Mobilife MPP101 Bedienungsanleitung
DISCLAIMER:
While every effort has been made to ensure that the information in this manual is accurate and complete, no
liability can be accepted for any errors or omissions
ELTRADE reserves the right to change the specifications of the hardware and the software described in this
manual without notice
This document contains information proprietary to ELTRADE Ltd. Sofia, Bulgaria. No part of this publication
may be reproduced, photocopied, stored on a retrieval system or transmitted, without prior written
permission of ELTRADE Ltd. Sofia, Bulgaria.
All products, logos, brand names, or companies are trademarks or registered trademarks of
their respective owners!
CONTENTS
READ THIS FIRST 4
Safety Precautions ........................................... 4
Warnings ........................................................... 4
Cautions ............................................................ 6
Preventing Malfunctioning .............................. 7
INTRODUCTION 8
Unpacking the printer ...................................... 8
Printer Modules ................................................ 8
INSTALLATION AND OPERATION 10
Setting Up ....................................................... 10
Removing the Battery Fresh Seal 10
Charging the Batteries 10
Turning the Printer On and Off ..................... 11
Self Test .......................................................... 11
LED Indication ................................................ 11
Bluetooth Connection Range........................ 12
MAINTENANCE 13
Changing the Paper Roll................................ 13
Cleaning the Print Head................................. 14
Changing the Batteries .................................. 15
TROUBLESHOOTING 17
Installation Instructions................................. 18
Windows 2000/XP Operating System 18
Operating Instructions................................... 20
TECHNICAL SPECIFICATIONS 22
READ THIS FIRST
Safety Precautions
Before using the printer, please ensure that
you have read and understood the safety
precautions described below. Always
ensure that the printer is operated correctly.
The safety precautions noted on the
following pages are intended to instruct you
in the safe and correct operation of the
printer and its accessories to prevent
injuries or damage to yourself, other
persons and equipment.
In the next few pages, the term "equipment"
refers primarily to the printer and its power
supply accessories.
Warnings
Do not attempt to disassemble or alter any
part of the equipment that is not expressly
described in this guide. Internal inspections,
alterations and repairs should be conducted
by a qualified service personnel authorized
by your printer distributor.
Stop operating the equipment immediately
if it emits smoke or noxious fumes. Failure
to do so may result in fire or electrical
shock. Immediately turn the printer's power
off, remove the printer battery and unplug
the power cord from the electrical outlet.
Ensure that smoke or fume emissions have
ceased. Please consult your printer
distributor.
Stop operating the equipment if it is
dropped or the casing is damaged. Failure
to do so may result in fire or electrical
shock. Immediately turn the printer's power
off, remove the printer battery and unplug
the power cord from the electrical outlet.
Do not allow the equipment to come into
contact with, or become immersed in, water
or other liquids. Do not allow liquids to enter
the interior. The printer has not been
waterproofed. If the exterior comes into
4 MPP101 User Manual
READ THIS FIRST
contact with liquids or salt air, wipe it dry
with a soft, absorbent cloth. If water or other
foreign substances enter the interior,
immediately turn the printer’s power off and
remove the printer battery or unplug the
power cord from the electrical outlet.
Continued use of the equipment may result
in fire or electrical shock.
Do not use substances containing alcohol,
benzene, thinners or other flammable
substances to clean or maintain the
equipment. The use of these substances
may lead to fire.
Remove the power cord on a regular
periodic basis and wipe away the dust and
dirt that collects on the plug, the exterior of
the electrical outlet and the surround area.
In dusty, humid or greasy environments, the
dust that collects around the plug over long
periods of time may become saturated with
humidity and short-circuit leading to fire.
Do not cut, damage, alter or place heavy
items on the power adapter cord. Any of
these actions may cause an electrical short
circuit, which may lead to fire or electrical
shock. Replace a broken or damaged
power adapter cord.
Do not handle the power cord if your hands
are wet. Handling it with wet hands may
lead to electrical shock.
Use of power sources not expressly
recommended for this equipment may lead
to overheating, distortion of the equipment,
fire, electrical shock or other hazards. Use
only the recommended power accessories.
Do not place the batteries near a heat
source or expose them to direct flame or
heat. Such exposure may damage the
batteries and lead to the leakage of
corrosive liquids, fire, electrical shock,
explosion or serious injury. Do not immerse
the batteries in water.
MPP101 User Manual 5
READ THIS FIRST
Do not attempt to disassemble, alter or
apply heat to the batteries. There is serious
risk of injury due to an explosion.
Immediately flush with water any area of
the body – including the eyes and mouth, or
clothing – that comes into contact with the
inner contents of a battery. If the eyes or
mouth contact these substances,
immediately flush with water and seek
medical assistance.
Avoid dropping or subjecting the batteries
to severe impacts that could damage the
casings. It could lead to leakage and injury.
Do not short-circuit the battery terminals
with metallic objects, such as key holders. It
could lead to overheating, burns and other
injuries. Use the supplied terminal cover to
transport or store the battery pack.
Before you discard a battery, cover the
terminals with tape or other insulators to
prevent direct contact with other objects.
Contact with the metallic components of
other materials in waste containers may
lead to fire or explosions. Discard the
batteries in specialized waste facilities if
available in your area.
Use of batteries that are not expressly
recommended for this equipment may
cause explosions or leaks, resulting in fire,
injury and damage to the surroundings.
Use only recommended batteries and
accessories.
Disconnect the power adapter from both the
printer and electrical outlet after recharging
and when the printer is not in use to avoid
fire and other hazards. Continuous use over
a long period of time may cause the unit to
overheat and distort, resulting in fire.
Cautions
Avoid using, placing or storing the
equipment in places subject to strong
sunlight or high temperatures, such as the
dashboard or trunk (boot) of a car.
6 MPP101 User Manual
READ THIS FIRST
Exposure to intense sunlight and heat may
cause the batteries to leak, overheat or
explode, resulting in fire, burns or other
injuries. High temperatures may also cause
deformation of the casing. Ensure that there
is good ventilation when using the compact
power adapter to charge the battery pack or
power the printer.
Do not store the equipment in humid or
dusty areas. Storage in such areas could
lead to fire, electrical shock or other
damage.
Preventing Malfunctioning
Avoid Strong Magnetic Fields
Never place the printer in close proximity to
electric motors or other equipment generating
strong electromagnetic fields. Exposure to
strong magnetic fields may cause malfunctions.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and
cold temperatures may cause condensation
(water droplets) to form on its external and
internal surfaces.
If Condensation Forms Inside the Printer
Stop using the printer immediately if you detect
condensation. Continued use may damage the
equipment. Remove the battery or disconnect
the power adapter (if connected) from the
printer and wait until the moisture evaporates
completely before resuming use.
MPP101 User Manual 7
INTRODUCTION
Unpacking the printer
Remove the printer from its carton being careful
not to damage the packing material so that it
may be re-used if the printer is to be
transported in the future.
Make sure that all the components illustrated on
the inside of the packing box are present and
that there are no signs of damage. If any,
contact Customer Service.
Printer Modules
The MPP101 Printer main modules are:
(See Figure 1 and Figure 2)
1. Base
2. Cover
3. Paper Bin
4. Printer Unit
5. Status Led
6. Multifunctional Button
4
3
6
5
1
2
Figure 1. Top View
8 MPP101 User Manual
INTRODUCTION
9
7
8
Figure 2. Bottom View
7. Battery Compartment
8. Belt Clip
9. Battery Fresh Seal
MPP101 User Manual 9
Inhaltsverzeichnis
