Monoprice Stage Right STi12 Bedienungsanleitung

STi12 2x2 USB Audio Recording Interface

P/N 625909

User's Manual

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device,

paying extra attention to these safety warnings and

guidelines. Please keep this manual in a safe place for future

reference.

•This device is intended for indoor use only.

•Do not expose this device to water or moisture of

any kind. Do not place drinks or other containers

with moisture on or near the device. If moisture

does get in or on the device, immediately remove

it from its power source and allow it to fully dry

before reapplying power.

•Do not touch the device or any connected cables

with wet hands.

•Do not expose this device to excessive vibration,

extreme force, shock, or fluctuations in

temperature or humidity.

•Do not expose this device to excessively high

temperatures. Do not place it in, on, or near a heat

source, such as a fireplace, stove, radiator, etc. Do

not leave it in direct sunlight.

•Do not place or install this device in an area where

it can be exposed to excessive amounts of dust,

humidity, oil, smoke, or combustible vapors.

•Clean using a soft, dry cloth only. Do not use

chemical cleaners, solvents, or detergents. For

stubborn deposits, moisten the cloth with warm

water.

•This device has no user serviceable parts. Do not

attempt to open, service, or modify this device.

INTRODUCTION

Besides providing the hardware inputs for your

microphones or instruments, audio interfaces are critical for

improving the sound of your recordings. Not only will you

achieve better sound, you'll also be able to record multiple

tracks at once, allowing for collaboration with others or true

stereo recordings. The Stage Right™ STi12 USB Audio

Recording Interface does all of the above and then some.

Studio quality recording has never been as accessible.

FEATURES

•44.1kHz, 48kHz, 88.2kHz, and 96kHz sampling rates

with 24-bit audio bit depth

•Dedicated microphone input, instrument input, line

input, and two sets of stereo outputs

•Built-in Analog-to-Digital Converter (ADC) with

101dB dynamic range

•Built-in Digital-to-Analog Converter (DAC) with

105dB dynamic range

•True plug-n-play device, no drivers required

•Compatible with PCs running Microsoft® Windows®

or Apple® Mac® OS X®

•Compatible with all popular Digital Audio

Workstation software

•Includes Kensington Security Slot™(lock not

included)

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated

to ensuring that your ordering, purchasing, and delivery

experience is second to none. If you have any problem with

your order, please give us an opportunity to make it right.

You can contact a Monoprice Customer Service

representative through the Live Chat link on our website

www.monoprice.com or via email at

support@monoprice.com. Check the website for support

times and links.

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure

you have all the items listed below. If anything is missing or

damaged, please contact Monoprice Customer Service for a

replacement.

1x USB Audio Recording Interface

1x USB Cable (Type-A to Type-B)

1x User's Manual

PRODUCT OVERVIEW

Front Panel

1. MIC GAIN1: Controls the input volume of MIC 1

INPUT. The LED around the base of the knob

illuminates when the signal is being clipped.

2. GAIN2: Controls the input volume of INPUT2. The

LED around the base of the knob illuminates when

the signal is being clipped.

3. LED: The LED illuminates when power is applied via

the USB connection.

4. MIC 1 INPUT: Combination 1/4" TRS/XLR jack for

connecting a condenser or dynamic microphone.

5. +48V: Switches +48V phantom power on or off.

Phantom power is on when the button is

depressed.

6. INPUT2: 1/4" TRS instrument/line input for

connecting an instrument level or line level device.

7. LINE/INST: Switches INPUT2 to accept a line level

or instrument level input.

8. DIRECT MONITOR: Switches direct monitoring on or

off. When direct monitoring is on, you can hear the

instrument and microphone inputs in your

headphones.

9. HEADPHONES: 1/4" TRS jack for connecting

headphones.

10. MONITOR: Master control for adjusting the input

and output monitoring levels.

Rear Panel

11. K-SLOT: Kensington Security Slot™ for use with a

security lock to prevent theft. Lock not included.

12. USB: USB connector for connecting the device to

your computer using the included USB cable. The

device receives all the power it needs from the USB

connection. No drivers are required.

13. PHONE: 3.5mm TRS connector for connecting a

phone, mp3 player, or other audio device using the

included 3.5mm TRRS audio cable.

14. LINE OUTPUTS: Two balanced 1/4" TRS jacks for

connecting powered speakers or an amplifier.

INSTALLATION

Perform the following steps to connect the USB Audio

Recording Interface with your computer. To download the

latest drivers, firmware, manuals, etc., go to

www.monoprice.com and type the P/N into the search bar.

If available, support files are linked at the bottom of the

product page.

1. Place the device on a flat surface near your

computer.

2. Rotate the MIC GAIN1, GAIN2, and MONITOR knobs

fully counterclockwise to the minimum position.

3. Place the +48V switch in the off position (out).

4. Ensure that your computer is powered on.

5. Plug one end of the included USB cable into the

USB port on the device, then plug the other end

into an available USB port on your computer. Your

computer will automatically install the necessary

USB drivers and the LED on the front panel will

illuminate. No external drivers are required.

6. Open your computer's audio interface and ensure

that STi12 USB is selected as the audio input and

output device.

Congratulations, your USB Audio Recording Interface is

installed and ready for use!

OPERATION GUIDELINES

•To prevent transient spikes from damaging your

equipment, always turn the two MIC GAIN1, GAIN2,

and MONITOR knobs fully counterclockwise to the

minimum position before making or breaking any

connections.

•Even if using a condenser microphone that requires

+48V phantom power, ensure that the +48V switch

is in the off position (out) before plugging a

microphone into the MIC 1 INPUT jack. Turn on

+48V phantom power only when a condenser

microphone is connected.

•The PHONE jack on the rear panel allows you to

play music from a mobile device, so you can play or

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Monoprice Aufnahmegeräte Handbücher

Monoprice

Monoprice SS-4 Bedienungsanleitung

Monoprice

Monoprice SSVC-4.1 Bedienungsanleitung

Monoprice

Monoprice 612120 Bedienungsanleitung

Monoprice

Monoprice MP-SS4 Bedienungsanleitung

Monoprice

Monoprice SS-6 Bedienungsanleitung

Monoprice

Monoprice 604830 Bedienungsanleitung

Monoprice

Monoprice SS2V70 Bedienungsanleitung

Monoprice

Monoprice DARK MATTER 44708 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch