molex MX123 Bedienungsanleitung
MX123 Connection System
User Manual
Revision C –November 15, 2018
MX123 Connection System User Manual - AS-34566-001 2
Table of Contents
Section 1: Product Introduction
Section 2: Product Summary
Section 3: Harness Assembly Instructions
Section 4: Connector Mating Instructions
Section 5: Service Instructions
Section 6: Electrical Continuity Checking
Section 7: Tool Ordering Information
Section 8: Revision History
Section 9: Files
Section 10: Appendix A - Document Change History
Section 11: Appendix B - Cleaning Instructions
MX123 Connection System User Manual - AS-34566-001 3
The Molex MX123 Connection System is a sealed system consisting of a
header/controller, mating connectors, and terminals with the following
configuration options:
A. 80-Ckt ~ (80) 0.64mm terminals
B. 73-Ckt ~ (72) 0.64mm and (1) 2.8mm terminals
C. 56-Ckt ~ (56) 0.64mm terminals
D. 49-Ckt ~ (48) 0.64mm and (1) 2.8mm terminals
E. 18-Ckt ~ (16) 0.64mm and (2) 6.3mm terminals
F. 10-Ckt ~ (8) 2.8mm and (2) 6.3mm terminals
HIGHLIGHTS:
This system has multiple keying options.
Ground blade engages before signal pins contact.
Connector is friendly to “blind-mate” conditions.
Connector provides temporary retention to the header before the cam assist
lever arm is activated.
Cam assist lever arm remains in pre-lock position until the harness
connector is in pre-lock position on the header/controller.
CPA remains in pre-lock position until cam assist lever arm is locked closed.
Available with molded-in grommet seal plugs for harness customization.
Section 1: Product Introduction
MX123 Connection System User Manual - AS-34566-001 4
Lever
Slides
Dress Cover
(Shipped Separately)
Grommet Seal
Connector Position
Assurance (CPA)
Connector Housing
Terminal Position
Assurance (TPA) Perimeter Seal
Grommet Cap
Section 2: Product Summary: 18/73/80-Ckt
MX123 Connection System User Manual - AS-34566-001 5
Section 2: Product Summary: 49/56-Ckt
49/56-Ckt Exploded View
Lever
Slides
Dress Cover
(Shipped Separately)
Connector Position
Assurance (CPA)
Grommet Seal
Grommet Cap
Perimeter Seal
Terminal Position
Assurance (TPA)
Connector Housing
MX123 Connection System User Manual - AS-34566-001 6
Section 2: Product Summary: 10-Ckt
10-Ckt Exploded View
Lever
Slides
Dress Cover
(Shipped Separately)
Connector Position
Assurance (CPA)
Perimeter Seal
Terminal Position
Assurance (TPA)
Connector Housing
MX123 Connection System User Manual - AS-34566-001 7
Section 2: Product Summary
MX64 Receptacle Terminal
Correct Orientation 90° Misorientation
Lock-out 180° Misorientation
Lock-out
Orientation Tab
Orientation of receptacle terminal during insertion to connector
MX123 Connection System User Manual - AS-34566-001 8
Section 2: Product Summary
MX64 Receptacle Terminal
Terminal Grip Code “A”:
22 GA. Wire Terminal Grip Code “B”:
18/20 GA. Wire
Grip Codes
Visibly Bigger!
MX123 Connection System User Manual - AS-34566-001 9
Section 2: Product Summary
2.80mm Receptacle Terminal
(Yazaki Terminal and Cable Seal)
7116-4152-02 Yazaki 2.8mm RCPT TERM Tin 14 Cable Seal
Correct Orientation 180° Misorientation
Lock-out
90° Misorientation
Lock-out
Orientation Tabs
Orientation of receptacle terminal during insertion to connector
MX123 Connection System User Manual - AS-34566-001 10
Section 2: Product Summary
2.80mm Receptacle Terminal
(Aptiv Terminal and Cable Seal)
P/NXXXXX Aptiv 2.8mm RCPT TERM Tin 14 Cable Seal
Two (2) possible orientations of receptacle terminal during insertion to
connector
Conductor crimp
up Conductor crimp
down
No Orientation Tabs
Inhaltsverzeichnis
Andere molex Kabel und Steckverbinder Handbücher
molex
molex EXTreme PowerMass 75555 Series Bedienungsanleitung
molex
molex Mini50 series Benutzerhandbuch
molex
molex Milli-Grid Dual row 87568 Series Bedienungsanleitung
molex
molex Shielded DataGate Bedienungsanleitung
molex
molex Pico-Lock 1.0 Betriebsanleitung
molex
molex CLIK-Mate 1.5 SINGLE Series Bedienungsanleitung
molex
molex PicoBlade 1.25 W/W Benutzerhandbuch
molex
molex PicoBlade 1.25 DIP Benutzerhandbuch
molex
molex HDAC .64 Series Bedienungsanleitung
molex
molex IP67 Bedienungsanleitung
