Morphy Richards IB22071 Bedienungsanleitung

HIGH-PERFORMANCE CORDLESS THERMOCERAMIC STRAIGHTENER WITH

TOURMALINE PROTECTION AND DIGITAL CONTROL

THERMOCERAMIC & TOURMALINE

CORDLESS STRAIGHTENER

Your new cordless straightener has been designed by electrical experts

Morphy Richards and twice international hairdresser of the year Mark Hill.

Use this style guide to help you get the most from your styling tool.

HOW DOES TOURMALINE

TECHNOLOGY WORK?

Morphy Richards Mark Hill styling tools combine powerful ThermoCeramic heating technology

with the added protection and performance of Tourmaline. This semi-precious gemstone has

unique infrared and ionic properties. Negative ions are emitted close to the hair cuticles to create

an ultra-sleek surface and to capture essential moisture, preventing over-drying and damage.

The results? Super-enhanced shine, amazing colour and unrivalled protection.

STEP 1: DRYING YOUR HAIR

1 After you have shampooed and conditioned your hair,

comb through gently using a wide toothcomb.

Hair stretches when wet, up to 1/3of its length, and

by being too rough at this stage, you could damage

your hair

1 Before you apply a heat protection spray, use your

hairdryer to ‘waft’ the excess moisture from your hair.

If you apply a styling product on very wet hair, you may

dilute the product, making it less effective. Apply the

heat protection spray evenly from the roots of your hair

to the ends

1 Using sectioning clips take a small section of hair from

the nape of the neck, and secure the rest of your hair

away from it. Using a paddle brush, dry the hair,

pointing the hairdryer down the hair from roots to ends

to help avoid any ‘frizzy’ bits

1 Once this section is dry, use the cool button for a

couple of seconds to ‘set’ the hair

1 Take the next section of hair, dry and cool. Do this for

the rest of your hair. This may take a little longer then

you are used to at first, but the results you achieve will

be worth it, and your style will last longer

STEP 2: STRAIGHTENING YOUR HAIR

1 On thoroughly dry hair, section hair from the nape of the

neck no deeper than 2cm and secure the rest of the hair

away with clips

1 Using the + and – buttons select the right temperature

for your hair. For instructions on how to find the right

temperature reference the instruction section within this

book. Note that most hair types will not require the

maximum temperature of 200˚C

1 Clamp the roots of the section between the

straightening plates

1 Gently and swiftly run the straighteners down the hair for

5 seconds

1 Take the next section and repeat until desired effect

is achieved

1 Finish by running a wide toothcomb through the hair

STYLE VARIATIONS

To retain plenty of body and bounce

Straighten only the top sections of the hair around the

crown areas to give a smooth yet voluminous finish.

To create softness and shape around the face

While gliding the straightener down your hair, as you get

half way down the section, turn your wrist inwards to shape

the hair around your face and frame your features perfectly.

For a choppier texture

Flick-out hair at the very ends by turning wrists outwards as

you get about two thirds of the way down your section.

USING YOUR STRAIGHTENER:

1. After washing your hair, it’s really important to prepare it for styling. If you use lots of heated

styling tools on your hair use a heat protection spray before you begin styling. Always dry the

excess water from your hair using a towel, and then use a wide toothcomb to detangle and

smooth your hair.

2. Use your hairdryer until your hair is completely dry.

3. Divide your hair into sections, and comb each section through.

4. Use sectioning clips to clip hair out of the way so you can straighten hair thoroughly.

5. Plug in your hair straightener base at the mains. There is space for cable storage in the

straightener base, so you may need to unwind the cable to reach your mains socket.

6. Press and hold the On/Off button and the digital display will illuminate to show the product is

switched on and is heating up. The temperature will be displayed on the screen (the unit will

switch on at 120 degrees). To alter the temperature use the +/- buttons until you find the best

setting for your hair type. The minimum setting is 120 degrees which is ideal for fine hair, the

maximum temperature is 200 degrees which is better for thicker or coarser hair.

You should experiment to find the lowest setting your hair needs to help minimise damage.

7. When ready for use, the word ‘ready’ will appear on the screen and begin to flash. Lift your

straightener from the base (the word ready will disappear to indicate the straightener has

been removed from the base). Clamp a section of the hair between the straightening plates,

as close to the roots as possible. Gently slide the straightener down your hair shaft to the

ends. For more difficult sections of hair, you may need to do this again. Repeat on all sections

of the hair.

8. To ensure optimum performance, you will need to replace the straightener back in the base

approximately every 4 minutes. It’s really easy to do this while you section the next piece of

hair to straighten. Leave the straightener in the base for a few seconds and full temperature

will be regained. ‘Ready’ will begin to flash on the digital display to indicate the straightener

has reached full temperature and is ready to use again.

9. Don’t forget to switch off your straighteners at the base unit by pressing and holding the

on/off button.

10. Never wind the mains cable around the straightener – use the cable storage available in the

base unit.

WIRING

The product is fitted with a 13A (BS1363) plug. A 13A fuse (BS1362) must be used. Check the

voltage on the rating plate of your appliance corresponds with your house electricity supply which

must be AC (Alternating Current). If the socket outlets in your home are not suitable for the plug

supplied with this appliance the plug should be removed and an appropriate one fitted.

