Motorola MT146 Bedienungsanleitung

0099002208-01

MODEL / MODELO / MODÈLE :

MT146

Automatic Battery Charger/Maintainer

Cargador de baterías automático /

Mantenedor

Chargeur / Mainteneur de batterie

automatique

OWNERS MANUAL / MANUAL DEL USUARIO

MANUEL D’UTILISATION

PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.

This manual will explain how to use the unit safely and effectively. Please read

and follow these instructions and precautions carefully.

POR FAVOR CONSERVE ESTE MANUAL DEL USUARIO Y LEALO ANTES DE

CADA USO. En este manual le explica cómo utilizar la unidad de manera segura

y conable. Por favor, lea y siga las siguientes instrucciones y precauciones.

GARDER LE MANUEL D’INSTRUCTION ET LISEZ LE AVANT CHAQUE

UTILISATION. Ce manuel explique comment utiliser l’unité d’une façon securitaire

et efcace. S’il vous plaît lisez et suivez ces instructions et precautions.

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ..........................................................................................5

PERSONAL SAFETY PRECAUTIONS.............................................................................................5

PREPARING TO CHARGE ...............................................................................................................6

CHARGER LOCATION .....................................................................................................................6

DC CONNECTION PRECAUTIONS.................................................................................................6

FOLLOW THESE STEPS WHEN BATTERY IS INSTALLED IN VEHICLE .....................................6

FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE .............................................7

GROUNDING AND AC POWER CORD CONNECTIONS ..............................................................7

ASSEMBLY INSTRUCTIONS ...........................................................................................................7

CONTROL PANEL.............................................................................................................................7

OPERATING INSTRUCTIONS .........................................................................................................8

MAINTENANCE AND CARE.............................................................................................................9

TROUBLESHOOTING ......................................................................................................................9

BEFORE RETURNING FOR REPAIRS..........................................................................................10

SPECIFICATIONS ...........................................................................................................................10

LIMITED WARRANTY ..................................................................................................................... 11

WARRANTY CARD .........................................................................................................................27

CONTENIDOS

INSTRUCCIONES IMPORTANTES DE SEGURIDAD...................................................................12

PRECAUCIONES DE SEGURIDAD PERSONAL..........................................................................12

PREPARACIÓN PARA LA CARGA.................................................................................................13

UBICACIÓN DEL CARGADOR.......................................................................................................13

PRECAUCIONES DE CONEXIÓN EN CC.....................................................................................13

SIGA ESTOS PASOS CUANDO LA BATERÍA ESTÉ COLOCADA EN EL VEHÍCULO ................14

SIGA ESTOS PASOS CUANDO LA BATERÍA SE ENCUENTRE FUERA DEL VEHÍCULO.........14

CONEXIONES A TIERRA Y ENERGÍA DE CA...............................................................................15

INSTRUCCIONES DE MONTAJE...................................................................................................15

PANEL DE CONTROL.....................................................................................................................15

INSTRUCCIONES DE OPERACIÓN..............................................................................................15

MANTENIMIENTO Y CUIDADO .....................................................................................................17

LOCALIZACIÓN Y SOLUCIÓN DE PROBLEMAS.........................................................................17

ANTES DE DEVOLVER A REPARACIONES .................................................................................18

ESPECIFICACIONES .....................................................................................................................18

GARANTÍA LIMITADA .....................................................................................................................19

TARJETA DE GARANTÍA................................................................................................................27

TABLE DES MATIÈRES

CONSIGNES DE SÉCURITÉ IMPORTANTES ..............................................................................20

MESURES DE SÉCURITÉ PERSONNELLE .................................................................................20

PRÉPARATION POUR LE CHARGEMENT ...................................................................................21

EMPLACEMENT DU CHARGEUR.................................................................................................21

PRÉCAUTIONS SUR LA CONNEXION C.C. .................................................................................21

ÉTAPES À SUIVRE QUAND LA BATTERIE EST INSTALLÉE DANS UN VÉHICULE .................21

ÉTAPES À SUIVRE QUAND LA BATTERIE EST INSTALLÉE HORS DU VÉHICULE.................22

MISE À LA TERRE ET CORDON D’ÉNERGIE CA........................................................................22

DIRECTIVES D’ASSEMBLAGE......................................................................................................22

PANNEAU DE CONTRÔLE ............................................................................................................23

CONSIGNES D’UTILISATION.........................................................................................................23

MAINTENANCE ET ENTRETIEN ...................................................................................................24

TABLEAU DE DÉPANNAGE...........................................................................................................25

AVANT DE RETOURNER POUR LES RÉPARATIONS .................................................................26

SPÉCIFICATIONS ...........................................................................................................................26

GARANTIE LIMITÉE .......................................................................................................................26

CARTE DE GARANTIE ...................................................................................................................28

•5•

1. IMPORTANT SAFETY INSTRUCTIONS

1.1 SAVE THESE INSTRUCTIONS –

This manual contains important safety

and operating instructions.

