Others
Symptoms Possible Problems/ Solutions
The RSSI signal
indicator is al-
ways blinking or
does not light.
• This indicates poor reception. Try moving the router
to another location near the window.
• Check the ANT button to see if you have press the
ANT on but without connecting the external antenna.
About the pass-
word
• For the Wi-Fi connection password, please check
the label on the device.
• ThedefaultpasswordofthewebGUIconguration
page is admin.
• If you changed the password and forgot the new
password, you need to restore the device to the fac-
tory default settings.
For more assistance, please:
• Visithttp://www.zte.com.cn
• CallServiceHotline:+86–755–26779999
Warning and Notice
Safety Precautions
• Some electronic devices may be susceptible to electromagnetic
interference. Locate the router away from TV set, radio and other
electronic equipment to avoid electromagnetic interference.
• The router may interfere with medical devices like hearing aids and
pacemakers. Consult a physician or the manufacturer of the medical
device before using the router.
• Please keep yourself at least 20 centimeters away from router.
• Do not use your router in dangerous environments such as oil terminals
or chemical factories where there are explosive gases or explosive
products being processed.
• Please use original accessories or accessories that are authorized by
ZTE. Unauthorized accessories may affect the router performance,
damage the router or cause danger to you.
• Do not attempt to dismantle the router. There are no user serviceable
parts.
• Do not allow the router or accessories to come into contact with liquid or
moisture at any time. Do not immerse the router in any liquid.
• Do not place objects on top of the router. This may lead to overheating
of the device.
• The device must be placed in ventilation environment for use.
• Donotexposetheroutertodirectsunlight orstoreitinhotareas.High
temperature can shorten the life of electronic devices.
• Do not allow children to play with the router or charger.
• Keep the length of the cable between the router and the phone less
than 10 meters. ( Voice calls are not available in Egypt )
• The router is for indoor use only. Do not use the router outside. Do
not connect telephone extensions which run outside of the building.
These can result in lightning damage to your unit. ( Voice calls are not
available in Egypt )
Cleaning and Maintaining
• Use an antistatic cloth to clean the router. Do not use chemical or
abrasive cleanser as these could damage the plastic case. Turn off your
router before you clean it.
• Use the router within the temperature range of -10°C ~ +55°C, and the
storage temperature range is -20°C ~ +65°C. The humidity range is
5%~95%.
• Do not use your router during a thunderstorm. Remove the mains power
pack from the wall socket.
• Do not take out your (U)SIM card unnecessarily. The (U)SIM card may
be easily lost or it can be damaged by static electricity.
Limited Warranty
• This warranty does not apply to defects or errors in the Product caused
by:
i. Reasonable abrasion.
ii. End User’s failure to follow ZTE’s installation, operation or
maintenance instructions or procedures.
iii. End User ’s mishandling, misuse, negligence, or improper
installation, disassembly, storage, servicing or operation of the
Product.
iv. Modifications or repairs not made by ZTE or a ZTE-certified
individual.
v. Powerfailures,surges,re,ood,accidents,actionsofthirdparties
or other events outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-
party products provided that such defects are due to the combined
usage.
vii. Any other cause beyond the range of normal usage intended for the
Product.
End User shall have no right to reject or return the Product, or receive a re-
fund for the Product from ZTE under the above-mentioned situations.
• This warranty is End User’s sole remedy and ZTE’s sole liability for
defective or nonconforming items, and is in lieu of all other warranties,
expressed, implied or statutory, including but not limited to the implied
warrantiesofmerchantabilityandtnessforaparticularpurpose,unless
otherwise required under the mandatory provisions of the law.
Limitation of Liability
ZTEshall notbe liablefor anyloss ofprots orindirect, special,incidental
or consequential damages resulting from or arising out of or in connection
with using of this product, whether or not ZTE had been advised, knew or
should have known of the possibility of such damages, including, but not
limitedtolostprots,interruptionofbusiness,costofcapital,costofsubsti-
tute facilities or product, or any downtime cost.
I hear a rapid engaged
tone as soon as I lift the
phone off the hook. ( Voice
calls are not available in
Egypt )
Put the phone on hook and try again. If you
are connected to the Internet using the 2G
(GSM)network,pleasedisconnectthisrst.
After dialing the last digit I
hear nothing /silence.
Whenyouhavenisheddialingyoucan
press the # key or wait 4-8 seconds to con-
nect the call.
I can’t make or receive a
callwhenIamsurngon
the net. ( Voice calls are
not available in Egypt )
If you are connected using the 2G (GSM)
network then you cannot surf the net and
make a phone call simultaneously. Please
disconnect the Internet and wait 30 seconds
to 1 minute before making a call.
Internet Related Problems
Symptoms Possible Problems/ Solutions
Can not access
the Internet at all.
• Pleasecheckyourcongurationsettings.
• Please wait 1~ 2 minutes for the router to initialize.
• Check your service indicator LED’s.
The download or
upload speeds
are very slow.
The speed is dependent on signal strength. Check
your signal strength and network type.
Can not visit the
webGUIcongu-
ration page
• Enter the correct address. The default address is
http://192.168.0.1.
• Only use one network adapter in your PC.
• Do not use any proxy server.
Can not establish
the Wi-Fi connec-
tion between your
device and client
• Make sure the Wi-Fi function is active. Press the
WPS button to enable Wi-Fi function.
• Refresh network list and select the correct SSID.
• Check the IP address to make sure your client can
obtain an IP address automatically in the Internet
protocol (TCP/IP) properties.
• Type the correct network key (Wi-Fi password)
when you connect to the device.
2. Use your normal Wi-Fi application on the client to search for the
available wireless networks.
NOTE: Please set the client to obtain an IP address automatically, and the
client will get an IP address like “192.168.0.101”.
3. Select the SSID of your device, and then click Connect.
NOTE: Please check the label on your device to get the default SSID and
Wi-Fi password.
4. Input the password, and then click Connect.
NOTE:
You may need to input the password for Wi-Fi connection. Please check
the label on your device to get the default.
5. Wait a moment, and then the client will connect to your device
successfully.
If you want to use WPS function to get the Wi-Fi connection, please:
1. Power on your device, and enable the Wi-Fi function on your device.
2. Enable WPS function. Please check the WPS Setting on the WebGUI
Congurationpage.
3. Press the WPS button on your device to start Wi-Fi Protected Setup
authentication process.
4. Enable the WPS function on your client to respond this authentication
process.
5. Followthesystempromptsonyourclienttonishtheconnection.
Troubleshooting
Voice Related Problems
Symptoms Possible Problems/ Solutions
No Dial Tone.
• Please wait for 1~2 minutes after the
router is turned on.
• If 3G LED light is blinking, you have no
good RF reception. Change the location
of the router.
There is a prompt/ phone
alert/ announcement as
soon as I lift the phone off
the hook. ( Voice calls are
not available in Egypt )
Make sure your (U)SIM card is inserted cor-
rectly and the PIN number has been entered.
If the PIN number has been entered incor-
rectly then you will need to enter the PUK
code when prompted.
The line is noisy/ distorted
when I lift the phone off the
hook. ( Voice calls are not
available in Egypt )
• Remove any electrical appliance which is
too close to the phone or router.
• The cable or phone set might be faulty.
ZTE CORPORATION
NO.55,Hi-techRoadSouth,ShenZhen,P.R.China
Postcode: 518057
