8. WT REMOTE CONTROL OPERATION | MOTIONS
Remote control COSMO | WT allows the user two control modes.
Mode 1 - touch - the user issue commands by touching with his finger on the remote’s screen.
Waking up the remote control followed by touching the screen of remote control.
Mode 2 touch with full support for motions - you wake up the remote through both by waving
your hand to the screen of remote control (a distance of about 10 cm) and by the touch. You
issue commands by touching the screen with your finger on the screen of remote control and the
corresponding movement of the hand in front of remote control.
To select a mode, press the P2 button located under the battery cover - Fig. 8a. Activation of
thenext mode is confirmed by lighting up of all control LEDs:
Mode 1 - light up control keys on red - Fig. 8b.
Mode 2 - light up control keys on blue - Fig. 8c.
Fig. 8
P2
a b c
1. In order to control the channel, activate the screen by waving your hand at a distance of
10 cm. The screen will be activated. White color is highlighted in the upper left corner. Wake up
by touching the surface of the remote sends an order to the receiver corresponding to the field.
2. Command ON / UP - you need to make a
movement with your hand from the bot-
tom up in front of the motor. The display
lights up control field on blue color .
WARNING! The return movement
of the hand should be performed
outside the remote control. Otherwise,
the command OFF / DOWN will be
activated.
5
