Motif MT01004US Bedienungsanleitung

Item# MT01004US

HOUSEHOLD USE ONLY

Technical Data:

Rated voltage: AC 120 V, 60 Hz

Rated power input: 1525 W

MotifCoffee.com

• Superior Water

Heater

ensures ideal

brewing temperature

• Pre-Infusion Mode

releases the unique ﬂavors

of your coffee

• Advanced

Decalcification

Sensor

• Programmable

Timer

• Separate Warming

Plate Heater prevents

overheating

2-year limited warranty

Elements

Pour-Over Style

Coffee Brewer

Part # 56020-01

IMPORTANT SAFEGUARDS

This appliance is for household use only. When using electrical appliances,

basic safety precautions should always be followed to avoid ﬁres, electric

shocks, burns, or other injuries and damage. Read these operating and

safety instructions carefully. Call our toll-free customer service number for

information on examination, repair, and adjustments; do not attempt to repair

the appliance yourself.

Read all instructions.

• Do not touch hot surfaces - use the handles or knobs.

• Do not immerse cord, plugs or the appliance in water or other liquids.

• Unplug from outlet when not in use and before cleaning. Allow to cool before

putting on or taking off parts, and before cleaning the appliance.

• If children are present while the appliance is in use, keep them a safe

distance away.

• Do not operate the appliance if its cord, plug, or various parts have

been damaged.

• The use of accessory attachments is not recommended by the appliance

manufacturer and may result in ﬁre, electrical shock or personal injury.

• Do not use outdoors or in damp areas.

• Do not let the cord hang over the edge of a table or counter.

• Do not place appliance on or near a hot electric or gas burner,

or in a heated oven.

• To disconnect the appliance, ﬁrst turn the power switch off, then remove

plug from the wall outlet.

• Do not use this appliance for anything other than its intended use.

• Place the appliance on a ﬂat level surface.

• Do not attempt to operate the appliance without putting water in the tank.

Only fresh, cold water should be used in the tank. Do not use hot water.

• Never remove the carafe or ﬁlter basket during brewing cycle.

• Do not use a carafe with a loose or damaged handle.

• Never lay the thermal carafe on its side when it is full, even if the lid is

ﬁrmly attached.

• Do not clean carafe with abrasive cleansers, steel wool pads, or other

abrasive material.

• Do not remove the bottom cover from the appliance. There are no user-

serviceable parts inside.

• The carafe is designed for use with this appliance. It must never be used

on a range top.

• Make sure that the voltage in your home corresponds with the voltage

indicated on the bottom of the appliance.

• Do not attempt to operate the appliance if it only works intermittently,

or stops working altogether.

SAVE THESE INSTRUCTIONS!

EXTENSION CORDS

A short power-supply cord is provided to reduce the risk of tangling and tripping.

Longer detachable power-supply cords or extension cords are available and may

be used if care is exercised. If a detachable power-supply cord or extension cord

is used:

• The electrical rating of the extension cord should be appropriate for the electrical

rating of the appliance.

• The longer cord should be arranged so that it will not drape over the counter

top or tabletop where it can be tripped over, snagged, or pulled on, especially

if children are present.

POLARIZED PLUG

This appliance has a polarized plug, which means that one blade is wider than the

other. To reduce the risk of electric shock, this plug is designed to ﬁt into a polarized

outlet only one way. If plug does not fully ﬁt into the outlet, reverse it. If it still does

not ﬁt, contact a qualiﬁed electrician. Do not attempt to modify the plug.

1. Water tank lid

2. Water tank

3. Filter basket

4. Display

5. H(hours) button

6. M(minutes) button

7. TIMER SET button

8. ON/OFF switch, auto

shut off 90 minutes

after brew cycle

begins (Green LED)

9. ON/OFF switch

with Pre-Soak

(Pre-Infusion),

auto shut off

90 minutes after

brew cycle begins

(Blue LED)

10. Clean button

(Decalciﬁcation)

(Red LED)

11. Non-stick warming

plate

12. Carafe lid

13. Glass Carafe

Technical Data

Rated voltage:

AC 120 V, 60 Hz

Rated power input:

1525 W

Thank you

Thank you for selecting the Motif Elements Pour-Over Style

Coffee Brewer. It has been designed to help you elevate your

home experience. PLEASE READ ALL OUR INSTRUCTIONS to

assure operational excellence.

Limited warranty:

2 year limited warranty from the date of original purchase.

1. This warranty extends only to the original retail purchaser or gift recipient.

Keep the original sales receipt, as proof of purchase is required to make

a warranty claim.

2. Defects that occur due to improper connection, improper handling

or repair attempts by non-authorized persons are not covered by

the warranty. The same applies for failure to comply with the use

of consumables (e.g. cleaning and decalcifying agents) that do not

correspond to the original speciﬁcations.

3. This device was designed and built for household use only. It is not

suited for other uses.

4. Warranty does not cover damages that are not the responsibility of the

manufacturer. This is valid especially for claims arising from improper

use (e.g. operation with insufﬁcient current or improper voltage).

Please call 800-782-6671 for warranty claims.

Operations:

Before your ﬁrst use:

1. Remove packaging materials, labels, and stickers from the coffee brewer.

2. Wash ﬁlter basket and glass carafe with a mild dish detergent.

3. Read the BREWING INSTRUCTIONS section.

4. Clean the brewer by ﬁlling the water reservoir with fresh, ﬁltered, cold

water to the MAX line.

5.Set 24 hour clock to correct time by pressing the H (hour) and

M (minute) buttons.

6.Turn on the brewer and allow the water to run through a brew cycle.

7. Let the brewer cool down for 5 minutes before repeating the process at

least 2 more times before brewing coffee.

Brewing Instructions:

1. Swivel ﬁlter basket to right and remove it from the holder.

2. Remove the detachable water reservoir by holding the recessed grip

and pulling straight up.

3. Remove the water reservoir lid and ﬁll with the required volume of

fresh, ﬁltered, cold water to the desired batch size. Do not ﬁll above the

MAX line. (Fig.1)

4. Close the water reservoir by replacing the lid and insert it back into the

appliance. Please ensure that you replace the reservoir upright into the

appliance. The guide rails on the appliance (left of the reservoir) will

help you with this.

5. Fold over the seamed edges of a # 4 paper ﬁlter and place in the ﬁlter

basket. Scoop the ground coffee into the paper ﬁlter. (Fig.2)

6. Put the ﬁlter basket back into its holder. First hang the eyelet of the ﬁlter

on top of the swivel arm. Next, press the round base into the clip. An

audible click tells you it is inserted properly.

7. Swivel the ﬁlter back to the left to lock in place. Place the glass carafe

with closed lid onto warming plate. (Fig.3)

8. Set 24 hour clock to correct time by pressing H(hour) and

M(minute) buttons.

9. Press the ON/OFF button. The ON/Off button will illuminate in green

indicating the machine is operating. (Fig.4)

10. When the audible alarm sounds the brew process is complete.

Sometimes the ﬁlter basket may need a few more seconds to fully drain

before removing carafe.

11. The warming plate will remain on for 90 minutes.

Optional Pre-Soak (Pre-Infusion):

When using freshly roasted coffee (30-40 days old)

Pre-infusion mode helps eliminate any remaining CO2

gasses that can affect taste.

1. Press pre-soak ON/OFF button.

2. The pre-soak ON/OFF button will illuminate in blue, indicating the

pre-soak mode is operating.

3. When the audible alarm sounds the brew process is complete.

Sometimes the ﬁlter basket may need a few more seconds to fully drain.

4. Remove the carafe from the brewer and enjoy! The warming plate will

remain on for 90 minutes.

