5
Installation
Prior to wiring, ensure the power at the circuit breaker is switched off. Two versions are
available, each with optional features: one requires a neutral wire, while the other
operates without a neutral in your switch boxes. Please wire according to the
specifications of the purchased switch.
If you've selected a version that necessitates a neutral wire, confirm the presence of a
Neutral Wire (typically white) in your wall box. If not, consider an alternative location in
your home or seek the assistance of a professional electrician for installation. Note that
wire colors mentioned in this manual are standard but may vary in some households.
Ensure a secure connection of wire conductors. Prior to wiring, confirm the stability of the
Wi-Fi signal, and ensure both your mobile device and Zigbee gateway hub are connected
to the same 2.4 GHz Wi-Fi network.
For those without wiring experience, it is advisable to consult a professional electrician.
Step 1
Turn off the circuit breaker and use an electrical tester to verify the power is off.
Ensure the circuit breaker remains off during the wiring process.
Attention: Before installing or removing the device, disconnect the power supply to
prevent irreversible damage from electric current or potential issues like lamp flashing.
