Motorola solutions APX 1000 Bedienungsanleitung

APX 1000 USER GUIDE

APX TWO-WAY RADIOS

MODEL 2

*MN000254A01*

MN000254A01-BR

DECEMBER 2021

Software Version

All the features described in the following sections are supported by the software version R26.00.00 or

later.

See Accessing the Radio Information on page 87 to determine the software version of your radio.

Contact your system administrator for more details of all the supported features.

MN000254A01-BR

Software Version

Chapter 1

Read Me First

This User Guide covers the basic operation of the radio. However, your dealer or system administrator

may have customized your radio for your specific needs. Check with your dealer or system

administrator for more information.

1.1

Notations Used in This Manual

Notations such as Warning, Caution, and Notice are used throughout the text in this publication.

These notations are used to emphasize that safety hazards exist, and the care that must be taken or

observed.

WARNING: An operational procedure, practice, or condition and so on, which may result in

injury or death if not carefully observed.

CAUTION: An operational procedure, practice, or condition and so on, which may result in

damage to the equipment if not carefully observed.

NOTE: An operational procedure, practice, or condition and so on, which is essential to

emphasize.

The following special notations identify certain items.

Example Description

Home button or Buttons and keys are shown in bold print or as an icon.

Phon Phone Menu entries are shown similar to the way they appear on the

display of the radio.

This means “Press the right side of the 4-Way Navigation Button”.

This means the content with this icon is designated for radio with

Multi-Function Knob (MFK).

NOTE: Single knob radio is available for APX 1000 all

bands.

This means the content with this icon is designated for radio with

Volume Control Knob and 16–Position Select Knob.

NOTE: Two knobs radio is only available for APX 1000

900 MHz.

MN000254A01-BR

Read Me First

1.2

Radio Care

Proper radio usage and care ensure efficient operation and long life of the product.

CAUTION: Use the radio according to the following recommendations and warnings.

• Your radio casing has a vent port for pressure equalization in the radio. Never poke this vent

with objects such as needles, tweezers, or screwdrivers. Poking the vent could create

leak paths into the radio and the radio submergibility will be lost.

See the following picture for radio with Multi-function Knob.

See the following picture for radio with two knobs.

• Never obstruct or cover the vent port, even with a label.

• Ensure that no oily substances come in contact with the vent port.

• Your radio is designed to be submerged to a maximum depth of 6 feet and maximum time of

2 hours. Exceeding either maximum limit may result in damage to the radio.

• The radio with antenna attached properly is submersible to a maximum depth of 1 meter

(3.28 feet) and a maximum submersion time of 30 minutes. Exceeding either maximum limit

or use without antenna may result in damage to the radio.

• If the radio battery contacts are exposed to water without the battery attached, dry and clean

the radio battery contacts before attaching a battery to the radio. Turn the radio over with the

battery contact facing down and shake the radio so any trapped water can escape. A short

circuit of the contacts could occur if they are not dried properly.

• If the radio has been submerged in water, shake the radio to remove any water that is

trapped inside the speaker grille and microphone port. Otherwise, the water decreases the

audio quality of the radio.

MN000254A01-BR

Chapter 1 : Read Me First

• If an accessory is not attached to the radio, ensure that the accessory connector cover is

attached to the radio side accessory connector.

• If the radio is submerged or exposed to a high force water spray, such as from a hose,

remove the accessory or accessory connector cover immediately and ensure that no water

is forced into the accessory connector/radio interface. Rinse and dry the area and re-attach

the accessory or accessory connector cover if leakage occurs.

• If the radio is exposed to a corrosive environment, such as salt water or corrosive gases

or liquids, rinse and clean the radio immediately to prevent damage to radio materials,

especially plated surfaces. Remove the battery and the antenna before cleaning.

• Do not disassemble the radio as you could damage radio seals and result in leak paths into

the radio. Any radio maintenance should be performed only by a qualified radio technician.

• Only Underwriter Laboratory (UL) approved service centers can open and service UL

certified radios. Opening or repairing at unauthorized locations invalidates hazardous

location rating of the radio.

• Do not pound, drop, or throw the radio unnecessarily.

• When cleaning the radio, do not use a high-pressure jet spray as this may exceed the depth

pressure and cause water to leak into the radio.

1.2.1

Cleaning Your Radio

CAUTION: Do not use solvents to clean your radio as most chemicals may permanently

damage the radio housing and textures.

