Mobitechplus MW-200 Bedienungsanleitung
1
FCC Compliance andAdvisory Statement.
LABELLING REQUIREMENTS (Part15,Section15.19(a)(3))
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions : (1)this device may not cause harmful interference, and(2)this device must accept
any interference received, including interference that may cause undesired operations.
INFORMATION TO THE USER (Part 15. Section15.105(b))
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one more
of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the receiver.
3) Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
WARNING(Part 15, Section 15.21)
Any changes or modifications not expressly approved by the Jun telecom Inc. could void the
user`s authority to operate the equipment.
Where shielded interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the product,
they must be used in order to ensure compliance with FCC regulations.
Canadian DOC Statement.
Suggested text for the notice indicating compliance with this Standard:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
2
DECLARATION OF CONFORMITY
Manufacturer`s Name MOBITECHPLUS INC.
Manufacturer`s Address 32-5 Songwol-Dong Jongno-Gu, Seoul 110-101, Korea
Declares, that the product
Product Name USB PC CAMERA
Model Name(Number) MW-200
Confirms to the following harmonized European standards have been applied:
EMC : EN55022 : 1998 + A1: 2000 (Class B)
EN55024 : 1998 +A1: 2001 / EN61000-4-2:2001
EN61000-4-2:2001
EN61000-4-3:2001
EN61000-4-4:2001
EN61000-4-5:2001
EN61000-4-6:2001
EN61000-4-11:2001
The product herewith complies with the technical regulations within the scope of
Council Directives, 89/336/EEC and 99/5/EC carries the “CE” mark accordingly.
June ??, 2004 Seoul, Korea
European Contact :
Remark : The EC declaration of conformity similar to above statements shall be provided in
the accompanying instruction manual.
3
INDEX
1. Product introduction 2
1.1 Description 2
1.2 Required system conditions 2
1.3 Components 3
2. Precautions 4
2.1 Warnings at installation 4
2.2 safety instruction 4
3. CD Installation introduction 5
3.1 CD S/W Installation 5
3.2 Driver recognition on Windows 2000/XP 10
3.3 Driver recognition on Windows 98/98SE/ME 13
3.4 Remove software and driver 14
4. WebCAMeye Light Usage 15
4.1 Name 15
4.2 Focus adjustment 16
4.3 Adhesion of the magnetic panel 17
4.4 Set up the options 18
5. WebCAMeye Light S/W Usage 19
5.1 WebCAMeye Usage instruction 19
5.2 EyeImage Usage instruction 26
5.3 EyeChat Usage instruction 27
6. FAQ 31
4
1. Product introduction
1.1 Description
Item Description Remark
Sensor VGA(640ⅹ480) 1/4 inche CMOS Sensor
Pixels 320,000
Minimum
illumination 1.9Lux
Lens F=2.8㎜, f=4.5㎜, 4 element
View angle 53°
Focal range 2㎝~ ∞
Window size
VGA(640ⅹ480),CIF(352ⅹ288),
SIF(320ⅹ240),QCIF(176ⅹ144), QSIF(160ⅹ120)
Format RGB24, I420
Frame per second 30FPS(QSIF), 30FPS(QCIF), 30FPS(SIF),
30FPS(CIF), 15FPS(VGA)
Signal/Noise rate >45㏈
Dynamic range 60㏈
Compress format ISO/IEC 10918-1(JPEG)
Automatic Control
Automatic Exposure, Auto White balance, Auto COMS
reset level control, Automatic Gain Control and
auto/manual Histogram Equalization
Interface USB 1.1
1.2 Required system conditions
Item Required System conditions Remark
O/S Windows 98, Windows 98SE, Windows ME, Windows 2000,
Windows XP
CPU Above the Pentium II 250㎒
MEMORY Above 128M
HDD 100M space (in case of installing the software)
VGA Above the 800ⅹ600ⅹ24bit
USB IBM PC or compatible with USB port
1.3 Components
A
B C
A. WebCAMeye Light Main Body 1 ea
B. Installation CD 1 ea
C. Magnetic panel for adhesion 1 ea
5
2. Precautions
2.1 Warning on installation
• Must install the driver of CD before you
connect the PC camera to the computer.
• Must install the PC camera on the plain surface
firmly with magnetic panel in order for the
camera not to be come off.
• Must get rid of dust and humidity on the
surface which you install the PC camera.
• The problem can be caused if you use expended
USB cable to connect PC & PC camera.
• Please be careful not to pull excessively the
USB cable of PC camera since it can damage (the
cable).
• Please don ’t turn flexible wire of PC camera
2.2 Safty instructions
• Please install the PC camera away from
children’s hands.
• Please tie up the connecting cable of PC and PC
camera short to prevent anyone being entangled by
the cable.
• Please disconnect the PC camera in case of long
term disuse of camera.
• Please not turn iris too much since it can
damage lens or takes the lens out of the body.
• Please use soft cloth when you clean up the
camera.
• Please don’t disassemble the camera.
• Please contact with MTP for A/S or for any
further information.
6
3. CD Installation instructions
3.1 CD S/W installation
You should install the software of CD before you connect WebCAMeye
Light to your computer.
1. The bottom menu will appear automatically when you insert the
CD. ( In case that it does not appear automatically, you should
operate Setup.exe on CD.)
2. The install program will be executed when you click “Software
Install” button. (You may also execute the program operating Setup.exe
inside of software folder of CD.)
•In case that you have used other PC camera,
you should get rid of its driver before you
install WebCAMeye Light PC camera driver.
7
3. Please click the “Next” button.
4. Please accept the use contract and click the “Next” button.
5. Please set up installation folder and click the “Next” button.
8
6. Please click the “Install” button.
7. Please click the “Finish” button when the installation is
completed and appear the bottom page.
8. Then the first page will be appeared as bottom.
9
9. Please click the “Driver Install” button.
10. Please click the “Next” button.
11. Please click the “Continue Anyway” button when the buttom page appear
while installation. (it will not always appear depending on the OS.)
• Above “Windows logo test” warning normally appear
when they didn’t request certifying to Microsoft but
it has no relation to usin
g
our
p
roduct.
10
Inhaltsverzeichnis