1.2 Keep out of reach of children.

1.3 Do not expose the charger to rain or

snow.

1.4 Use of an attachment not recommended

or sold by the battery charger

manufacturer may result in a risk of re,

electric shock or injury to persons.

1.5 To reduce the risk of damage to electric

plug and cord, pull by the plug rather than

the cord when disconnecting charger.

1.6 An extension cord should not be used

unless absolutely necessary. Use of

improper extension cord could result

in a risk of re and electric shock. If an

extension cord must be used, make sure:

• The pins on plug of extension cord are

the same number, size and shape as

those of plug on charger.

• The extension cord is properly wired and

in good electrical condition.

• The wire size is large enough for AC

ampere rating of charger, as specied in

section 8.

1.7 Do not operate charger with damaged

cord or plug – replace the cord or plug

immediately.

1.8 Do not operate charger if it has received

a sharp blow, been dropped, or otherwise

damaged in any way; take it to a qualied

serviceperson.

1.9 Do not disassemble charger; take it to

a qualied serviceman when service or

repair is required. Incorrect reassembly

may result in a risk of electric shock or

re.

1.10 To reduce risk of electric shock, unplug

charger from outlet before attempting

any maintenance or cleaning. Turning off

controls will not reduce this risk.

1.11 WARNING:

RISK OF EXPLOSIVE GASES.

a. WORKING IN VICINITY OF A LEAD-

ACID BATTERY IS DANGEROUS.

BATTERIES GENERATE EXPLOSIVE

GASES DURING NORMAL BATTERY

OPERATION. FOR THIS REASON, IT

IS OF UTMOST IMPORTANCE THAT

YOU FOLLOW THE INSTRUCTIONS

EACH TIME YOU USE THE

CHARGER.

b. To reduce risk of battery explosion,

follow these instructions and those

published by battery manufacturer

and manufacturer of any equipment

you intend to use in vicinity of battery.

Review cautionary markings on these

products and on the engine.

2. PERSONAL SAFETY PRECAUTIONS

2.1 Consider having someone close enough

by to come to your aid when you work

near a lead-acid battery.

2.2 Have plenty of fresh water and soap

nearby in case battery acid contacts skin,

clothing, or eyes.

2.3 Wear complete eye protection and

clothing protection. Avoid touching eyes

while working near battery.

2.4 If battery acid contacts skin or clothing,

wash immediately with soap and water.

If acid enters eye, immediately ood

eye with running cold water for at least

10 minutes and get medical attention

immediately.

2.5 NEVER smoke or allow a spark or ame

in vicinity of battery or engine.

2.6 Be extra cautious to reduce risk of

dropping a metal tool onto battery. It might

spark or short-circuit battery or other

electrical part that may cause explosion.

2.7 Remove personal metal items such as

rings, bracelets, necklaces, and watches

when working with a lead-acid battery. A

lead-acid battery can produce a short-

circuit current high enough to weld a ring

or the like to metal, causing a severe burn.

2.8 Use the charger for charging only

12V LEAD-ACID (STD, AGM or GEL)

rechargeable batteries. It is not intended

to supply power to a low voltage electrical

system other than in a starter-motor

application. Do not use battery charger

for charging dry-cell batteries that are

commonly used with home appliances.

These batteries may burst and cause

injury to persons and damage to property.

2.9 NEVER charge a frozen battery.

•6•

3. PREPARING TO CHARGE

3.1 If necessary to remove battery from

vehicle to charge, always remove

grounded terminal from battery rst. Make

sure all accessories in the vehicle are off,

so as not to cause an arc.

3.2 Be sure area around battery is well

ventilated while battery is being charged.

3.3 Clean battery terminals. Be careful to

keep corrosion from coming in contact

with eyes.

3.4 Add distilled water in each cell until

battery acid reaches level specied by

battery manufacturer. Do not overll. For a

battery without removable cell caps, such

as valve regulated lead acid batteries,

carefully follow manufacturer’s recharging

instructions.

3.5 Study all battery manufacturer’s

specic precautions while charging and

recommended rates of charge.

3.6 Determine voltage of battery by referring

to car owner’s manual and make sure that

output voltage selector switch is set at

correct voltage. If charger has adjustable

charge rate, charge battery initially at

lowest rate.

4. CHARGER LOCATION

4.1 Locate charger as far away from battery

as DC cables permit.

4.2 Never place charger directly above

battery being charged; gases from battery

will corrode and damage charger.

4.3 Never allow battery acid to drip on

charger when reading electrolyte specic

gravity or lling battery.

4.4 Do not operate charger in a closed-in

area or restrict ventilation in any way.

4.5 Do not set a battery on top of charger.

5. DC CONNECTION PRECAUTIONS

5.1 Connect and disconnect DC output clips

only after setting any charger switches to

“off” position and removing AC cord from

electric outlet. Never allow clips to touch

each other.

5.2 Attach clips to battery and chassis, as

indicated in sections 6 and 7.

6. FOLLOW THESE STEPS WHEN BATTERY IS INSTALLED IN VEHICLE

WARNING: A SPARK NEAR THE

BATTERY MAY CAUSE A BATTERY

EXPLOSION. TO REDUCE THE RISK

OF A SPARK NEAR THE BATTERY:

6.1 Position AC and DC cords to reduce risk

of damage by hood, door, or moving

engine part.

6.2 Stay clear of fan blades, belts, pulleys,

and other parts that can cause injury to

persons.

6.3 Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has larger

diameter than NEGATIVE (NEG, N, –) post.

6.4 Determine which post of battery is

grounded (connected) to the chassis. If

negative post is grounded to chassis (as

in most vehicles), see (6.5). If positive

post is grounded to the chassis, see (6.6).

6.5 For negative-grounded vehicle, connect

POSITIVE (RED) clip from battery charger

to POSITIVE (POS, P, +) ungrounded post

of battery. Connect NEGATIVE (BLACK)

clip to vehicle chassis or engine block

away from battery. Do not connect clip to

carburetor, fuel lines, or sheet-metal body

parts. Connect to a heavy gauge metal

part of the frame or engine block.

6.6 For positive-grounded vehicle, connect

NEGATIVE (BLACK) clip from battery

charger to NEGATIVE (NEG, N, –)

ungrounded post of battery. Connect

POSITIVE (RED) clip to vehicle chassis

or engine block away from battery. Do

not connect clip to carburetor, fuel lines,

or sheet-metal body parts. Connect to a

heavy gauge metal part of the frame or

engine block.

6.7 When disconnecting charger, turn

switches to off, disconnect AC cord,

remove clip from vehicle chassis, and

then remove clip from battery terminal.

6.8 See Operating Instructions for length of

charge information.

•7•

7. FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE

WARNING: A SPARK NEAR THE

BATTERY MAY CAUSE A BATTERY

EXPLOSION. TO REDUCE THE RISK

OF A SPARK NEAR THE BATTERY:

7.1 Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has a larger

diameter than NEGATIVE (NEG, N, –) post.

7.2 Attach at least a 24-inch-long 6-gauge

(AWG) insulated battery cable to

NEGATIVE (NEG, N, –) battery post.

7.3 Connect POSITIVE (RED) charger clip to

POSITIVE (POS, P, +) post of battery.

7.4 Position yourself and free end of cable as

far away from battery as possible – then

connect NEGATIVE (BLACK) charger clip

to free end of cable.

7.5 Do not face battery when making nal

connection.

7.6 When disconnecting charger, always do

so in reverse sequence of connecting

procedure and break rst connection while

as far away from battery as practical.

7.7 A marine (boat) battery must be removed

and charged on shore. To charge it on

board requires equipment specially

designed for marine use.

8. GROUNDING AND AC POWER CORD CONNECTIONS

8.1 This battery charger is for use on a

nominal 120 volt circuit. The plug must

be plugged into an outlet that is properly

installed and grounded in accordance with

all local codes and ordinances. The plug

pins must t the receptacle (outlet). Do not

use with an ungrounded system.

8.2 DANGER: Never alter the AC cord or

plug provided – if it does not t the outlet,

have a proper grounded outlet installed

by a qualied electrician. An improper

connection can result in a risk of an electric

shock or electrocution.

8.3 USING AN EXTENSION CORD

The use of an extension cord is not

recommended. If you must use an

extension cord, follow these guidelines:

• Pins on plug of extension cord must be

the same number, size, and shape as

those of plug on charger.

• Ensure that the extension cord is properly

wired and in good electrical condition.

• Wire size must be large enough for the AC

ampere rating of charger, as specied:

Length of cord (feet) 25 50 100 150

AWG* size of cord 18 18 16 14

*AWG-American Wire Gauge

9. ASSEMBLY INSTRUCTIONS

9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.

10. CONTROL PANEL

START/STOP BUTTON

Press to immediately begin charging your

properly connected battery. If the button is

not pressed, charging should begin in ten

minutes.

LED INDICATORS

POWER (green) LED lit: The charger

is connected to an AC outlet.

BAD BATTERY (red) LED lit:

The charger has detected a problem

with the battery. See Troubleshooting

for more information.

CLAMPS REVERSED (red) LED

ashing: The connections are

reversed.

CHARGING (yellow/orange) LED lit:

The charger is charging the battery.

CHARGED/MAINTAINING (green)

LED solid: The battery is fully charged

and the charger is in maintain mode.

NOTE: See Operating Instructions for a

complete description of the charger modes.

•8•

11. OPERATING INSTRUCTIONS

WARNING: A SPARK NEAR A LEAD-

ACID BATTERY MAY CAUSE AN

EXPLOSION

IMPORTANT: Do not start the vehicle with

the charger connected to the AC outlet, or

it could damage the charger.

CHARGING A BATTERY

IN THE VEHICLE

1. Turn off all the vehicle’s accessories.

2. Keep the hood open.

3. Clean the battery terminals.

4. Place the charger on a dry, non-

ammable surface.

5. Lay the AC/DC cables away from any

fan blades, belts, pulleys and other

moving parts.

6. Connect the battery, following the

precautions listed in sections 6 and 7.

7. Connect the charger to a live

grounded 120V AC outlet.

8. The green Power LED will light.

9. Press the Start/Stop button.

10. When charging is complete,

disconnect the charger from the AC

power, remove the clamp from the

vehicle’s chassis, and then remove

the clamp from the battery terminal.

CHARGING A BATTERY

OUTSIDE OF THE VEHICLE

1. Place battery in a well-ventilated area.

2. Clean the battery terminals.

3. Connect the battery, following the

precautions listed in sections 6 and 7.

4. Connect the charger to a live

grounded 120V AC outlet.

5. The green Power LED will light.

6. Press the Start/Stop button.

7. When charging is complete,

disconnect the charger from the AC

power, disconnect the negative clamp,

and nally the positive clamp.

8. A marine (boat) battery must be

removed and charged on shore.

CHARGE RATE

The charge rate is measured in amps.

The charger will automatically adjust the

charging current, based on battery size,

in order to charge the battery completely,

efciently and safely. Do not use for

industrial applications.

POWER-UP IDLE TIME LIMIT

If the Start/Stop button is not pressed

within 10 minutes after the battery

charger is rst powered up, charging

will automatically begin, when properly

connected to a battery.

AUTOMATIC CHARGING MODE

When an Automatic Charge is performed,

the charger switches to the maintain

mode automatically after the battery is

charged.

BATTERY CHARGING TIMES

APPLICATION BATTERY

SIZE CHARGING TIME (Hours)

2A 6A 8A 10A

POWERSPORTS

6Ah 6

32 Ah 15

AUTOMOTIVE

300 CCA 12

1000 CCA 30

MARINE

50 Ah 15

105Ah 33

1.75

4.5

3.5

8. 5

4.2 5

9.5

1.5

3.5

Times are based on a 50% discharged

battery and may change, depending on age

and condition of battery.

ABORTED CHARGE

If charging cannot be completed normally,

charging will abort. When charging aborts,

the charger’s output is shut off and the

Bad Battery (red) LED will light. Do not

continue attempting to charge this battery.

Check the battery and replace, if necessary.

DESULFATION MODE

If a sulfated battery is detected, the

Bad Battery (red) LED will light

immediately. Desulfation could take 8-10

hours. If desulfation fails, charging will abort.

If desulfation is successful, the unit will

automatically begin charging, and the

Charging (yellow/orange) LED will light.

•9•

COMPLETION OF CHARGE

Charge completion is indicated by the

Charged/Maintaining (green) LED.

When solid, the charger has switched to

maintain mode.

MAINTAIN MODE

(FLOAT MODE MONITORING)

When the Charged/Maintaining

(green) LED is solid, the charger has

started maintain mode. In this mode,

the charger keeps the battery fully

charged by delivering a small current

when necessary. If the charger has to

provide its maximum maintain current

for a continuous 12 hour period, it will

go into Abort Mode (see Aborted Charge

section). This is usually caused by a drain

on the battery or the battery could be

bad. Make sure there are no loads on the

battery. If there are, remove them. If there

are none, have the battery checked or

replaced.

MAINTAINING A BATTERY

This unit maintains 12 volt batteries,

keeping them at full charge. It can

charge and maintain both small and large

batteries.

NOTE: The maintain mode technology

allows you to safely charge and maintain

a healthy battery for extended periods of

time. However, problems with the battery,

electrical problems in the vehicle, improper

connections or other unanticipated

conditions could cause excessive current

draws. As such, occasionally monitoring

your battery and the charging process is

recommended.

12. MAINTENANCE AND CARE

A minimal amount of care can keep your

battery charger working properly for years.

• Clean the clamps each time you are

nished charging. Wipe off any battery

uid that may have come in contact with

the clamps, to prevent corrosion.

• Occasionally cleaning the case of the

charger with a soft cloth will keep the

nish shiny and help prevent corrosion.

• Coil the input and output cords neatly

when storing the charger. This will help

prevent accidental damage to the cords

and charger.

• Store the charger unplugged from the AC

power outlet, in an upright position.

• Store inside, in a cool, dry place. Do not

store the clamps on the handle, clipped

together, on or around metal, or clipped

to the cables.

13. TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

The Power LED does not

light when charger is properly

connected.

AC outlet is dead.

Poor electrical connection.

Check for open fuse or circuit

breaker supplying AC outlet.

Check power cord and

extension cord for a loose

tting plug.

The battery is correctly

connected, but the

Charging LED did not light

immediately.

If the START/STOP button is

not pressed, charging should

begin in ten minutes.

No problem; this is normal.

The battery is properly

connected, but the

Charging LED never lit.

The battery voltage is low. Press the START/STOP

button to start charging.

•10 •

PROBLEM POSSIBLE CAUSE SOLUTION

The red Bad Battery LED

is lit.

The battery voltage is still

below 10V after 2 hours of

charging.

(or)

In maintain mode, the output

current is more than 1.5A for

12 hours.

The battery is sulfated.

Lack of progress is detected

and battery voltage is below

14.2V.

The battery’s initial voltage

is below 12.2V and the total

input is less than 1.5 Ah.

The battery voltage drops

to below 12.2V in Maintain

Mode.

The battery may be defective.

Make sure there are no

loads on the battery. If there

are, remove them. If there

are none, have the battery

checked or replaced.

The charger is in desulfation

mode.Continue charging

for several hours. If not

successful, have the battery

checked.

The battery may be

overheated. If so, allow the

battery to cool. The battery

may be too large or have a

short circuit. Have battery

checked or replaced.

The battery capacity is too

low, or the battery is too old.

Have it checked or replaced.

The battery won’t hold a

charge. May be caused by

a drain on the battery or

the battery could be bad.

Make sure there are no

loads on the battery. If there

are, remove them. If there

are none, have the battery

checked or replaced.

14. BEFORE RETURNING FOR REPAIRS

If these solutions do not eliminate the problem, or for more information

about troubleshooting, contact customer service for assistance:

Email: [email protected]

www.MotorolaHome.com

Or call 1-833-334-9925

15. SPECIFICATIONS

Input Voltage..................................................................................120V AC @ 60Hz, 2.5A

Output Voltage ..............................................................................................................12V

Output Current Rating...........................................................................10A DC @ 12V DC

Inhaltsverzeichnis

Sprachen:

Andere Motorola Autobatterieladegerät Handbücher

Motorola

Motorola APX NEXT Bedienungsanleitung

Beliebte Autobatterieladegerät Handbücher anderer Marken

ULTIMATE SPEED

ULTIMATE SPEED ULGD 3.8 A1 Bedienungsanleitung

HYPERVOLT

HYPERVOLT Home 3.0 Bedienungsanleitung

Growatt

Growatt THOR 11AS-S/P Bedienungsanleitung

Ingeteam

Ingeteam Ingerev Garage Bedienungsanleitung

DEFA

DEFA Power 715000 Bedienungsanleitung

iTechworld

iTechworld iTECHDCDC20 Bedienungsanleitung

EM2GO

EM2GO Take Bedienungsanleitung

Booster

Booster TRUCK PAC ES1224 Bedienungsanleitung

Teison

Teison TS-PEC-002 Bedienungsanleitung

Schumacher

Schumacher SI-200A Bedienungsanleitung

YingLi

YingLi YLEV50A-L3 Bedienungsanleitung

ABL

ABL eMH1 WALLBOX Bedienungsanleitung

GARO

GARO LS4 Wallmounted Kurzanleitung

CTEK

CTEK MXS 5.0 CHECK Bedienungsanleitung

Hama

Hama 54183 Bedienungsanleitung

Cartrend

Cartrend DP 4000 Bedienungsanleitung

Ryobi

Ryobi P131 Konfigurationshandbuch

FLUXE

FLUXE M3P U Series Bedienungsanleitung