MoMi LIMURU Bedienungsanleitung
Simply together
DETSKÝ KOČÍK
SK
BABAKOCSI
HU
PASSEGGINO
IT
CARRITO DE BEBÉ
ES
ПРОГУЛОЧНАЯ КОЛЯСКА
RU
LIMURU
WÓZEK
PL
STROLLER
EN
DE
POUSSETTE
FR
DĚTSKÝ KOČÁREK
CZ
KINDERWAGEN
www.momi.store
www.momi.store
2
MANUAL |INSTRUKCJA |HANDBUCH |INSTRUCTIONS |NÁVOD
| POUŽÍVATEĽSKÁ PRÍRUČKA |ÚTMUTATÓ | MANUALE D’USO |
MANUAL DE USUARIO |ИНСТРУКЦИЯ
Simply together
www.momi.store
EN
PL
DE
FR
CZ
SK
HU
IT
ES
6-10
10-14
15-19
19-24
24-28
28-33
33-37
37-41
42-46
46-51
RU
3
AD
E
F
G
H
N
I
M
L
J
K
C
B
O
4
1 2
3 4 5 6
11 12
10
7 7 8
ab
9
9
a
b
5
13 14 15
1817
16
2120
19
a
19
b
24 25
22
26
23
27
28
EN6
EN
Dear Customer,
Thank you very much for purchasing the MoMi 2in1 LIMURU stroller. We hope that the purchased product
meets your expectations.
In the interest of children’s safety, please read the operating instructions carefully and follow its recom-
mendations in order to use the product safely. The person performing the assembly must be an adult
who will use all the components of the product in accordance with the instructions for use and their
intended use in order to prevent injuries to the child.
IMPORTANT:
Remember to remove and throw away all the packaging elements that were attached to the product, so
that they do not remain within the reach of a child (e.g. cardboard elements, plastic lms, etc.). This could
cause a risk of harm, e.g. choking on the child, suffocation for the child. We recommend that you keep
this manual for future reference, to read, if necessary, what to do in the event of an emergency or for
proper maintenance.
PLEASE NOTE:
Drawings and photos are for reference only. The actual appearance of the product may differ from the
visualization in the manual.
WARRANTY:
The manufacturer provides a 2-year warranty on the product and a 6-month warranty on the
accessories.
WARRANTY EXCLUSIONS AND LIMITATIONS:
We are responsible for the quality of our products. Our warranty does not include damages caused by
improper use of the product or mechanical damages.
TAKE CARE OF THE ENVIRONMENT:
When you stop using the product, please dispose of it at an appropriate facility in accordance with local
laws.
IMPORTANT! PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE SAFETY NOTES AND
PRECAUTIONS.
WARNINGS!:
• Never leave your child unattended.
• Make sure all locking devices are turned on before use.
• Do not let a child play with this product.
EN 7
• To avoid injuries, make sure your child is in safe distance when it unfolds or folds this product.
• Do not let a child play with or in the vicinity of this product.
• The brakes should be locked when putting in and taking out your baby.
• Use the most recline position for the new born babies.
• This product is not suitable for running or skating.
• Check that the seat mounting devices are properly engaged before use.
• The product is intended for children from 0 to 36 months of age, up to a weight of 15 kg.
• The product is intended for the transport of one child at a time.
• Maximum load on the basket under the stroller up to 2 kg.
• The brakes should be locked when putting in and taking out your baby.
• Each additional load suspended on the handles of the stroller makes it lose its stability.
• Only use parts and accessories that have been supplied or recommended by the manufacturer.
• Do not place the product near an open ame or other heat sources.
• Do not leave the stroller on slopes, even with the brake applied.
• Regularly check the technical condition of the stroller.
• Do not use the stroller on uneven surfaces, near re or other hazardous places.
• Do not use the stroller on stairs. Fold the stroller before going down or up stairs.
• Additional luggage put in the stroller may lead to the loss of its stability.
• Do not use the product if you are in any doubt about the correct operation of the wheelchair or its
safety.
• The stroller is compatible with car seats that have a universal fastening system.
• For car seats used in conjunction with a chassis, this vehicle does not replace a cot or a bed. Should
your child need to sleep, then it should be placed in a suitable pram body, cot or bed.
• When using the stroller in combination with a car seat, refer to the instructions of the car seat
manufacturer.
PRODUCT COMPONENTS:
A. Folding button
B. Canoppy with extension part
C. Bumper
D. Push handle
E. Frame
F. Gondola / Seat
G. Textile basket
H. Rear wheel brake
I. Rear wheels
J. Front wheels
K. Seat belts
ACCESSORIES FOR THE STROLLER:
L. Sleeping bag
M.Bag
EN8
ASSEMBLING AND USE:
1. Before assembling, make sure that nothing is missing
2. Place the frame on a at surface and unlock the frame lock button (as shown at picture 1-2).
3. Grab the handle and pull it upwards to unfold the frame (as shown at picture 3-4).
4. To install the rear axle with brake, the frame should be positioned as shown at picture 4 and insert
the plastic holes at both ends of the brake (as shown at picture 5) into the metal tube of the frame
until you hear a click (as shown at picture 6)
5. Install the rear wheels by inserting them into the holes on the rear axle until you hear a click, then
you are sure that the wheels are properly and securely assembed (as shown at picture 7-8).
6. To install the front wheels, insert them into the holes in the front of the frame until you hear a click,
then you can be sure that the wheels are properly and securely assembled (as shown at picture
9-10)
7. To remove the front wheels, press the quick release button (as shown at picture. 9b)
8. To remove the rear wheels, press the lock button and pull the wheels out of the holes (as shown at
picture 7b)
9. To embed the carrycot, put it on the stroller frame as shown at picture 11
10.Place the carrycot on a at surface. Press the footrest adjustment buttons (as shown at picture 11) to
unfold the carrycot. Before installing the carrycot on the stroller frame, attach the Velcro fasteners
to the metal rod on the bottom of the carrycot and leave it unfolded. When mounting the gondola
on the trolley frame, attach it to the designated holes on both sides of the stroller frame until a
characteristic click
11. The stroller is ready for use as a deep gondola.
STROLLER:
12. If you want to use the stroller as a pushchair, install the bumper by inserting its ends into the plastic
tubes in the center of the carrycot (as shown at picture 12-13) until you hear a click
13. Adjust the seat by pressing the large, round buttons on the sides of the carrycot (as shown at
picture 14)
14. To adjust the footrest, fasten the buckles at the ends of the footrest adjustment straps on the
bottom right and left of the carrycot. The footrest will lift up (as shown at picture 15-16).
15. Repeat with the next pair of clamps in the opposite direction
16. Unfasten the Velcro fasteners on the metal bar on the underside of the carrycot. Slide the metal
bar towards the footrest, thus creating the seat of the pushchair.
17. Adjust the backrest to the child’s needs by loosening or tightening the buckle on the backrest of the
stroller (as shown at picture 17-18). To do this, press the button on the belt buckle and pull it up or
down
USE OF THE BRAKE:
This stroller is equipped with a foot parking brake on the rear axle. Press the brake pedal downwards (as
shown at picture 19a) so that the brake is activated. Unlocking takes place after lifting the pedal up (as
N. Mattress
O. Car seat adapters
EN 9
shown at picture 19b).
ADJUSTMENT OF CUSHIONING:
This stroller has a two-stage shock absorption adjustment (as shown at picture 20-21). The adjusting
levers are located on the underside of the brake rear axle just below the springs (as shown at picture
21). When driving on uneven surfaces, pull the lever rmly towards the rear axle until it locks. In this
position, the shock absorbers will smooth out any unevenness. When riding on a at surface, rmly pull
the button in the opposite direction until it locks and the spring visibly tightens. In this position, the shock
absorbers will provide greater stability.
INSTRUCTIONS FOR USE OF THE SEAT BELTS:
The product is equipped with 5-point seat belts. In order to fasten the safety belts place both shoulder
straps buckles in the crotch strap buckle. Press down and make sure that they are properly fastened (as
shown at picture 22).
To unfasten the seat belts, press the button on the crotch strap buckle (as shown at picture 23).
The straps can be adjusted (as shown at picture 22) to t your child properly, but be careful so that the
baby is not too tightly compressed and can breathe freely. When fastening a seat belt, pay attention that
the child’s hands are not near the buckle.
Fasten all belts with a buckle and cover with a mattress.
Always use a clasp system.
Straps Removal (for cleaning): Remove the shoulder straps, lap straps and crotch straps from the holes
by pushing the plastic hooks inwards. Assembly is the reverse way. After assembly, make sure that the
plastic hooks securely block the straps.
ASSEMBLY AND ADJUSTMENT OF THE CANOPY:
To install the canopy, zip it around the inside of the carrycot. Tighten the clasps of the visor on the frame
so that the pins go into the holes. The canopy has the option of increasing the coverage area of the
gondola and the seat. To do this, open the lock on the outside of the roof (as shown at picture 24-25).
ASSEMBLY OF THE LEG COVER:
Attach the foot cover using the zipper on the inside of the seat. Close the zipper and close the Velcro
cover on the safety bar.
ADJUSTING THE HEIGHT OF THE SEAT BELTS:
The straps of the safety belts have a 3-step height adjustment to better adapt them to the child’s needs.
To change the height, unclip the buckle by sliding it from the bottom of the backrest with one hand and
pull it out on the other side. Select the height at which you want to mount the belts, and then pass the
buckle through the hole in the fabric and pull it through the backrest until it locks on its back.
PL10
ATTENTION!
Check that the seat belt is properly locked on the back of the seatback.
DISASSEMBLING THE STROLLER:
Remove the seat / carrycot from the frame. Press the lock button in the center of the pushchair handle,
turn the plastic handle towards the hood and pull the handle downwards (as shown at picture 26-28).
ATTENTION!
Do not disassemble the stroller without the carrycot / seat removed.
CLEANING AND MAINTENANCE:
Periodically check the technical condition of the trolley for damage or missing parts.
Stop using the wheelchair if any part is missing or damaged.
The product should be cleaned with a damp cloth with a mild soap solution.
If the product frame has been exposed to salt solution, clean the product as soon as possible with a
damp cloth with a soap solution.
If the cart is wet, leave it unfolded until it is dry to prevent mold growth.
Never leave the stroller in a humid or hot environment.
Thank you for reading the manual. Please keep it for future reference.
PL
Szanowny Kliencie,
Bardzo dziękujemy za zakup wózka 2w1 LIMURU. Mamy nadzieję, że zakupiony produkt spełnia Twoje
oczekiwania. W przypadku dodatkowych pytań zapraszamy do kontaktu za pośrednictwem strony
internetowej www.momi.store.
W trosce o bezpieczeństwo dzieci prosimy o precyzyjne zapoznanie się z instrukcją obsługi oraz o
stosowanie się do jej zaleceń, w celu bezpiecznego korzystania z produktu. Obowiązkowo osobą
dokonującą montażu musi być osoba dorosła, która wykorzysta wszystkie elementy składowe produktu
zgodnie z instrukcją obsługi i ich przeznaczeniem aby nie dopuścić do obrażeń dziecka.
WAŻNE:
Pamiętaj by usunąć i wyrzucić wszystkie elementy opakowania, które były załączone do produktu,
tak aby nie pozostały w zasięgu dziecka (m.in. elementy kartonu, plastikowe folie itp.). Mogłoby to
EN /
Inhaltsverzeichnis
Sprachen:
Andere MoMi Kinderwagen Handbücher
