BARTELL MORRISON INC. BARTELL MORRISON (USA) LLC
375 ANNAGEM BLVD, MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201
200 COMMERCE DRIVE, FREEHOLD, NEW JERSEY, USA, 07728, 732-566-5400 FAX 732-566-5444
Created: 07/04
Revised: 06/14
NEVER leave the power sprayer unattended while running.
Children and small animals should NEVER be present in the work area during
operation of the power sprayer.
ALWAYS check your power sprayer for loose or missing nuts
and bolts before starting. Tighten any loose fasteners and replace
missing or broken parts.
Perform all routine maintenance as described within this manual. Failure to do
so will void your warranty and will eventually result in premature equipment
failure.
NEVER perform maintenance on a running piece of equipment. Shut down the
engine and allow it to cool before servicing the power sprayer, including
mechanical work or lubrication.
ALWAYS replace missing, damaged or unclear safety
labels to ensure operator awareness and safety.
NEVER operate the power sprayer with missing or
damaged safety guards. Replace immediately with
appropriate Morrison parts.
NEVER put hands, feet, or other appendages inside the
belt guard while the engine is running, even at idle or
with protective clothing, as serious injury may result.
NEVER wear loose fitting clothing or jewelry around rotating equipment such
as the power sprayer as it may become entangled in the machinery, resulting
in serious injury.
ALWAYS refuel the power sprayer in a well-ventilated area,
away from ignition sources such as sparks, flames, and lit
cigarettes. Smoking while fuelling the equipment may result in
explosion.
Ensure the engine has cooled sufficiently before refueling to
avoid igniting gasoline fumes.
NEVER operate the power sprayer in explosive environments
such as paint fumes, methane, natural gas, fine particulate,
aerosol propellant, or solvent fumes.
NEVER smoke near the power sprayer as stray gasoline fumes
may ignite. Operating the power sprayer around an open flame
may also result in explosion.
ALWAYS shut down the engine and allow it to cool off before lifting or
transporting the power sprayer.
ALWAYS tie down the power sprayer when being transported in a truck or on
a flatbed. Empty the fuel tank if transporting it over long distances.
