Monoprice Stage Right 612749 Bedienungsanleitung

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these

safety warnings and guidelines. Please keep this manual in a safe place for future reference.

Prior to operation, check the unit and power cord for physical damage. Do not use if

physical damage has occurred.

Before plugging the unit into a power outlet, ensure that the outlet provides the

same type and level of power required by the device.

This device uses a grounded power cord and requires a ground connection for safe

operation. Ensure that the power source has a proper ground connection. Do not

modify the plug or use a "cheater" plug to bypass the ground connection.

This device has no user serviceable parts. Do not attempt to open, service, or

modify this device.

Do not look directly into the light source.

Keep the original packaging material for use when transporting the device.

If the device will not be used for any lengthy period of time, it should be unplugged

from the wall.

When installing this device, ensure that the mount is sufficiently robust to support

the weight of the unit and to prevent unwanted movement.

INTRODUCTION

This light features nine 10-watt RGBW LEDs and has several built-in programs for dimming

and strobe effects, including a Strobe Follow mode, which allows multiple lights to strobe

in sequence, rather than all at the same time. It also supports standard DMX-512 control

signals for use as part of a larger light production.

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering,

purchasing, and delivery experience is second to none. If you have any problem with your

order, please give us an opportunity to make it right. You can contact a Monoprice

Customer Service representative through the Live Chat link on our website

www.monoprice.com or via email at [email protected]. Check the website for

support times and links.

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x Flat PAR stage light

1x AC power cord (NEMA 5-15P to IEC 60320 C13)

1x User's manual

CONTROLS AND MENU DISPLAY

The 4-digit LED display indicates the mode and the value for the selected function or

mode.

Press the MENU button to cycle

through the various modes and

functions.

Press the UP button to increase

the value of the selected function

or mode. Press and hold the

button to rapidly increase the

displayed value. The list will cycle

back to the beginning after the maximum value is reached.

Press the DOWN button to decrease the value of the selected function or mode.

Press and hold the button to rapidly decrease the displayed value. The list will cycle

back to the end after the minimum value is reached.

Once the desired value is displayed, press the ENTER button to set that value for the

displayed function or mode and allow for selection of another function or mode.

If you want to discard any changes made to the value of the selected function or

mode, simply press the MENU button to cycle to the next function or mode in the

list.

MENU MODES

Menu Display

Value Range

Function

d.001

001 ~ 512

DMX channel selection

hoSt or SLAu

Host (Master) or Slave mode

Eo.01

01 ~ 32

The total number of follow mode devices*

E-.01

01 ~ 32

Follow mode ID**

EE.00

00 ~ 08

Strobe follow mode color selection

09 ~ 21

Strobe follow mode effect selection

Recycle effect

t.000

000 ~ 255

Strobe follow mode speed (slow to fast)

A.000

000 ~ 255

Four color jumping change (slow to fast)

C.000

000 ~ 255

Full color jumping change (slow to fast)

J.000

000 ~ 255

Full color gradient mode (slow to fast)

L.000

000 ~ 255

Variable pulse mode (slow to fast)

n.000

000 ~ 255

Jumping change, gradient, and variable pulse

modes combined (slow to fast)

P.000

000 ~ 255

Gradient fast strobe mode (color change speed)

1S.00

00 ~ 20

Sound activated strobe mode (sensitivity)

2S.00

00 ~ 20

Sound activated jumping change mode

(sensitivity)

r.000

000 ~ 255

Red dimming (0 ~ 100%)

G.000

000 ~ 255

Green dimming (0 ~ 100%)

b.000

000 ~ 255

Blue dimming (0 ~ 100%)

u.000

000 ~ 255

White dimming (0 ~ 100%)

F.000

000 ~ 255

Strobe mode (slow to fast)

*Set this value to the total number of devices in Strobe Follow mode. Each device must be

set to the same value.

**This value represents the position of the current device within the Strobe Follow mode

sequence. Each device must be set to a unique value. The values set must be equal to or

less than the total number of Strobe Follow mode devices set using the Eo parameter.

Note that this menu selection is only available when the Eo parameter is set to a value

other than 1.

STROBE FOLLOW MODE EXAMPLE

As an example of setting the Eo and E- values, let's assume that you have four lights that

you want to strobe in sequence. Set the lights to use the following Eo and E- values:

Light #

Eo Value

E- Value

Eo.04

E-.01

Eo.04

E-.02

Eo.04

E-.03

Eo.04

E-.04

DMX CONTROL

Channel

DMX Values

Control Functions

000 ~ 255

General dimming (0 ~ 100%)

000 ~ 255

Red dimming (0 ~ 100%)

000 ~ 255

Green dimming (0 ~ 100%)

000 ~ 255

Blue dimming (0 ~ 100%)

000 ~ 255

White dimming (0 ~ 100%)

000

No strobe

001 ~ 255

Strobe speed (slow to fast)

000

Macro function off

001 ~ 029

Four color jumping change mode

030 ~ 059

Full color jumping change mode

060 ~ 089

Full color gradient mode

090 ~ 119

Variable pulse mode

120 ~ 149

Jumping change, gradient, and variable pulse modes

combined

150 ~ 179

Gradient fast strobe mode (color change speed)

180 ~ 199

Save disabled

200 ~ 229

Strobe follow mode color selection (1 ~ 9)

230 ~ 243

Strobe follow mode effect selection (1 ~ 13)

244 ~ 245

Recycle effect

246 ~ 250

Sound activated strobe mode (sensitivity)

251 ~ 255

Sound activated jumping change mode (sensitivity)

000 ~ 255

Macro function LED speed (slow to fast)

MASTER/SLAVE OPERATION

Multiple lights can be daisy chained together, with one serving as the master and the

others configured as slaves to perform whatever actions are performed by the master unit.

The master light must be set to Host mode and then can be in any mode except DMX

mode, while all the slaves must be set to Slave mode and then set to DMX mode, using the

address d.001.

Note: If the daisy chain is longer than 60 meters or if it contains 20 or more light fixtures, a

DMX signal amplifier should be used to ensure that all devices get valid instruction

signals.

Note: The last device in any DMX chain must be terminated using a DMX Terminator. You

can purchase a DMX terminator (PID 601600) from Monoprice or you can make a

DMX terminator using a standard XLR male plug (PID 601651) by soldering a 120 ohm

(1/4 watt) resistor between pins 2 and 3.

3-PIN XLR TO 5-PIN DMX CONVERSION

While most DMX compatible equipment uses 3-pin XLR connectors, some devices use the

official 5-pin DMX connector. To make a 3-pin to 5-pin converter simply make a cable with

a 3-pin XLR connector on one end and a 5-pin DMX connector on the other. Connect the

pins as follows:

3-pin XLR to 5-pin DMX Adapter

Signal

3-pin XLR

5-pin XLR

Ground/Shield

Data Complement (- signal)

Data True (+ signal)

Do Not Use

TROUBLESHOOTING

Following are some common problems and common solutions.

Problem:

The light will not turn on.

Solutions:

Check to ensure the power cord is connected to a power outlet.

Check to ensure that the connected outlet has available power.

Problem:

The light will not execute DMX instructions.

Solutions:

Check to ensure that the light is connected to the controller via a DMX cable.

Check to ensure that the DMX chain is properly terminated.

Check to ensure that the DMX cable is good; swap out a known good cable to test.

Check to ensure the light is in DMX mode (001 ~ 512).

Check to ensure the DMX controller is operating properly.

If you experience other problems with this light and cannot solve them on your own,

please contact Monoprice Technical Support for assistance.

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with any

questions you may have about installation, setup, troubleshooting, or product

recommendations. If you ever need assistance with your new product, please come online

to talk to one of our friendly and knowledgeable Tech Support Associates. Technical

support is available through the online chat button on our website www.monoprice.com or

through email by sending a message to [email protected]. Check the website for

support times and links.

SPECIFICATIONS

Model

612749

Lamp Type

9x 10-watt RGBW 4-in-1 LEDs

Control Modes

Stand alone, sound activated, DMX512

DMX Channels

Input Voltage

90~ 240 VAC, 50/60 Hz

Maximum Power Consumption

90 watts

Dimensions

9.8" x 3.9" x 9.8" (250 x 100 x 250 mm)

Weight

2.6 lbs. (1.2 kg)

REGULATORY COMPLIANCE

Notice for FCC

This device complies with Part 15 of the FCC rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

Modifying the equipment without Monoprice’s authorization may result in the equipment

no longer complying with FCC requirements for Class A digital devices. In that event, your

right to use the equipment may be limited by FCC regulations, and you may be required to

correct any interference to radio or television communications at your own expense.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a commercial installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interference at his own

expense.

Notice for Industry Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

EU Conformity with applicable directives

This equipment complies with the essential requirements listed below:

EMC Directive 2004/108/EC

Low Voltage Directive 2006/95/EC

RoHS Directive 2011/65/EU

WEEE Directive 2011/65/EU

Inhaltsverzeichnis

Andere Monoprice DJ-Equipment Handbücher

Monoprice

Monoprice 612265 Bedienungsanleitung

Monoprice

Monoprice 612760 Bedienungsanleitung

Monoprice

Monoprice 614700 Bedienungsanleitung

Monoprice

Monoprice 612800 Bedienungsanleitung

Monoprice

Monoprice 612740 Bedienungsanleitung

Monoprice

Monoprice 614305 Bedienungsanleitung

Monoprice

Monoprice Stage Right 612785 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung