Mostec M3605 Bedienungsanleitung

M3605 operating manual V1.01e 1

Operating Manual

Digital display unit

M3605

with five limit contacts

M3605 operating manual V1.01e 2

Warranty

Mostec warrants this product to be free of manufacturing defects for a 2-year period after

the original date of purchase. Within this period, defective products will be repaired free

of charge provided that the defect occurred during normal operation. This warranty does

not cover damage to the product resulting from ordinary usage such as front panel

scratches, broken control elements and corrosion, etc. The customer is responsible for

shipping and packing charges for products returned under warranty to Mostec. Mostec

warrants this product beyond the 2-year warranty period for an additional 2 years in case

of long term damages due to improper manufacturing. Such damages as poorly soldered

joints or other assembly problems are also covered by the warranty. Transportation

damages are not covered by the warranty and should be referred to the respective

delivery service.

M3605 operating manual V1.01e 3

Index: Page

A. Front Elements And Keyboard ............................................................................................ 4

B. Setup menu, setting the limits of the instruments ................................................................ 5

C. User Menu ........................................................................................................................... 6

Measurement settings ......................................................................................................... 6

Relay 1-5 settings................................................................................................................ 6

USB settings ....................................................................................................................... 6

Instrument settings .............................................................................................................. 6

D. Measurement settings ......................................................................................................... 7

Input range display .............................................................................................................. 7

Display range ...................................................................................................................... 7

Decimal point display .......................................................................................................... 7

Unit display .......................................................................................................................... 7

Input range signal ................................................................................................................ 7

Output range signal ............................................................................................................. 7

E. Relay Settings ..................................................................................................................... 8

F. USB settings........................................................................................................................ 9

Time setup ........................................................................................................................... 9

Date setup ........................................................................................................................... 9

Data log period .................................................................................................................... 9

Remove thumb drive ........................................................................................................... 9

USB characteristics ............................................................................................................. 9

B. USB error code .......................................................................................................... 9

G. Instrument settings ............................................................................................................ 10

Keyboard lock/unlock ........................................................................................................ 10

Language setting ............................................................................................................... 10

Customer label .................................................................................................................. 10

Factory setting ................................................................................................................... 10

Device info ........................................................................................................................ 10

6/6 ..................................................................................................................................... 10

Contrast ............................................................................................................................. 10

H. Factory Settings ................................................................................................................ 11

I. Mechanical Dimensions .................................................................................................... 12

J. Technical Data ................................................................................................................... 14

M3605 operating manual V1.01e 4

A. Front Elements And Keyboard

This listing only refers to the main screen, which shows up 3 seconds after power on.

Nr. Element Function Page

a. LED1 Errors, limit contacts, USB, wire break  -

b. LED2 no function -

c. LED3 no function

d. LED4 no function

F1 setup menu, direct display of limit contact 1 value 5

F2 setup menu, direct display of limit contact 2 value 5

F3 setup menu, direct display of limit contact 3 value 5

F4 setup menu, direct display of limit contact 4 value 5

ENT display the setup menu, input 5

ESC display the main menu, exit 6

+ plus 5-12

- minus 5-12

M3605 operating manual V1.01e 5

B. Setup menu, setting the limits of the instruments

The M3605 has 3 ways to change the limit values of the limit contacts. To make the handling of

the instrument simple, we have made a direct entry into the cursor menu available.

To enter the cursor menu below, you can either press the enter (ENT) key which leads you to

limit contact 1 directly. By pressing (ENT) again, limit contact 2 can be changed and so on until

limit contact 5.

By pressing (F1 to F4) you end up in the same menu, but directly on the desired limit contact.

Example: (F1) leads to limit contact 1, (F3) leads to limit contact 3 etc.

The third way, to set up the limit value is done by pressing the (ESC) key for more than 3

seconds. Then move with the arrow (+) / (-) keys to “Relay (Nr. of desired contact) settings”, press the

(ENT) key and move with the arrow (+) / (-) keys to “Rel (Nr. of desired contact): set point”. Then

press the (ENT) key again and change the limit value. Confirm with (ENT), skip with (ESC).

Quit the setup menu by pressing (ESC), or, wait a few seconds with no key operation. Values

can be altered with (+) and (-), or, depending on the menu, with the (F3) and (F4) as well.

Access to the

menu item

Menu Item Display Reaction

Change Values

press ENT 1x set limit contact

value 1

Limit 1 can also be

set by (F1) direct

LMT1 symbol blinks

Limit value is displayed

Adjust the value with (+)

and (-) .

(F1) or (ENT) saves the

settings

press ENT 2x set limit contact

value 2

Limit 2 can also be

set by (F2) direct

LMT2 symbol blinks

Limit value is displayed

Adjust the value with (+)

and (-).

(F2) or (ENT) saves the

settings

press ENT 3x set limit contact

value 3

Limit 3 can also be

set by (F3) direct

LMT3 symbol blinks

Limit value is displayed

Adjust the value with (+)

and (-).

(F3) or (ENT) saves the

settings

press ENT 4x

set limit contact

value 4

Limit 4 can also be

set by (F4) direct

LMT4 symbol blinks

Limit value is displayed

Adjust the value with (+)

and (-).

(F4) or (ENT) saves the

settings

press ENT 5x

set limit contact

value 5

LMT5 symbol blinks

Limit value is displayed

Adjust the value with (+)

and (-).

(ENT) saves the settings

press ENT 6x

USB USB-symbol blinks Set the USB logger on/off

M3605 operating manual V1.01e 6

C. User Menu

Access to menu: press and hold (ENT) for 3 seconds

Navigation in the menu: (+) and (-)

Access to a menu item: (ENT) = ENTER

Exit a menu item: (ESC) = ESCAPE

Adjust values: (+) and (-)

Menue Item Submenue Function/Comment

1/8

Measurement settings

Input range display,

Display range,

Decimal point display,

Unit display,

Input range signal,

Output range signal

See section D

2-6/8

Relay 1-5 settings

Rel1-5: behavior

Rel1-5: set point

Rel1-5: norm/inv

Rel1-5: LED norm/inv

Rel1-5: turn on delay

Rel1-5: turn off delay

Rel1-5: hysteresis

Rel1-5: label

See section E

7/8

USB settings

Time setup

Date setup

Data log period

Remove memory stick

See section G

8/8

Instrument settings

Keyboard lock/unlock

Language settings

Custom label

Factory setting

Instrument info

Contrast

See section H

M3605 operating manual V1.01e 7

D. Measurement settings

1) Press and hold (ESC) 3 seconds to enter the users menu.

2) Then you are already at item 1/8, ''Measurement settings''. If not move to 1/8 with (+).

3) Open menu item with (ENT)

4) Menu structure:

Example 1: Input: 4 … 18mA → Display: 1.70 … 5.60 % →Signal output: 4 … 20mA

Example 2: Input: 2.5V … 7.5V → Display: 37.5 ... 115.4 A →Signal output: 4 … 20mA

Menu Item Change Values Function/Comment

1/6

Input range display

Min: Set the minimum point:

Example 1:

The instruments input signal:

0 … 20mA

Requested range: 4 … 18mA

Now set the Min to:

(4mA : 20mA * 100%) = 20%

Max:

Set the maximum point:

(18mA : 20mA * 100%) = 90%

Min: 20% & Max: 90% leads

to a new range of 4 … 18mA

Example 2:

The instruments input signal:

0 … 10V

Requested range:

2.5 …. 7.5V

Min = (2.5V : 10V * 100%) = 25%

Max = (7.5V : 10V * 100%) = 75%

→ 25% … 75% leads to 2.5 …

7.5V

2/6

Display range

Set minimum display range in

the Example 1:

(only parts, ignore decimal pt)

Min: 170 (1.70 is desired)

Max: 560 (5.60 is desired)

Example 2:

(only parts ignore decimal pt)

Min: 375 (37.5 is desired)

Max: 1154 (115.4 is desired)

3/6

Decimal point display

Set the decimal point in the

Example 1:

XXX.X

XX.XX (1.70 is requested)

X.XXX

XXXX

Set the decimal point in the

Example 2:

XXX.X (37.5 is requested)

4/6

Unit display

Select the unit for the Display:

Start with the first character.

Use the (+) and (-) key to

select it (to the right the

number of the current

character can be seen)

1. Blank (character # 32)

then select the second

character with > (F3)

2. Percent symbol (char # 37)

Store with (ENT) (max. 4

characters).

Example 2:

(+) and (-) to select:

1. Blank (char # 32)

(F3) to move the cursor

(+) and (-) to select:

2. A (char # 65)

Store with (ENT)

5/6

Input range signal

Example 1:

Min: 1.70% with (+) and (-)

(ENT) to store and select

Max: 5.60% with (+) and (-)

store and leave with (ENT)

Example 2:

Min: 37.5A with (+) and (-)

(ENT) to store and select

Max: 115.4% with (+) and (-)

store and leave with (ENT)

6/6

Output range signal

Example 1:

Min: 4.0mA with (+) and (-)

(ENT) to store and select the

Max: 20.0mA with (+) and (-)

store and leave with (ENT)

Example 2:

Min: 4.0mA with (+) and (-)

(ENT) to store and select the

Max: 20.0mA with (+) and (-)

store and leave with (ENT)

M3605 operating manual V1.01e 8

E. Relay Settings

1) Press and hold (ESC) 3 seconds to enter the customer menu.

