Monsoon Multimedia Vulkano Bedienungsanleitung
© 2010 Monsoon Multimedia, Inc. All Rights Reserved.
MONSOON MULTIMEDIA
User Guide
User Guide
1
Contents
INTRODUCTION ................................................................................................................................................ 2
HOOK UP THE CABLES ...................................................................................................................................... 4
CONFIGURE YOUR VULKANO ............................................................................................................................. 7
USING YOUR VULKANO FEATURES ................................................................................................................... 15
LIVE TV.......................................................................................................................................................... 15
GUIDE ........................................................................................................................................................... 16
MY RECORDINGS............................................................................................................................................. 19
INTERNET APPS ............................................................................................................................................... 21
SETTINGS ....................................................................................................................................................... 22
SETUP ........................................................................................................................................................... 23
ADVANCED SETUP .......................................................................................................................................... 23
FREQUENTLY ASKED QUESTIONS...................................................................................................................... 26
User Guide
2
INTRODUCTION
Vulkano is a sleek and stylish consumer device that connects to your television STB (Set Top
Box), and enables a complete television and Internet media experience on your Smartphone,
iPhone, iPad, PC, Mac and big screen television. Vulkano allows you to enjoy live and recorded
television, videos, photos and music on multiple devices.
WHAT’S IN THE BOX
Vulkano unit
HDD
(Select models only)
10/100/1000 Ethernet cable Power adapter
SD card
(Select models only) 2 Composite cables HDMI cable
Remote control 2 Component cables IR blaster cable
User Guide
3
REMOTE CONTROL
21 3
54 6
87 9
0
Back MENU
<<
PWR
MUTE
OK
APPS
VOL+ CH+
DVRVOL- CH-
GUIDEMEDIA TV
NEXT
PREV STOP
>/|| >>
Mute
Exit / Previous screen
Start/Stop
Cancel
My Recordings
Channel guide
Number keys
Power
Main Menu
Refresh
Show Information
Live TV
Stop video
Internet applications
Previous
Next
Rewind
Play/Pause Fast Forward
VULKANO UNIT
IR Blaster
Power
HDMI Output
Component Input SD
Video In / Audio In
Composite Input SD
Video In / Audio In
Component Output
HD Video Out
Composite Output SD
Video Out / Audio Out
Ethernet HDD Data
HD Power Reset
SD Card
Aux USB
User Guide
4
HOOK UP THE CABLES
CONNECT YOUR SET TOP BOX (STB) TO VULKANO
When connecting Vulkano to your STB (Satellite or Cable), you can either connect using
Component or Composite video outputs located on the back of the STB. If your STB has both,
use Component for better video quality. Connect the STB video and audio outputs to the video
and audio inputs on the back of the Vulkano. Connect your Vulkano to your STB as shown in the
Component or Composite diagram.
CONNECT VULKANO TO YOUR TV
Connect either the Component or HDMI output cables from the back of the Vulkano to the
video inputs on your TV. If you use Component cables, you will also need to connect the
Composite audio (white and red) cable from the Vulkano output to the TV audio input. If your
TV supports both Component and HDMI input, use HDMI for better video quality. Connect your
Vulkano to your TV as shown in the HDMI or Component diagram.
User Guide
5
STORAGE OPTIONS
Your Vulkano comes with either an SD memory card or an external hard disk drive, depending
on the model.
SD Card –Insert the SD card into your Vulkano as shown, if it is not pre-installed.
Hard Disk Drive –Connect your Vulkano to the supplied Hard Disk as shown.
POWER
Connect the included power supply as shown.
User Guide
6
HOME NETWORK CONNECTIONS
Vulkano can work on your home network, whether it is WiFi or Ethernet.
If Using WiFi –You do not have to do anything, we’ll take care of it for you
If Using Ethernet –Connect your Vulkano to your router as shown
SOFTWARE SETUP OPTIONS
Turn on your television
Use your television remote control to select the HDMI or Component input from the
television setup or settings menu. This connection should be consistent with the cable
connection from Vulkano to the television input (ie: HDMI or Component to your
television)
Plug the Vulkano power adapter into a wall plug
Wait for the green light to appear on the Vulkano, and then for an image to appear on
your television screen (this can take 45 seconds)
Using the Vulkano remote control, follow the on-screen instructions
If you encounter a problem using the TV Setup or choose to use a PC to setup your
Vulkano, please go to http://www.myvulkano.com/support_downloads.html to
download the PC Player/Setup Wizard.
User Guide
7
CONFIGURE YOUR VULKANO
After switching on your Vulkano, the Get Started screen will be displayed on your television.
If you have connected your Vulkano to your TV with
the HDMI input:
Press “1” on your Vulkano remote
Note: Make sure you do not press OK.
If you have connected your Vulkano to your TV with
the Component input:
Press OK on your Vulkano remote
Note: Make sure you do not press “1”.
ETHERNET (WIRED)HOME NETWORKS
If you connected your Vulkano to your router using
Ethernet, the Network Configuration screen will be
displayed.
Press OK
OK
| | |
| | |
| | |
| |
Numbers
OK
User Guide
8
WIRELESS NETWORK NAME
Using the Arrow buttons on your Vulkano remote:
1. Select your wireless network
2. Press OK
Use the Arrow and OK buttons on your Vulkano
remote to select characters from the on-screen
keyboard:
1. Enter your Network Password or Router Key
2. Select Done
3. Press OK
DELETE ARROW ICONS
A Network Configuration confirmation screen will be
displayed.
Press OK
VULKANO NAME
You will need to give your Vulkano a name and password. This name and password will allow
you access to your Vulkano from your PC or mobile device.
Use the Arrow and OK buttons on your Vulkano
remote to select characters from the on-screen
keyboard:
1. Enter your own Vulkano name
2. Select Done
3. Press OK
User Guide
9
VULKANO PASSWORD
Use the Arrow and OK buttons on your Vulkano
remote to select characters from the on-screen
keyboard:
1. Enter your password
2. Select Done
3. Press OK
Note: The Vulkano name and password are case
sensitive. If you enter a name that has already been assigned to someone else, you will be asked
to choose another name.
CONFIGURE VIDEO INPUT
Using the Arrow buttons on your Vulkano remote:
1. Select the appropriate video input
configuration that corresponds to how you
connected Vulkano to your STB:
oComposite –if you used Red/White/Yellow
cables
oComponent –if you used Red/Green/Blue & Red/White cables
2. Press OK
The video will appear in the lower-left part of your TV
screen when you have selected the right input.
CONFIGURE EPG (ELECTRONIC PROGRAM GUIDE)
Using the Number buttons on your Vulkano remote:
1. Enter your zip code
2. Press OK
Note: You can use the Left Arrow button on your Vulkano remote to
backspace if you make a mistake.
OK
| | |
| | |
| | |
| |
Numbers
OK
Inhaltsverzeichnis