Convenient Timer Feature:

This allows you to set a time at which brewing will

automatically begin.

1. Prepare the appliance as described in Brewing Instructions but without

pressing the ON/OFF button.

2. To set the desired start time hold down the TIMER SET button and press

the H and M buttons repeatedly to set the desired start time. The ﬁrst

time you program it, the display will show 00:00.

3. After letting go of the TIMER button, the current time will show after two

seconds. The chosen start time is saved until you set a different time or

remove the appliance from the power source.

4. By brieﬂy pressing the TIMER SET button again, the timer feature is

activated for the next brewing process.

5.To show this, the TIMER SET illuminates in white.

6.By pressing the TIMER SET button again, the timer feature can be

deactivated at any time. The white LED goes off.

7. To brew coffee before the programmed start time press the ON/OFF

button. This will deactivate the timer.

Descaling:

In hard water areas, scaling from limestone content in the

water may build up in your brewer. Scaling can lead to

extended preparation time and possible damage to your

Motif Elements coffee brewer.

We recommend using a good quality biodegradable and

phosphate-free coffee machine descaler when your brewer’s

CLEAN button illuminates.

TO DESCALE:

The CLEAN button will illuminate in red when descaling is

recommended.

1. Fill the water reservoir according to the descaler manufacturer’s

instructions.

2. Press the CLEAN button. The light will illuminate in red and begin

ﬂashing.

3. The descaling process is ﬁnished when all descaler water is

brewed out.

4. When the reservoir is emptied and the descaling process is

complete, the red light will turn off.

5.Following the completed descaling process, brew two more times

with fresh, clean water.

Note: If you live in an area with above average limestone content, you

may have to descale more frequently. Indications that descaling is needed

include unusual noises or longer than normal brew times.

Brew Your Best™Coffee Tips:

At Motif, we’re committed to designing brewing equipment

that brings out the best in coffee, while providing you with the

educational insight to create a memorable coffee experience

every day.

From the decades of experience we’ve gathered in the Specialty Coffee

Community, combined with learnings from some of our important partners

like the Specialty Coffee Association (www.sca.coffee), we’ve identiﬁed a

few key best practices and elements to focus on.

Here are some key variables and a few best practices that we’ve

determined for brewing amazing coffee with your Elements coffee brewer.

Coffee and Water Amount/Weight

The most important thing to remember here is to brew to your preferences.

We all have unique taste, and we encourage you to embrace and enjoy

your coffee exactly the way you like. If you always use the same ratio of

water to coffee grounds, the ﬂavor of your coffee will be more consistent.

Of course, you can explore with more or less coffee, but it’s always good

to start with a base recipe. If available, using a scale to weigh your coffee is

the best way to stay consistent.

We also recommend brewing in 6 or 8 cup batches.

Here is what we recommend for the ELEMENTS brewer you’ve

purchased:

Batch Size Water Volume Coffee Weight Coffee Scoops (ground)

6-Cup batch 1000ml 55 grams 12 tbsp.

8-Cup batch 1300ml 65 grams 16 tbsp.

Inhaltsverzeichnis

Andere motif Kaffeemaschine Handbücher

motif

motif MT01002US Bedienungsanleitung

Beliebte Kaffeemaschine Handbücher anderer Marken

Bunn

Bunn AXIOM DV-APS Fehlerbehebungshandbuch

Touch

Touch T714C Bedienungsanleitung

Bunn

Bunn AXIOM-DV-3 Fehlerbehebungshandbuch

Bloomfield

Bloomfield Aquarius 8372EU Bedienungsanleitung

Animo

Animo optibean ng Produkthandbuch

BRAVILOR BONAMAT

BRAVILOR BONAMAT TH Bedienungsanleitung

Bonavita

Bonavita Metropolitan BV1901PW Bedienungsanleitung

motif MT01004US Bedienungsanleitung

Beliebte Kaffeemaschine Handbücher anderer Marken