Do not submerge the radio in the detergent solution.

To clean the external surfaces of your radio, follow the procedure described next.

Procedure:

1Combine one teaspoon of mild dishwashing detergent to one gallon of water (0.5% solution).

2Apply the solution sparingly with a stiff, non-metallic, shortbristled brush, making sure that

excess detergent does not get entrapped near the connectors, controls, or crevices. Rinse and

then dry the radio thoroughly with a soft, lint-free cloth.

3Clean battery contacts with a lint-free cloth to remove dirt or grease.

1.2.2

Cleaning the External Surface of the Radio

Prerequisites:

CAUTION: Do not use solvents to clean your radio. Spirits may permanently damage the radio

housing.

Do not submerge the radio in detergent solution.

Procedure:

1Combine 1 teaspoon of mild dishwashing detergent to 1 gallon of water (0.5% solution).

2Apply the solution sparingly with a stiff, non-metallic, short-bristled brush, ensuring that excess

detergent does not get entrapped near the connectors, controls, or crevices.

3Dry the radio thoroughly with a soft, absorbent, lint-free cloth.

4Ensure that no water remains entrapped near the connectors, cracks, or crevices.

MN000254A01-BR

Chapter 1 : Read Me First

1.2.3

Radio Service and Repair

Proper repair and maintenance procedures ensure efficient operation and long life of this radio. A

Motorola Solutions maintenance agreement provides expert service to keep the radio and all other

communication equipment in perfect operating condition.

A nationwide service organization is provided by Motorola Solutions to support maintenance services.

Through its maintenance and installation program, Motorola Solutions makes the finest service

available to those desiring reliable continuous communications on a contract basis.

For a contract service agreement, contact your nearest Motorola Solutions service or sales

representative, or an authorized Motorola Solutions dealer.

1.3

Battery Recycling and Disposal

In the U.S. and Canada, Motorola Solutions participates in the nationwide Call2Recycle program for

battery collection and recycling. Many retailers and dealers participate in this program.

For the location of the drop-off facility closest to you, go to http://www.call2recycle.org/ or call 1-800-8-

BATTERY. This website and telephone number also provide other useful information concerning

recycling options for consumers, businesses, and governmental agencies.

1.4

What Your Dealer/System Administrator Can Tell You

If the radio is to be operated in extreme temperatures (less than -30 °C or more than +60 °C), check

with your system administrator for the correct radio settings.

You can consult your dealer or system administrator about the following:

• Is your radio programmed with any preset conventional channels?

• Which buttons have been programmed to access other features?

• What optional accessories may suit your needs?

NOTE: Specifications may vary for different radio models. Contact your system administrator for

more information.

MN000254A01-BR

Chapter 1 : Read Me First

Chapter 2

Preparing Your Radio for Use

This section provides simple instructions to prepare your radio for use.

2.1

Charging the Battery

Prerequisites:

WARNING: To avoid a possible explosion:

• Do not replace the battery in any area labeled hazardous atmosphere.

• Do not discard batteries in a fire.

When and where to use:Motorola Solutions-approved battery shipped with your radio is uncharged.

Prior to using a new battery, charge it for a minimum of 16 hours to ensure optimum capacity and

performance. For a list of Motorola Solutions-authorized batteries and chargers available for use with

your radio, see Accessories on page 93.

NOTE: When charging a battery attached to a radio, the radio must be turned off.

Procedure:

To charge the battery, place the battery (with or without the radio) in a Motorola Solutions-

approved charger.

The LED on the charger indicates the charging progress, see the Charger User Guide.

2.2

Attaching the Battery

If your radio is preprogrammed with volatile-key retention, the encryption keys are retained for

approximately 30 seconds after battery removal. Check with your dealer or system administrator for

more information.

You can view the status of the battery if the radio is using an IMPRES battery.

NOTE:

User is notified if radio detects non-Motorola Solutions battery upon powering up, charging, or

removing from the charger. This feature is applicable for IMPRES and Non-IMPRES battery.

When the radio is attached with the non-Motorola Solutions battery, a tone sounds, display

shows Unknown Battry temporarily and battery indicator is not shown in the radio display.

Battery menu screen displays Unknown Battry permanently and IMPRES battery information

is not shown on the radio display.

Procedure:

1Slide the battery into the radio frame until the latch at the bottom of the radio clicks into place.

2To remove the battery, turn the radio off. Lift the latch at the bottom of the radio, then slide the

battery out from the radio.

MN000254A01-BR

Preparing Your Radio for Use

2.3

Attaching the Antenna

Prerequisites:Ensure the radio is turned off before attaching the antenna.

Procedure:

1Set the antenna in the receptacle.

2Turn the antenna clockwise to attach to the radio.

3To remove the antenna, turn the antenna counterclockwise.

NOTE: When removing the antenna, ensure that the radio is turned off.

2.4

Removing and Attaching the Accessory Connector Cover

The accessory connector is on the antenna side of the radio. It is used to connect accessories to the

radio.

NOTE: To prevent damage to the connector, shield it with the connector cover when not in use.

Procedure:

1To remove the accessory connector cover, rotate the thumbscrew counterclockwise until it

disengages from the radio.

NOTE: If the thumbscrew is too tight, use an Allen wrench at to loosen it.

2Rotate and lift the connector cover to disengage it from the radio.

3To attach the accessory connector cover, insert the hooked end of the cover into the slot above

the connector.

4Press the top of the cover downward to seat it in the slot.

5Tighten by rotating the thumbscrew clockwise by hand.

2.5

Attaching the Belt Clip

Procedure:

1Align the grooves of the belt clip with those of the radio and push down until you hear a click.

2To remove the clip, use a flat-bladed object to press the belt clip tab away from the radio.

3Slide the clip upward and away from the radio.

2.6

Turning On the Radio

Procedure:

• If the power-up test is successful, the display shows SELFTEST momentarily, followed by the

Home screen and the Codeplug Alias.

MN000254A01-BR

Chapter 2 : Preparing Your Radio for Use

• If the power-up test is unsuccessful, you see Error XX/YY (XX/YY is an alphanumeric

code).

NOTE:

If the radio fails to power-up after repeating a few times, record the Error XX/YY code

and contact your dealer.

Codeplug Alias feature is enabled through Customer Programming Software (CPS)

configuration to display the codeplug alias as a temporary text during power on.

2.7

Adjusting the Volume

When and where to use:

Ensure the radio is powered on.

Your radio is preprogrammed to reset to medium volume rate, which is Level 12, by default every time

the radio powers up.

Procedure:

2To decrease the volume, rotate the knob counterclockwise.

MN000254A01-BR

Chapter 2 : Preparing Your Radio for Use

Chapter 3

Radio Controls

This chapter explains the buttons and functions to control the radio.

3.1

Radio Parts and Controls

APX 1000 with Multi-Function Knob (MFK).

NOTE: Single knob radio is available for APX 1000 all bands.

MN000254A01-BR

Chapter 3 : Radio Controls

Inhaltsverzeichnis

Andere Motorola solutions Radio Handbücher

Motorola solutions

Motorola solutions MTP3550 Bedienungsanleitung

Motorola solutions

Motorola solutions ADVISOR TPG2200 TETRA Bedienungsanleitung

Motorola solutions

Motorola solutions APX 8500 E5 CONTROL HEAD Referenzhandbuch

Motorola solutions

Motorola solutions APX6500 O5 Referenzhandbuch

Motorola solutions

Motorola solutions MINITOR 7 Bedienungsanleitung

Motorola solutions

Motorola solutions WAVE TLK 150 Bedienungsanleitung

Motorola solutions

Motorola solutions ST7500 Bedienungsanleitung

Motorola solutions

Motorola solutions ASTRO APX E5 Bedienungsanleitung

Motorola solutions

Motorola solutions APX 900 Bedienungsanleitung

Motorola solutions

Motorola solutions CB400 Series Bedienungsanleitung

Motorola solutions

Motorola solutions APX N70 Bedienungsanleitung

Motorola solutions

Motorola solutions APX4500 O2 Referenzhandbuch

Motorola solutions

Motorola solutions ASTRO APX E5 Bedienungsanleitung

Motorola solutions

Motorola solutions APX NEXT XN Bedienungsanleitung

Motorola solutions

Motorola solutions MTP3500 Bedienungsanleitung

Motorola solutions

Motorola solutions ATS 2500p Bedienungsanleitung

Motorola solutions

Motorola solutions APX P25 Mobile Bedienungsanleitung

Motorola solutions

Motorola solutions ADVISOR TPG2200 TETRA Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

auna multimedia

auna multimedia Yellowstone 10026851 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung