9
Note:
To keep the optimum function of the machine for an extended time, pay attention to the maintenance. Power plug should
be removed from the power socket before starting the maintenance process.
•Do not pull the cable to remove plug from power socket. Pull the plug instead.
•This dispenser has been disinfected before the shipping.
•Clean the hose, water tank, and heating element at least once a year by an expert. This procedure will keep the machine
in its best condition and prolong the life. Do not dissassemble the machine by yourself to avoid damage on the machine.
•Use soft and slightly wet cloth to clean the dispenser surface, and use soft and dry cloth to dry the surface. Do not let
water get into the machine.
•Make sure the power cord is unplugged from the power source when discarding excess water, during maintenance
process, or when the appliance is not used for a long time. Meanwhile, when the hot water to be cold/not hot, open the
drain valve until there is no water in the unit. Meanwhile, if the hot water tap release cold water, let the valve open until
there is no water left inside the dispenser.
•If the display screen shows “ ” empty water icon, that means that the water has run out. Change the water gallon
with the new one immediately.
•In order to ensure the long term normal use of water dispenser, please check the function regularly. When abnormality
occurs; please notify the Modena Service Center.
If abormalities happen when in use, please stop using the appliance and unplug the power cord, and check the
following table to make sure of the appliance’s condition. If necessary, please contact Modena Call Center.
