Moe's AM43 Bedienungsanleitung
AM43 Blind Drive Motor
Manual Instruction
AM43-0.45/
40-ES-EB
Model Input Power Solar panel
specs Lock-rotor
current Speed Range Torque Rated Current Battery Capacity
DC charger
8.4VDC 12V/0.3W 1.8A 20-40rpm 0.45Nm 1A 7.4VDC/
1000mAh
1.Features
2.Motor Specifications
4.Installation
3.Motor Illustration
Motor can set upper & bottom limit positions and limits can be saved even
when motor power off;
Tow running modes: tilting & continuous moving.Motor default mode is
tilting;
Motor can be control by APP on your smart phone;
Bluetooth bi-direction technology,you can see the status of your shades in
anytime;
Motor speed is adjustable on th APP;
Large battery capacity support long time working;
Powered by charger or solar panel,the solar panel with built in light sensor
for auto-control.
Do not exposure it under strong direct sunshine.Keep the
blind engine far away from high temperture or wet place
for using or storing.
UP Indicator Setting button
Solar & sensor connecting port
DOWN
1
2
3
4
5
6
7
1
Blind engine fixing plate installation options
1.3M adhesive 2.Screw fixing
Protection
teeth
Please leave 3-5mm space
between the bottom position
and support bracket during
installation.
4
Connect the solar panel or sensor to blind engine;Please pay attention the
wires in case wires wrapping.
Correct installation
4
Tighten the cords or chains to driving gear.
3
Choose compatible driving gear
Remove the cover plate of driving gear
Thin cord strings and
small bead chains Thick cord strings Large bead chains
2
Enjoy Our Smart Life
Support:
1. Power On/Off
5. Upper limit setting (Motor will automatically exit setting mode after 30'' if motor without receiving any order)
5. Bottom limit setting (Motor will automatically exit setting mode after 30'' if motor without receiving any order)
2. Motor working modes
3. Dot mode/continuous mode switch 4. Change direction
Dot move mode
(apply to venetian blinds,
dual shades,triple shades)
Press the setting button for 7'
Blue indicator slowly
flash for 3 times
(1'1on,1'off)
Continuous
driving mode
Power on
Press the setting button for 1' Blue indicator flash for 2'
Hit the button <1.5",motor
stop whenever you release your hand
keep hitting the button >1.5",motor move straightly
Hit the setting button 5 times
(each hit less then 1s,and every
hit not more than 1s)
Indicator flash blue 3 times.
Now motor working mode switch
Hit the setting button
for 3",motor enter into
setting mode
Hit the setting button
for 3'
Indicator turn red
Indicator turn red
Indicator flash blue 3 times
Now motor save
the upper limit
Please UP button enter
into limit setting mode
Indicator flash
red quickly
Move the motor to
plaesed position
Hit the setting button
for 3",motor enter into
setting mode
Hit the setting button
for 3'
Indicator flash blue 3 times
Now motor save
the upper limit
Please Down button enter
into limit setting mode
Indicator flash
red quickly
Move the motor to
plaesed position
Hit the up and down button
at the same for 3'
Indicator flash blue 3 times.
Now motor dorection change
Hit the button for 1",
motor move directly
Power off
5.Setting Instruction
(Motor will automatically exit programming mode after 30" if motor receiving any order Motor restore
to factory setting will delete all setting you done before)
TIpswich:Motor run in dot move before and after limit set,please
go to dot and confirm(tips:Max 18 letter space limites filling new name)
7. Restore factory setting
Ⅰ. Download APP II. Shades setting
Ⅲ. Change password on APP
Ⅴ. Scenes setting
Ⅳ. Limits setting
Search:Blind engine Tap “+", the APP start to
search devices Tips:the APP
can add maximum 7 devices
You can do various settings
after device connection
Fill a new name on your
device and confirm
(tips:Max 18 letter space
limited filling new name)
Choose the type of your
shade and finish the shades
setting
Indicator turn red Hit the setting
button for 7'
Hit the setting button
for 3",motor enter into
setting mode
Indicator flash blue 3 times
Now motor save
the upper limit
Enter shades setting
interface and choose
“change password”
item
Input the new password,
factory default password
is “8888”
Enter shades setting interface,
choose “upper limit setting”.
Make the shade go to upper
limit position then save the limit
Tip:when you do the limit setting,
motor run in dot move mode.
Enter shades setting interface,
choose “bottom limit setting”.
Make the shade go to upper
limit position then save the limit
Tip:when you do the limit setting,
motor run in dot move mode.
1) Choose “scenes setting”
menu(Tips:Max 6 scenes
can be added)
2) Tap “scene name
setting”
3) Name the scene and
save it
4) Tap “+” on top right
corner to add device
5) Set the favorable
positions and save
6) When you finish adding
devices,tap “save scene”
finish the scene setting
(Tips:Keep holding the
“device”menu can do
other setting operation)
7) Choose the scene and tap
“start scene”. Devices added
to scene will start to run
Ⅵ. Timing setting
Ⅶ. Winter & summer mode setting
Troubles Troubles Reason Elimination MethodNO.
Subscribe here
A.choose proper motor
B.check motor installation
A.power off
B.motor enter overload protection
Connect to charger port
Tips: please check carefully and don't make mistake on the 8.4VDC charger port and sensor connection port 404002(V1.2)
A.overloaded
B.improperly installation make motor stuck
A.power off
B.motor enter overload protection
Put the charged on sensor connection
port
Motor does't work or run slowly
Motor suddenly stop working
Motor does't work when you
charge motor
1
2
3
Before you do the timing setting
1.Timing mode is only available after
the shades finish limit setting
2.Max 4 timing setting can be added
3.Each time turn off the device or the
device power off, the device need to
connect to APP proofread your system
Time
Before you choose a season
mode
1.shades are already set the limits
and installed the light sensor
2.you could only open either winter
or summer mode
First, open the light sensor
detection function, choose
the light intensity by sliding
the bar and save it.
Then choose “start time” or “close
time”. Set the light detection time
and save, for example 9:00-19:00
After you finish the setting,
save the season mode setting
First, move the shade
to favorable position,
then choose the time
you want.
Choose the date and
save the setting
7.Troubles shooting
Thank you for your support and purchase at
we Moes,we are always here for your complete
satisfaction,just feel free to share your great
shopping experience with us.
If you have any other need,please do not hesitate
to contact us first,we will try to meet your demand.
moes
@moessmart
@moes_smart
@moes_smart
@moes_smart
www.moeshouse.com
Please resd the instruction manual carefully
before using the product
Dieses Handbuch passt für folgende Modelle
1
Andere Moe's Motor Handbücher