IMPORTANT: THE PLUG, REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE

DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED

INTO A LIVE SOCKET OUTLET.

CLEANING YOUR STRAIGHTENER

Over time, you will find a natural build up on your straightening plates. This can be caused by

natural oils in your hair and styling products and lotions. At the first sign of build up, you should

clean your straightening plates. To do this, always switch your straightener off and wait for them

to cool down. Wipe with a damp cloth, or a non abrasive cleaning wipe. Failure to do this may

mean the build up becomes burnt onto the straightening plates and they will become difficult to

clean. If your straightening plates do become discoloured it will NOT affect their performance.

MAINS LEAD

As a safety precaution, and to prolong the life of your appliance, do not wrap the mains lead

around the straightener unit. Use the cable storage provided in the base unit.

SAFETY INFORMATION

When using your hair straightener, basic safety precautions should always be followed.

Please read these instructions carefully before using the product, and keep them in a

safe place for future reference.

1. This straightener is of professional standard, and reaches very high temperatures. Always be

careful not to allow the plates to come into contact with the skin.

2. Do not leave the plates in contact with the hair for more than a few seconds. The straightener

reaches very high temperatures, so there is no need to leave the hair between the plates for

longer than a few seconds. This will avoid unnecessary damage to the hair cuticle.

3. Use the appliance for its intended use only.

4. To protect against the risk of electric shock, do not immerse the appliance in water or any

other liquids.

5. The appliance is not intended for use by children or other persons without assistance or

supervision if their physical, sensory or mental capabilities prevent them from using it safely.

Children should be supervised to ensure that they do not play with the appliance.

6. Always unplug your appliance when it is not in use.

7. Do not leave the straightener switched on while unattended.

8. Do not use this appliance near bathtubs, showers, basins or other vessels

containing water.

9. In the event of cable damage, do not attempt to replace the mains cable, return to

Morphy Richards.

10. After use, do not store until the product has cooled down.

11. Do not place the straightener on surfaces likely to be damaged by the heat.

12. Ensure your hair is completely dry before you begin straightening. Applying high

temperatures to damp or wet hair will increase the probability of hair breaking or becoming

permanently damaged.

13. Try and use your straightener for as short a time as possible – prolonged use can cause

unnecessary damage to your hair.

14. The appliance should be used with the stand provided.

PRODUCT FEATURES: 1

1. Cordless

2. Tourmaline straightener

3. ThermoCeramic element

4. Digital control

5. Charging dock/stand

6. Stylish tin

7. 38mm plates

8. On/off switch

9. Rubber plate guards

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Morphy Richards Styling-Eisen Handbücher

Morphy Richards

Morphy Richards IB22037 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22075 Produktinformationsblatt

Morphy Richards

Morphy Richards IB22069 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22078 Bedienungsanleitung

Morphy Richards

Morphy Richards Essentials 22037 Bedienungsanleitung

Morphy Richards

Morphy Richards IBRB4015 Benutzerhandbuch

Morphy Richards

Morphy Richards IB22070 Produktinformationsblatt

Morphy Richards

Morphy Richards IB22018 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22011 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22016 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22052 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22089 Produktinformationsblatt

Morphy Richards

Morphy Richards IB22015 Bedienungsanleitung

Morphy Richards

Morphy Richards IBRB4008 Benutzerhandbuch

Morphy Richards

Morphy Richards IB22027 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22060 Bedienungsanleitung

Morphy Richards

Morphy Richards IBRB4005 Benutzerhandbuch

Morphy Richards

Morphy Richards IB22047 Produktinformationsblatt

Morphy Richards

Morphy Richards IB22002 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22022 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22028 Bedienungsanleitung

Morphy Richards

Morphy Richards SG21024 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22004 Bedienungsanleitung

Morphy Richards

Morphy Richards SG22077 Bedienungsanleitung

Beliebte Styling-Eisen Handbücher anderer Marken

Vitek

Vitek VT-2505 Bedienungsanleitung

TZS First AUSTRIA

TZS First AUSTRIA Ida FA-5670-3 Bedienungsanleitung

izzy

izzy LN-112 Bedienungsanleitung

Vitek

Vitek VT-2310 Bedienungsanleitung

Okoia

Okoia HS23 Bedienungsanleitung

Arzum

Arzum TRENDCARE AR 5042 Bedienungsanleitung

SOLAC

SOLAC PP7251 Bedienungsanleitung

VS Sassoon

VS Sassoon VSLE330A Bedienungsanleitung

Philips

Philips HP8339 Bedienungsanleitung

Philips

Philips HP4666 Bedienungsanleitung

Vitek

Vitek VT-8291 Bedienungsanleitung

VS Sassoon

VS Sassoon miniPRO Wave Envy Bedienungsanleitung

Arzum

Arzum SUPERSTAR TOUCH Bedienungsanleitung

Remington

Remington S2880ZBA Bedienungsanleitung

cecotec

cecotec Bamba RitualCare 900 Wet&Dry Max Bedienungsanleitung

Philips

Philips HPS950 Bedienungsanleitung

Andis

Andis Gold CSI-1E Bedienungsanleitung

Jata

Jata Marco Aldany JBPP5570 Bedienungsanleitung