2) Go to menu item 2/8 to 6/8, “Relay x settings” with (+)

3) Open menu item with (ENT)

4) To confirm a selection press (ENT), exit with (ESC)

5) Menu structure:

Menue Item Change Values

1/8 Relay 1-5: behavior Switch with (+) between upper and lower

limit, confirm the selection with (ENT)

2/8 Relay 1-5: set point Change the set point value with (+) and

(-)

3/8 Relay 1-5: norm/inv? Switch with (+) between normal and

inverse operation and confirm the

selection with (ENT)

4/8 Relay 1-5: Led norm/inv? Switch with (+) between normal and

inverse operation and confirm the

selection with (ENT)

5/8 Relay 1-5: turn on delay Change the time delay with (+) and (-),

resolution is +/-1s

6/8 Relay 1-5: turn off delay Change the time delay with (+) and (-),

resolution is +/-1s

7/8 Relay 1-5: hysteresis Change the hysteresis of both set points

with (+) and (-), possible resolution is 5 to

200 parts of range

8/8 Relay 1-5: label Change characters with (+) and (-) and

jump with (F3) and (F4) to the next

character, confirm the label text with

(ENT).

M3605 operating manual V1.01e 9

F. USB settings

1) Press and hold (ESC) 3 seconds to enter the user menu.

2) Go to menu item 7/8 "USB settings" with (+).

3) Open menu item with (ENT)

4) To confirm a selection press (ENT), exit with (ESC)

5) Menu structure:

Menu Item Change Values Function/Comment

1/4

Time setup

Toggle with (+) between 12h and

24h format, confirm it with (ENT)

Set time format and time for logging

mode

2/4

Date setup

Toggle with (+) between

DDMMYY and MMDDYY format,

confirm with (ENT)

Set date format and date for logging

mode

3/4

Data log period

Set recording time interval with

(+) and (-) from5 to 7200sec .

Resolution: 1sec

4/4

Remove thumb drive

Toggle with (F3) between

stop/start logging

Close the current logging cycle before

removing the memory stick.

When the message ''USB: Start

logger?'' shows up, you may remove

the memory stick

USB characteristics

 Device accepts empty and FAT32 formatted memory sticks only.

 Date and clock settings remain stored up to 3 hours without power supply connection

 Set date and time before recording with the memory stick.

 Device starts automatically with logging data when memory stick is connected. 

 : Wait with removing the memory stick. It may take up to 5 minutes to write data to the stick.

 Internal data sets are stored in CSV format every 15 minutes. The file name characteristics after a

secure ejection, removing the memory stick in the USB sub menu, are:

''JJMMDDXX.csv''

JJ = last 2 digit of current year

MM = current month

DD = current day

XX = file counter 0-99

 Data will appear in a spreadsheet program as below:

 * The unit and the limit contact label is adjusted according to the instruments settings

Date Time Value[ %]* 1*

2* 3* 4* 5*

04.07.2018 12:12:55 10.00 0

1 0 1 1

04.07.2018 12:13:03 10.01 1

1 0 1 0

04.07.2018 12:13:04 10.03 0

0 0 1 0

04.07.2018 12:13:06 10.15 1

0 1 1 1

04.07.2018 12:13:07 10.78 1

1 1 0 1

B. USB error code

E: xx error description

01 drive not formatted

02 drive wrong formatted

03 drive is write protected

04 sector size not supported

M3605 operating manual V1.01e 10

G. Instrument settings

1) Press and hold (ESC) 3 seconds to enter the user menu.

2) Go to menu item 8/8 "Device settings" with (+).

3) Open menu item with (ENT)

4) To confirm a selection press (ENT), exit with (ESC)

5) Menu structure:

Menu Item Change Values Function/Comment

1/6

Keyboard lock/unlock

Set a code with (+) and (-)

between 1 and 999 to lock or

unlock the device, confirm the

code with (ENT)

If the keyboard is locked, you

won't be able to make changes in

the settings, until you have

unlocked it with the valid code.

Note:

Please contact us if you forgot the

code. We will then provide a

factory unlock code.

2/6

Language setting

Set the required language

with (+) and (-)

3/6

Customer label

Change characters with (+)

and (-), switch position with

(F3) and (F4), confirm Text

with (ENT).

Shows a customer label on main

screen. Maximum 16 characters

are possible.

4/6

Factory setting

Sets all values to default,

confirm with (ENT) or exit with

(ESC)

5/6

Device info

Exit with (ENT)

Shows firmware version, serial

number and calibrating points.

6/6

Contrast

Change the contrast with (+)

and (-), confirm with (ENT)

Keep in mind, that you will not be

able to move back to this item if

you select a contrast which

makes the graphics on the screen

invisible (too dark or too bright)

Inhaltsverzeichnis

Andere Mostec Monitor Handbücher

Mostec

Mostec M7829 Series Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung