Mosentek MS033C Bedienungsanleitung

Highbay 5.8GHz Microwave Motion Sensor

MS033C

PRODUCT.:

MODEL NO.:

SPEC NO.:

R & D DEPARTMENT

APPROVEDCHECKEDWRITED BY

Model: MS033C

Add：Block H 5F; Huamingchen Hi-Tech Industry Park; Genyu Road; Matian Street; Guangming District; Shenzhen PRC. Email: [email protected] Tel: +86 0755 2720 6813

Enabling Technology Serving People

13m detection range for highbay light application.

0-10V dimming output build in with daylight sensor, lux on and lux oﬀ function available.

IP65, 3.5mm audio jack connector dedicated for highbay UFO.

Dedicated socket for fast pluggable installation or remove the sensor.

Remote control setting.

5 years warranty.

Product Features

Technical data

11-15V DC

≤22mA

0-10V

5.8GHz±75MHz

<0.3mW

100%/75%/50%/25%

3s/30s/90s/3min/5min/15min/20min/30min

5Lux/15Lux/50Lux/100Lux/300Lux/Disable

0s/5s/30s/3min/5min/15min/45min/+∞

10%/20%/30%/50%

Max.13m (Ceiling mounted)

Radius 6m (Ceiling mounted 13m)

30°-150°

-35°C~70°C

IP65

Operating voltage

Operating current

Output

Microwave frequency

Microwave power

Sensitivity

Hold time

Daylight threshold

Stand-by period

Stand-by dimming level

Mounting height

Detection range

Detection Angle

Operating temperature

IP rating

Note

Input

Output

Sensor

Parameters

Dimension (Unit: mm) Wiring diagram

- 01

Add：Block H 5F; Huamingchen Hi-Tech Industry Park; Genyu Road; Matian Street; Guangming District; Shenzhen PRC. Email: [email protected] Tel: +86 0755 2720 6813

Enabling Technology Serving People

Model: MS033C

ø49

Max.28.5

15.5

25.5

ø19.5

ø26.8

8.5

ø42.8

ø22.8

4.8

LED Driver

VCC

DIM

GND

Red: VCC

White: DIM

Black: GND

LED+

LED-

17.5

ø19.5

22.5

DIM

VCC

GND

The sensor setting pls refer t o remote controller MR003

25±2.0mm

180±10mm

Red: VCC

White: DIM

Black: GND

8+1mm

Daylight Priority

Note：Lux-Oﬀ sampling time--10s；

Lux-Oﬀ sampling time--10s；

Lux-On function takes eﬀect only when standby dimming

period set at +∞.

Lux oﬀ

light on automatically

Sampling time

light oﬀ automatically

Lux on

Sampling time

With suﬃcient daylight, even

when motion was detected,

light remains OFF.

Light automatically turn on and

dim to the stand-by dimming

level when ambient brightness

is lower than preset lux level.

With insuﬃcient ambient

brightness, light dims to 100%

when motion was detected .

Light keeps on 100% within

the holdtime.

Application

1. Daylight priority：

MS033C was build in with daylight sensor it can tell the

diﬀerence between natural light and artiﬁcial LED light, the

sensor will turn on your light ﬁxtures when the ambient light

is lower than the setting lux value even there is no any

motion was detected. When the ambient light is higher than

the setting lux value, the sensor will switch oﬀ the light

ﬁxtures even there is still motion.

Lux-On function takes eﬀect only when stand-by dimming period set at +∞.

① ③ ④

②

Light turn oﬀ when ambient lux

level is higher than preset lux

amount even there is still

motion.

Light dims to standby dimming

level if no motion was detected

after the holdtime.

⑤⑥

- 02

Add：Block H 5F; Huamingchen Hi-Tech Industry Park; Genyu Road; Matian Street; Guangming District; Shenzhen PRC. Email: [email protected] Tel: +86 0755 2720 6813

25% 50% 75% 100%

Wall Mounted

2m 4m 6m 8m 10m 12m 14m 16m 20m18m

Mounting

height

Ceiling Mounted

16m

18m

10m

Mounting

height

12m

14m

0m 2m 4m 6m 8m 10m2m4m6m8m10m

Detection coverage

Sensitivity :

Enabling Technology Serving People

Model: MS033C

With suﬃcient daylight, even

when motion detected, light

remains OFF.

With insuﬃcient ambient

brightness, light dims to 100%

when motion was detected .

Light keeps on 100% within

the holdtime.

Light dims to standby level if

no motion detected after

holdtime.

After the stand-by period,

light OFF.

The daylight threshold is set to "5Lux/15Lux/50Lux/100Lux/300Lux, stand-by period is set to "5s/30s/3min/5min/15min/45min".

⑤

3. Dimmable control/Corridor function:

①③④

②

With suﬃcient daylight, even

when motion was detected,

light remains OFF.

With insuﬃcient ambient

brightness, light dims to 100%

when motion was detected .

Light keeps on 100% within the

holdtime.

After the last detection and

the preset hold time elapsed,

light OFF.

When motion is detected, the

sensor will switch on the light to

100% brighteness.

After people leave the detection

area, light remains 100%

brightness within hold time.

After the last detection and

the present hold time elapsed,

light OFF.

2.) The daylight threshold is set to "Disable". Light on when detect movement, After people leave, Light oﬀ after Hold time.

1.) The daylight threshold is set to "5Lux/15Lux/50Lux/100Lux/300Lux, Stand-by period is set to "0s".

2. ON/OFF function:

① ② ③

① ② ③ ④

- 04

Add：Block H 5F; Huamingchen Hi-Tech Industry Park; Genyu Road; Matian Street; Guangming District; Shenzhen PRC. Email: [email protected]om Tel: +86 0755 2720 6813

Enabling Technology Serving People

Model: MS033C

Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.

The detected surface cannot be shielded by metal objects.

Microwave sensor can be installed in any lamp except the one with full metal shell.

Should be kept away from the driver to avoid interference generation and lamp ﬂashing.

Shall not be installed next to large operating machines such as ventilator/ceiling fan to avoid false triggering caused by machine vibration.

Suitable for indoor installation to avoid false triggering due to external factors such as rain, wind or tree swing.

Installation precautions

MR003 Programable one key commission remote controller

Front Back Side

MR003

Start Memory Apply Power

100%

Power

80%

25% 50%

Sensitivity

Hold time

Stand-by dimming level

Stand-by period

Daylight threshold Brightness

75%

ON/OFF Auto

Mode Reset

100%

3s 30s 90s 3min

5min 15min 20min 30min

10% 20% 30% 50%

0s 5s 30s 3min

5Lux 15Lux 50Lux ▲

100Lux 300Lux

Disable

▼

5min 15min 45min +∞

MR003

Start

Memory

Apply Power

100%

Power

80%

25% 50%

Sensitivity

Hold time

Stand-by dimming level

Stand-by period

Daylight threshold Brightness

75%

ON/OFF Auto

Mode

Reset

100%

3s 30s 90s 3min

5min 15min 20min 30min

10% 20% 30% 50%

0s 5s 30s 3min

5Lux 15Lux 50Lux ▲

100Lux 300Lux

Disable

▼

5min 15min 45min +∞

Size (L*W*H): 116.5*55*13mm

7 battery is recommended

116.5mm

55mm 13mm

Remote Setting Tips: When press any button, if the light is ﬂickering one time, means the setting

is successful.

The period of light keeping 100% brightness after

moving objects leave the detection area.

Deﬁnition of the ambient brightness; only when the ambient

brightness is lower than the preset speciﬁc lux amount, the sensor

will work; when it's preset as "disable", the sensor will detects motion

regardless the ambient brightness.

The period of light keeping low output before it's completely switched

oﬀ. When it's preset as"+∞“, the light always keep at low output if no

movement in the detection area and doesn't turn oﬀ.

The dimming level in the standby period.

1. Press Start to program mode， then select the ①Sensitivity②

Holdtime③Standby dimming level④Standby period⑤Daylight

threshold to setting

2. Press Memory to save the parameters ①-⑤ had selected in step 1

3. Press Apply to transmit the ①-⑤ parameters to the target sensor

Remark ：After press Start，you need to press any of ①-⑤parameter

button within 30S, the time windown between press any button is

30S , it will quit program mode if no any button is pressed within 30S.

Quick setting the power output in 80% or 100%

Long press this button to set the power from 20% to 100%， available

in permanent ON mode or in sensor mode.

ON/OFF

Turn the sensor in a default setting

(3s hold time, 0s stand-by period, lux disable, 100% sensitivity).

Reset

Power (80%/100%）

Brightness (+/-)

Start

Sensitivity

Memory

Apply

Program Mode

Save Setting

One Key Apply

Auto

Hold time

Stand-by dimming level

Daylight threshold

Stand-by period

In this area, movement will be detected and able to trigger the sensor.

100% detection area is also known as the strongest sensitvity.

Setting the light permanent ON or OFF without motion mode

Key Function

Switch to sensor mode and restore the latest sensor setting

- 05

Add：Block H 5F; Huamingchen Hi-Tech Industry Park; Genyu Road; Matian Street; Guangming District; Shenzhen PRC. Email: [email protected]om Tel: +86 0755 2720 6813

Enabling Technology Serving People

Model: MR003

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party

responsible for compliance. such modifications could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement.

To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm

between the radiator and your body, and fully supported by the operating and installation

Inhaltsverzeichnis

Andere Mosentek Sicherheitssensor Handbücher

Mosentek

Mosentek MS036 Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung