Moisturnt HY-X500-01 Bedienungsanleitung
Model:
HY-X500-01
Oil DIFFUSER GUIDEBOOK
Aroma Diffuser An instruction manual
Moisturnt is a technology company dedicated to creating a modern smart
lifestyle. We attach great importance to customers' shopping experience.
Customer Support
We offer 100% guarantee on our product and promise that the product
you bought enjoys the following warranty privileges:
30 days
refund or exchange;
90 days
Refund;
One-year
warranty.
30 DAYS 90 DAYS
1
Only the purchase of Moisturnt brand products
can enjoy the above after-sales warranty policy.
We will do whatever it takes to ensure your satisfaction.Please feel free
to contact us if you have any problems.
Email: [email protected]
Note: Please include your order number.
TABLE OFCONTENTS
EN / Page 04~07
DE / Page 08~11
IT / Page 12~15
FR / Page 16~19
Thank you for your purchase!In order to use
the product in a more coforable and safer
way, please read the manual carefully for
correct use.Please keep the manual for future
reference in case of any problem.
Product Diagram
AC ADAPTER Power line
DC plug
Cover
Mist vent
Power supply socket
Fan air intake
Timing
indicator
Atomizer
LIGHT
MIST
HIGH/LOW
LIGHT
60 120 180 ON
HIGH/LOW
MIS T
Features
Product Specification
Input voltage
Rated power
Capacity
12W
500ml
● Utilizing non-heat ultrasonic waves which does not compromise the
healing and natural properties of the oils . Can also be used without oil as a
humidifier
● HIGH Mist and LOW Mist
● Press the LIGHT button to shift from one color to another or set it on a
specific color. Long press the Light button to turn off the light without
affecting the mist.
24V 0.5A
Suitable range 10m²-60m²
04-EN
Remote Controller Introduction:
Note:
Please remove the insulation sheet on the controller when you first use it.
PUSH OPEN
RELEASE
＊UseCR2025battery
Intermittent Mist Button
(mist 20 seconds then
off 20 seconds)
ON/OFF Button Continuous Mist Button
Big/small Mist Button
Timing Button Light Button
Steps of use
LIGHT
60120 180 ON
HIGH/LOW MIST
LIGHT
60 120 180 ON
HIGH/LOW MIST
LIGHT
60 120 180 ON
HIGH/LOW MIST
3.Add 500ml of water and 5-6
drops of essential oil
1.Take off the cover 2.Insert the power cable
4.Re-cover it and press the
mist button,start to use
05-EN
Working hours
■Max. 10 hours
MIST
HIGH/LOW
■
※
※
The amount of mist produced in the beginning is little due to reasons such as water
temperature and quality, and it gradually stabilizes.
The working hours may shorten according to the variations in water temperature, indoor
temperature, and the amount of mist produced.
Short press MIST button for multiple times to switch between 60min , 120min ,180min ,ON,
and then press it for 1s to stop producing mist.
■
■
2 Mist Output Modes: Choose between high and low mist output according to your
preference.
Press HIGH/LOW button for 1s to activate the function, the initial mode is normal mist.
LIGHT
■Press it for lighting.
■Short press LIGHT for 1 second and it beeps before it starts to work, the default
lighting mode is gradual change.
■Short press it for 1 second again to switch to the fixed color mode, and the light
stops changing colors gradually.
■Short press it for 1 second again to choose red, blue, green, light blue, dark
blue, pink purple, and white, each color has two modes – intense or weak.
■Long press LIGHT for 2 seconds to turn off the light.
Other features
■
■
■
The machine will not produce mist without water.
When water reaches the minimum limit, the machine will automatically shut off.
Button sound mute operation:press and hold the "LIGHT" button for 5 seconds
you will hear the sound "beepbeep", the diffuser switch to mute mode.Press and
hold "LIGHT" button for 5 seconds again to recover the sound.
How to use
06-EN
Trouble Shooting
About repairing & spare parts
*Check the water tank inside, if any broken, please stop use and contact the seller
for a replacement.
Water leakage of
the main body
In case of failure, please confirm the following before looking for maintenance
No current, or
just a momentary
current input
■Is there water in the tank? Is water enough?
→
Please add water in the tank.
In shortage of water, press MIST and it beeps for three times before the machine stops.
■Is the connection of the AC adapter OK?
→
Please confirm the connection between the machine and the socket.
To be safer, please unplug the DC plug from the main body, replug it and ensure the input of current.
No mist;
hard to produce mist;
too much mist;
quick power-off
■Is the water enough in the tank?
→
Please add water to the tank.
■Is the water too much in the tank?
→
The mist production may go wrong when the water exceeds 500ml.
■Is the ultrasonic vibrating plate dirty?
→
→
Please clean the inside of the tank.
Power it off, and remove the bubbles around the ultrasonic vibrating plate with cotton bud.
■It is hard to produce mist if the ultrasonic vibrating plate is stuck with bubbles.
■Are the upper case and lower case of the main body properly closed?
→
Make sure that the upper case is closed.
The mist production may go wrong in case that the case of the main body is unfitting with
the bottom base.
■Is the air supply intake dirty?
→
The air supply decreases when there is dust on the air supply intake, and it will become
harder to produce mist.
■High-temperature and lower temperature?
→
<In case of high temperature and humidity>
The amount of mist increases even though the water added exceeds the max. waterline:
500ml. In the 360'mode, the machine may be cut off due to the lack of water, which is
not considered as a failure.
→
<In case of low temperature and humidity>
The amount of mist decreases sometimes, which is not considered as a failure.
*Check the water tank inside, if any broken, please stop use and contact the seller
for a replacement.
Water leakage of
the main body
In case of failure, please confirm the following before looking for maintenance
No current, or
just a momentary
current input
■Is there water in the tank? Is water enough?
→
Please add water in the tank.
In shortage of water, press MIST and it beeps for three times before the machine stops.
■Is the connection of the AC adapter OK?
→
Please confirm the connection between the machine and the socket.
To be safer, please unplug the DC plug from the main body, replug it and ensure the input of current.
No mist;
hard to produce mist;
too much mist;
quick power-off
■Is the water enough in the tank?
→
Please add water to the tank.
■Is the water too much in the tank?
→
The mist production may go wrong when the water exceeds 500ml.
■Is the ultrasonic vibrating plate dirty?
→
→
Please clean the inside of the tank.
Power it off, and remove the bubbles around the ultrasonic vibrating plate with cotton bud.
■It is hard to produce mist if the ultrasonic vibrating plate is stuck with bubbles.
■Are the upper case and lower case of the main body properly closed?
→
Make sure that the upper case is closed.
The mist production may go wrong in case that the case of the main body is unfitting with
the bottom base.
■Is the air supply intake dirty?
→
The air supply decreases when there is dust on the air supply intake, and it will become
harder to produce mist.
■High-temperature and lower temperature?
→
<In case of high temperature and humidity>
The amount of mist increases even though the water added exceeds the max. waterline:
500ml. In the 360'mode, the machine may be cut off due to the lack of water, which is
not considered as a failure.
→
<In case of low temperature and humidity>
The amount of mist decreases sometimes, which is not considered as a failure.
LED
●LED can be used for a very long time, and
doesn't need to be changed. Please understand
that LED cannot be replaced when it cannot light
up due to losses of other parts of the machine.
※For other repairing, please confirm in the
Aftersale Service.
About the dealing of spare parts
●Please contact distributors for the dealing
of spare parts such as the AC adapter.
07-EN
Produktzeichnung
AC-Adapter Stromkabel
DC-Stecker
Cover
Sprayauslauf
Stromanschluss
Ventilatoreinlass
Timer
Anzeige
Zerstäuber
LIGHT
MIST
HIGH/LOW
LIGHT
60 120 180 ON
HIGH/LOW
MIS T
Features
Produktspezifikationen
Eingangsspannung
Nennleistung
Kapazität
12W
500ml
●Das Gerät arbeitet anhand vom nicht-thermischen Ultraschall. Dabei wird das
ätherische Öl nicht zerstört und er kann seine natürlichen Eigenschaften
entfalten. Sie können aber auch kein ätherisches Öl hinzufügen und das Gerät
als Luftbefeuchter verwenden.
● HOHER Nebel und NIEDRIGER Nebe
● Drücken Sie die “LIGHT” -Taste, um von einer Farbe zu einer anderen Farbe
umzuschalten, oder eine bestimmte Farbe festzulegen. Drücken Sie die
“LIGHT” –Taste länger, um die Lichter auszuschalten. Aber das hat keinen
Einfluss auf die Zerstäubung.
24V 0.5A
Geeignete Reichweite 10m²-60m²
08-DE
Fernbedienung Einführung:
Hinweis:
Bitte entfernen sie die isolationsfolie am controller,
wenn sie ihn zum ersten mal verwenden.
DRÜCKEN ÖFFNEN
RELEASE
＊VerwendenSieeine
CR2025-Batterie
Intermittierender Nebelknopf
(Nebel 20 Sekunden,
Dann 20 Sekunden Aus)
An / Aus Schalter Kontinuierlicher
Nebelknopf
GroßEr / Kleiner
Nebelknopf
Timing-Taste Lichtknopf
Bedienungsschritt
LIGHT
60120 180 ON
HIGH/LOW MIST
LIGHT
60 120 180 ON
HIGH/LOW MIST
LIGHT
60 120 180 ON
HIGH/LOW MIST
3. Tanken Sie Wasser und Öl:
500 ml Wasser und 5bis 6
Tropfen Öl
1. Öffnen Sie die Deckel. 2. Schalten Sie das Gerät an.
4. Schließen Sie den Deckel und
drücken Sie die “MIST” -Taste,
um das Gerät zu starten
09-DE
Zeit des Betriebs
■Maximal 10 Stunde.
MIST
HIGH/LOW
■
※
※
Wegen der Wassertemperatur und anderer Gründe sind Aromadampfstahl am
Anfang wenig und im Laufe der Zeit sich aufsteigen und stabilisieren.
Je nach Wassertemperatur, Zimmertemperatur und Aromadampfstrahl
unterschiedlich absteigen
Drücken Sie die Taste MIST kurz wiederholt, um die Modi "60min ,
120min ,180min, ON, OFF" umzuschalten.
■
■
2 Nebelausgabemodi: Wählen Sie je nach Wunsch zwischen hoher und
niedriger Nebelausgabe.
Drücken Sie HIGT/LOW eine Sekund, um das Modell anzuschalten, Das Modell am
Anfang ist immer Aufdauer.
LIGHT
■Drücken Sie die Taste LIGHT, um die Beleuchtung einzustellen.
■Drücken Sie LIGHT eine Sekund.Nach Piepist setzt es im Betrieb. Das Default ist
allmählicher Wechsel.
■Drüken Sie die Taste eine Sekund noch einmal, um eine bestimmte Farbe zu
bestätigen und stabilisierne.
■Drüken Sie die Taste eine Sekund noch einmal, um rot, blau, grün, hellblau, dunkelblau,
rosa und weiß umzuschalten. Bei jeder Farbe gibt es zwei Modi - schwach oder stark.
■Drücken Sie LIGHT 2 Sekunde, um das Licht auszuschalten.
Andere Eingenschaften
■
■
■
Die Maschine erzeugt keinen Nebel ohne Wasser.
Wenn das Wasser die Mindestgrenze erreicht, schaltet sich die Maschine automatisch ab.
Stummschaltung der Taste: Halten Sie die Taste "LIGHT" 5 Sekunden lang
gedrückt. Sie hören d en Signalton. Der Diffusor schaltet in den Stummschalt-
modus. Halten Sie die Taste "LIGHT" erneut 5 Sekunden lang gedrückt, um den
Ton wiederherzustellen.
Wie benutzt man
10-DE
Inhaltsverzeichnis
Sprachen:
