
DHCP and Static IP from the “Protocol”
3.2.1.1 DHCP
Selecting this option enables the NAS to request an IP and auto-configure itself to the network if
there is a DHCP Server present.
NOTE：If DHCP Client is enabled, but there is no DHCP server, the IP address will fall back to the
default address 192.168.16.1.
3.2.1.2 Static IP
Click this option if there is no DHCP Server present on the network and manually enter the
network settings in the fields provided below this option.
¾IP Address – Enter the static IP address
¾Subnet Mask – Enter the Subnet Mask address
¾Default Gateway – Enter the Gateway IP address
¾Primary DNS and Secondary DNS(both optional) – If available, enter those IP addresses
here
If you need assistance in manually entering the above information, contact your network
administrator for additional help in configuring the network settings.
7
Dual Bay LANDisk User Guide
3.2.2 System
The basic settings of NAS can be set at here. Including “Device Name”, “Description”, “Date”,
“Time Zone”, “Http Port” and the NTP, FTP server can be enabling or disable in here too.
After the NTP option is enabled, you’ll need to enter a valid NTP server to make it work correctly.
It will get the time from the server. (The selection for the date and time will be close after NTP is
enabled)
We’re allowed to use the FTP to access to the device after enabled too.
PS. The FTP Username and password of admin are, Username: admin, Password: admin
3.2.3 FTP SERVER
The device embeds a FTP server that allows users to access this device by FTP client. To setup the
FTP server properties, please refer to the following table and click “Apply” to execute your settings.
Enable FTP Server: Click “□” to enactive the FTP server function or
disable it.
Port : The Port number of the FTP server.
Default value is 21.
Enable anonymous(as
guest): Allow FTP client to connect with the device
without username/ password authentication.
Client PC’S Language: Select client pc’s Language.
8
Dual Bay LANDisk User Guide
3.2.4 USB
The installed USB hard disk will show in here.
NOTE:
The printer is various in style, therefore the printer function does not guarantee to support
all printers.
3.2.5 Users
A NAS hard disk MUST be installed for this function to work in properly.
Change Password: We can change the user’s password from here (only works if there’s a
user exist).
Delete User:We can delete the useless user’s account from here.
There are two options to choose in here：
Leave user’s share folder for Administrator (read/write)
- This option will move the user’s folder into administrator’s folder, and only
read/writeable for administrator (administrator’s folder will be created automatically at
9
Inhaltsverzeichnis
Beliebte Lagerung Handbücher anderer Marken
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung