montpellier MS310-2 Bedienungsanleitung
Tall Combi Fridge Freezer
MS310-2 - White & Silver
MS317-2W - White
Please read these instructions carefully before attempting to install or use this appliance.
We recommend that you keep these instructions in a safe place for future reference.
Installation and Operating Instructions
THE PERFECT BALANCE OF FUNCTION AND STYLE
LAUNDRY - DISHWASHING - COOKING - COOLING
GUIDELINES CONCERNING THE SAFETY OF USE 1
GENERAL INFORMATION 3
DESCRIPTION OF THE APPLIANCE, BASIC PARTS 4
INSTALLATION AND OPERATING CONDITIONS OF
THE APPLIANCE 6
ELECTRONIC CONTROL PANEL DESCRIPTION.
TEMPERATURE REGULATION 8
USING THE REFRIGERATOR-FREEZER EFFICIENTLY 10
DEFROSTING 12
CLEANING AND CARE 13
CHANGING THE DIRECTION OF THE DOOR OPENING 13
TROUBLE-SHOOTING 15
TRANSPORT 16
ENVIRONMENTAL PROTECTION 16
PRODUCT FICHE 17
1
GUIDELINES CONCERNING THE SAFETY OF USE
Some provisions in this user manual are unified for refrigerating
products of different types (for a refrigerator, refrigerator-freezer or
freezer). CAREFULLY READ THE INSTRUCTION MANUAL. The
Manufacturer shall not be held liable for damage arising from the failure
to observe the instructions contained in this manual. Keep this manual
for future reference, or to pass it over to the next user.
–Do not cover the ventilation holes at the top and on the sides of the
appliance.
–Do not use any mechanical means or electrical devices to hasten the
thawing process when cleaning the freezer compartment.
–Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
–If the supply cord is damaged it must be replaced by the
manufacturer, manufacturer service agent or a similarly qualified
person, in order to avoid a hazard.
–Disposal of the appliance should be according to national rules.
–Do not damage the appliance refrigeration system. It contains the
refrigerant gas R600a. If the refrigeration system is damaged:
•Do not use any open flame.
•Avoid sparks―do not turn on any electrical appliances or
lighting fixtures.
•Immediately ventilate the room.
–Air the room in which the appliance is placed for a few minutes (the
size of the room for a product containing isobuthane / R600a must
be at least 4 m3) to avoid damage to the cooling system.
–Do not allow children to play with the appliance or to plug it in or
unplug from the electricity supply socket. Do not allow children to
play with the packaging material from the appliance.
–This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
–Cleaning and user maintenance shall not be made by children
without supervision.
2
The appliance should only be connected to an earthed socket
installed in accordance with the regulations. Make sure that
the supply voltage corresponds with the voltage marked on
the rating label. This product complies with all binding CE
labelling directives. The earthed electrical socket by which the
appliance is connected to the mains should be in an accessible
place. It is a legal requirement that the appliance is properly
earthed. The manufacturer will not be held liable for any damage or
injury which may result from the failure to fulfil this requirement.
–TO AVOID THE EXPOSURE TO DANGER, ALWAYS HAVE FAULTY
CABLE BE REPLACED ONLY BY THE MANUFACTURER, BY OUR
CUSTOMER SERVICE OR BY QUALIFIED PERSON AND WITH A CABLE
OF THE SAME TYPE.
–It is forbidden to readjust or modify any parts of the unit. It is crucial
not to damage the capillary tube visible in the compressor recess. The
tube may not be bent, straightened or wound. If the capillary tube is
damaged by the user the guarantee will be void.
–It is forbidden to use a technically damaged appliance.
–The appliance can’t be disposed of by burning.
–Do not store beverages in bottles and cans, especially carbonated
beverages, in the freezer chamber. The cans and the bottles may
explode.
–Do not put frozen products, taken out directly from the freezer
(lollies, ice cubes, etc.) into your mouth; their low temperature may
cause severe frost-bite.
–The appliance should be used only for freezing and storing foodstuffs.
–This appliance is not designed for the storage of explosive substances
such as aerosol cans with a flammable propellant.
–It is prohibited to store petrol and other flammable liquids near the
appliance.
–The appliance operates properly at the ambient temperature (see
product fiche). Do not use it in the cellar, unheated summer cottage
during autumn and winter.
–Pull the plug out from the mains socket before each maintenance
activity. Do not pull on the cord, but hold the body of the plug instead.
–When performing activities, such as cleaning, maintenance or
moving, the appliance must be completely disconnected from power
supply (by pulling the plug out from the socket)
–If the appliance is unplugged (for cleaning, moving to another place,
etc.), it may be repeatedly switched ON AFTER 15 MIN.
3
–Do not place any switched on electrical devices (such as microwave ovens,
hair dryers, irons, electric kettles or other electrical devices) on top of
the appliance because this may cause ignition of plastic parts.
–Do not place any dishes with liquids on top of the appliance and do not keep
flowers in vases or other liquid-filled vessels on the appliance.
–Do not climb on or sit on the appliance, do not lean on or hang on the
appliance doors and do not allow children to do this.
DO NOT TRY REPAIR THE APPLIANCE ON YOUR OWN. ALWAYS
CONTACT AN AUTHORIZED TECHNICIAN. TO AVOID THE
EXPOSURE TO DANGER, ALWAYS HAVE FAULTY CABLE BE
REPLACED ONLY BY THE MANUFACTURER, BY OUR CUSTOMER
SERVICE OR BY QUALIFIED PERSON WHIT A CABLE OF SAME
TYPE.
ATTENTION! DO NOT REMOVE THE COVER OF THE LIGHT EMITTING
DIODE (LED) LUMINAIRE! If the cooling appliance is equipped with light
emitting diode (LED) luminaire and the lighting is not functioning, please contact
a maintenance technician to have it replaced. THE LUMINAIRE CAN BE
REPLACED ONLY BY A MAINTENANCE TECHNICIAN!
GENERAL INFORMATION
Model MS317-2W
The appliance is a two–compartment refrigerator-freezer combination. The
freezer compartment is equipped with a frost-free refrigeration system
(“No Frost”). The refrigerator compartment is designed for the brief storage
of fresh food. The freezer compartment is designed for the freezing and long-
term storage of food products.
In the refrigerator compartment is the cold section. A temperature of -2 °C to
+3 °C is maintained in the cold section which is suitable for short-term storage
of meat, fish and similar products.
Model MS310-2W
The appliance is a two–compartment refrigerator-freezer combination. The
refrigerator compartment is designed for the brief storage of fresh food. The
freezer compartment is designed for the freezing and long-term storage of
food products.
THE MANUFACTURER GUARANTEES RELIABLE OPERATION OF THE
REFRIGERATOR WHEN THE RELATIVE AIR HUMIDITY NOT GREATER THAN
70 PER CENT AND THE AMBIENT TEMPERATURE IS:
+16 TO +32 DEGREES CELSIUS (Climate class N);
+16 TO +38 DEGREES CELSIUS (Climate class ST).
+16 TO +43 DEGREES CELSIUS (Climate class T).
4
DESCRIPTION OF THE APPLIANCE, BASIC PARTS
Model MS317-2W
A – Refrigerator compartment
B – Freezer compartment
The transparent cold section
drawer 5 moves on roller bearings
16. The drawer can be removed by
pulling it out, and lifting it off the
rails.
1 Control panel
2 On / off switch for interior light
3 Adjustable height shelves
4 Shelf for bottles
5 Cold section drawer (from -2°C to +3 °C)
6 Glass shelf
7 Fruit and vegetable boxes (2 pcs.)
8 Frozen products section(s)
9 Fast-freeze section
10 Egg tray
11 Adjustable height door trays
12 Condenser
13 Thaw water drip tray
14 Compressor
5
Model MS310-2W
A – Refrigerator compartment
B – Freezer compartment
1 Thermostat knob 9 Frozen products section(s)
2 On / off switch for interior light 10 Thaw water channel chamfer
3 Adjustable height shelves 11 Adjustable height door trays
4 Shelf for bottles 12 Egg tray
5 Glass shelf 13 Condenser
6 Fruit and vegetable boxes (2 pds.) 14 Thaw water drip tray
7 Section for small food products 15 Compressor
8 Fast-freeze section
6
INSTALLATION AND OPERATING CONDITIONS OF
THE APPLIANCE
Installation before using the appliance for the first time
It is recommended to prepare the appliance for operation with a helper.
•Remove package. Lift the appliance away from foamed polystyrene base. Tear off
adhesive tapes.
•When positioning the appliance in chosen location, it will move more easily into
position if you lift the front a little and incline it backward, allowing it to roll on its
casters. Moving or positioning the appliance do not tilt it by more than 40° from the
vertical position.
When placing, moving, lifting the appliance, do not hold the door handles,
do not pull the condenser at the rear part of the refrigerator and do not touch
the compressor unit.
•Remove all red-coloured parts from the
shelves. Tear away the adhesive tapes from
the door trays – they are intended only for
the transport of the appliance.
NOTE. When you open the freezer
compartment door a little red packing detail will fall out – IT IS FOR
TRANSPORTATION PURPOSES ONLY.
• Take two supports 1 from the bag and insert
them into the guides 2 at the top back part of the
appliance (see picture).
•If the appliance is brought in from the cold
(temperature is not higher than +12 °C), you
should wait for two hours before connecting it to the mains.
The appliance should not be connected to the mains until all packing and
transport materials aren’t removed. Suitably dispose the packaging material.
Connection to the mains
•This appliance should be connected to AC 220-240V 50Hz supply socket. The
socket must be fitted properly, and must be supplied with an earthling conduit and
a 10A fuse. It is a legal requirement that the appliance is properly earthed.
The manufacturer will not be held liable for any damage or injury which may result
from the failure to fulfil this requirement.
•Do not use adapters, multiple sockets and two-wire extension leads. If it is necessary
to use the extension lead, it must be equipped with a protection ring and a single
socket and must have a VDE/GS safety certificate.
•If an extension lead is used (with a protection ring and safety certificate), its socket
must be located at a safe distance, away from the sinks, and must not be in a place
where it could be flooded by water or waste water.
•When positioning the appliance, be careful that the electrical cord isn’t squeezed in
order to avoid its damage. Do not store heavy objects such as cooling devices,
furniture or other domestic devices next the appliance in such a way that they could
squeeze and damage the electrical cord. This can cause a short circuit and a fire.
7
•Make sure that the plug of the electrical cord is not squeezed by the back wall of the
appliance or otherwise damaged. A damaged plug can be the cause of a fire!
Positioning
•Place the appliance in a dry, well ventilated room.
WARNING! The appliance should not be operated in an unheated room or
porch. Place the appliance away from heat sources such as kitchen stove/
oven, radiators, or direct sunlight.
The rear wall of the refrigerator, in particular, the condenser and other elements of the
cooling system must not contact other elements, which may damage them, (e.g. central
heating pipes and the water supply pipes).
WARNING! The appliance must not touch any pipes for heating, gas or water
supply, or any other electrical devices.
Minimum distances from the heat sources:
-from the electric gas and other ovens - 30 mm,
-from oil or coal fired ovens - 300 mm,
-from built-in ovens - 50 mm
If there is no possibility of ensuring the above- mentioned distances, provide an
appropriate insulation board.
•Do not cover the ventilation holes at the top of the appliances – it
must be a good air circulation around the appliance. There
should be a gap of at least 10 cm between the top of the
appliance body and any furniture that may be above it (see fig.). If
this requirement is not followed, the appliance consumes more
electrical energy and its compressor may overheat.
•The appliance must stand on a level surface and must not touch
the wall. If necessary, regulate the height of the appliance by
adjusting the levelling feet: by turning them clockwise – the front
of the appliance rises, by turning them counter clockwise – it
comes down. If the appliance is tilted slightly backward – the
doors will close by
themselves.
•◄ If the appliance is placed in a corner, a gap
must be left between the appliance body and
the wall so that the freezer compartment door
can be opened enough to pull out the frozen
product drawer (see picture).
8
ELECTRONIC CONTROL PANEL DESCRIPTION.
TEMPERATURE REGULATION.
Model MS317-2W (fig. 1)
When connecting the device to the mains for the first time, the blue temperature indicating
segment lights up at +5 (factory temperature setting +5 °C, but you can select the preferred
temperature according to your needs).
1. Temperature adjustment button is marked with the °C symbol.
Temperature setting in the refrigerator compartment
Activate temperature button 1: tap and keep until the temperature indicating segment starts to
flash in blue (active). Then release button 1 and tap repeatedly until the required temperature
segment is blue (activated). One tap changes the temperature by one position.
The temperature setting operates in a circle: for example, the active segment is at +5, and if you
want to set +9 °C after activation you have to tap temperature button 1 2 times – until the
temperature indicating segment at +9 turns blue.
Refrigerator compartment temperature is adjustable on a nine-point scale:
+9 – highest temperature (lowest cooling).
+1 – lowest temperature (highest cooling).
NOTE. After power loss the device turns on automatically, saving the last user-set temperature in
the refrigerator compartment.
THE TEMPERATURE IN THE REFRIGERATOR COMPARTMENT MAY VARY
DEPENDING ON AMBIENT TEMPERATURE, THE AMOUNT OF FOODSTUFFS, THE
TEMPERATURE OF THE FOODSTUFFS, AND HOW OFTEN THE APPLIANCE
DOORS ARE OPENED AND CLOSED. Therefore we recommend:
•locate the appliance away from heat sources,
•do not put hot foodstuffs in the refrigerator compartment – they must be cooled down to room
temperature,
•appliance door must not to be left open,
•the appliance door should not be open longer than it is necessary to take out or put in foodstuffs
IF THE REFRIGERATOR COMPARTMENT DOOR IS OPEN MORE THAN 30 SECONDS an audible
warning signal sounds, and silencing when the door is closed.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere montpellier Kühlschrank Handbücher
montpellier
montpellier MFF170K Bedienungsanleitung
montpellier
montpellier MLA54BK Bedienungsanleitung
montpellier
montpellier MITL85 Bedienungsanleitung
montpellier
montpellier MNF1860X Bedienungsanleitung
montpellier
montpellier MON-MRF48W Installationsanleitung
montpellier
montpellier MS166W Bedienungsanleitung
montpellier
montpellier MFF152 Bedienungsanleitung
montpellier
montpellier MICL122 Bedienungsanleitung
montpellier
montpellier MBUR115E Bedienungsanleitung
montpellier
montpellier MITL325 Bedienungsanleitung
montpellier
montpellier MS310-2W Bedienungsanleitung
montpellier
montpellier MRF54W/BK Bedienungsanleitung
montpellier
montpellier M605W Bedienungsanleitung
montpellier
montpellier MFF186ALX Bedienungsanleitung
montpellier
montpellier MAB50 Bedienungsanleitung
montpellier
montpellier MITL294 Bedienungsanleitung
montpellier
montpellier MAB550C Bedienungsanleitung
montpellier
montpellier MIFF700 Handbuch
montpellier
montpellier MAB2055C Bedienungsanleitung
montpellier
montpellier MAB2030 Bedienungsanleitung
Beliebte Kühlschrank Handbücher anderer Marken
Bonnet Neve
Bonnet Neve SKYVIEW PLUS Bedienungsanleitung
Zanussi Electrolux
Zanussi Electrolux ZERB 8441 Bedienungsanleitung
Sharp
Sharp SJ-BA31IEXW2-EU Bedienungsanleitung
CORBERO
CORBERO CC2300MCW Bedienungsanleitung
KitchenAid
KitchenAid 2205264 Bedienungsanleitung
Stengel
Stengel KU 1101 A++ Bedienungsanleitung
