Motorola HC05F6 Bedienungsanleitung

MOTOROLA

SEMICONDUCTOR

USER’S MANUAL

HC05F6EMUM/D

July, 1996

HC05F6

EMULATOR MODULE

USER’S MANUAL

First Edition

Motorola reserves the right to make changes without futher notice to any products herein to

improve reliability, function, or design. Motorola does not assume any liability arising out of the

application or use of any product or circuit described herein; neither does it convey any license

under its patent rights nor the rights of others. Motorola products are not designed, intended, or

authorized for use as components in systems intended for surgical implant into the body, or other

application in which the failure of the Motorola product could create a situation where personal

injury or death may occur. Should buyer purchase or use Motorola products for any such unin-

tended or unauthorized application, Buyer shall indemnify and hold Motorola and its ofﬁcers,

employees, subsidiaries, afﬁliates, and distributors harmless against all claims, costs, damages,

and expanses, and reasonable attorney fees arising out of, directly or indirectly, any claim of per-

sonal injury or death associated with such unintended or unauthorized use, even if such claim

alleges that Motorola was negligent regarding the design or manufacture of the part.

Motorola and the Motorola logo are registered trademarks of Motorola Inc.

Motorola Inc. is an Equal Opportunity/Afﬁrmative Action Employer.

HC05F6EM USER”S MANUAL MOTOROLA

CONTENTS

CHAPTER 1 INTRODUCTION ........................................................................ 1-1

1.1 Development Systems .................................................................................. 1-1

1.1.1 Motorola Modular Development System (MMDS05) ...................... 1-1

1.1.2 M68HC05EVS Evaluation System (HC05EVS) ............................... 1-2

1.2 EM Layout ................................................................................................... 1-3

1.3 Connector Pin Assignments (P7 AND P8) .................................................. 1-4

CHAPTER 2 MMDS05 CONFIGURATION AND OPERATION .................... 2-1

2.1 Setting F6EM Jumper Headers .................................................................... 2-1

2.1.1 Reset Select Header (P4) ................................................................... 2-1

2.1.2 Clock Source Select Header (P6) ...................................................... 2-2

2.1.3 SCS1 Header (P9) .............................................................................. 2-3

2.1.4 SCS0 Header (P10) ............................................................................ 2-3

2.2 Installing Personality And Help Files .......................................................... 2-4

2.2.1 Personality File .................................................................................. 2-4

2.2.2 Help File ............................................................................................ 2-4

2.3 Remaining System Installation .................................................................... 2-5

CHAPTER 3 HC05EVS CONFIGURATION AND OPERATION ................... 3-1

3.1 Setting F6EM Jumper Headers .................................................................... 3-1

3.1.1 Reset Select Header (P4) ................................................................... 3-1

3.1.2 Clock Source Select Header (P6) ...................................................... 3-2

3.1.3 SCS1 Header (P9) .............................................................................. 3-3

3.1.4 SCS10 Header (P10) .......................................................................... 3-3

3.2 EVS Limitations ......................................................................................... 3-4

3.3 Logic Analyzer Connector P1 ...................................................................... 3-5

3.4 Remaining System Installation ................................................................... 3-7

HC05F6EM USER”S MANUAL

MOTOROLA

1FIGURES

Figure Page

1-1 HC05F6 Emulator Module .......................................................................... 1-3

1-2 Connector P7 Pin Assignment ..................................................................... 1-4

1-3 Connector P8 Pin Assignment ..................................................................... 1-5

3-1 Connector P1 Pin Assignment ..................................................................... 3-5

TABLES

Table Page

3-1 Logic Analyzer Connector P1 Signal Descriptions ..................................... 3-6

HC05F6EM USER’S MANUAL MOTOROLA

1-1

CHAPTER 1 INTRODUCTION

This user’s manual explains connection, conﬁguration, and operation

information speciﬁc to the HC05F6EM Emulator Module (hereafter

referred to as F6EM). The F6EM makes possible emulation and debug-

ging of MC68HC05F6 microcontroller unit (MCU) based target sys-

tems.

The F6EM can be part of two development systems. This chapter

describes those systems and explains the layout of the F6EM.

1.1 DEVELOPMENT SYSTEMS

Your F6EM can be part of two Motorola development tools: the HC05

Motorola Modular Development System (MMDS05) or the

M68HC05EVS Evaluation System (HC05EVS).

1.1.1 Motorola Modular Development System (MMDS05)

The MMDS05 is an emulator system that provides a bus state analyzer

and real-time memory windows. The unit’s integrated design environ-

ment includes an editor, an assembler, user interface, and source-level

debug. A complete MMDS05 consists of:

•a station module -- the metal MMDS05 enclosure, containing the

control board and the internal power supply. Most system cables

connect to the MMDS05 station module. (The cable to an optional

target system, however, runs through an aperture in the station mod-

ule enclosure to connect directly to the emulator module.)

•an emulator module (EM) -- such as the F6EM: a printed circuit

board that enables system functionality for a speciﬁc MCU. The EM

ﬁts into the station module through a sliding panel in the enclosure

top. The EM has connectors for the target cable.

•two logic clip assemblies -- twisted-pair cables that connect the sta-

tion module to your target system, a test ﬁxture, a clock, or any other

circuitry useful for evaluation or analysis. One end of each cable

assembly has a molded connector, which ﬁts into station module pod

A and pod B. Leads at the other end of each cable terminate in

female probe tips. Ball clips come with the cable assemblies.

•a 9-lead RS-232 serial cable -- the cable that connects the station

module to the host computer RS-232 port.

•a 9 to 25-pin adapter -- a moulded assembly that lets you connect

the 9-lead cable to a 25-pin serial port.

•system software -- software, on 3-1/2 inch diskettes.

HC05F6EM USER’S MANUAL

MOTOROLA

1-2

1•MMDS05 documentation -- an MMDS05 operations manual

(MMDS05OM/D) and the appropriate EM user’s manual.

As mentioned, your F6EM gives the MMDS05 the ability to emulate the

MC68HC05F6 MCU. By substituting a different EM, you can enable

your MMDS05 to emulate an MCU of a different series. (Your Motorola

representative can explain all the EMs available.)

Chapter 2 explains how to conﬁgure and use your F6EM as part of an

MMDS05 system. For information about MMDS05 software or the sta-

tion module, see the MMDS05 operations manual. For layout and con-

ﬁguration information pertaining to a different EM, see the

corresponding EM user’s manual.

1.1.2 M68HC05EVS Evaluation System (HC05EVS)

An HC05EVS is an economical, two-board tool for designing, debug-

ging, and evaluating target systems based on an MC68HC05 MCU. A

complete HC05EVS consists of:

•a platform board (PFB) -- the bottom board, which supports the

emulator module. The platform board has connectors for power and

for the terminal or host computer.

•an emulator module (EM) -- such as the F6EM: a printed circuit

board that enables system functionality for a speciﬁc MCU. The EM

ﬁts onto the PFB. The EM has connectors for a target cable and a

cable to a logic analyzer.

•an RS-232 serial cable -- the cable that connects the PFB to the host

computer RS-232 port.

•system software -- software, on 3-1/2 inch diskettes.

•HC05EVS documentation -- an HC05EVS operations manual and

the appropriate EM user’s manual.

As mentioned, your HC05F6 EM emulates the MC68HC05F6 MCU.

By substituting a different EM, you can enable your HC05EVS to emu-

late an MCU of a different series. (Your Motorola representative can

explain all the EMs available.)

Chapter 3 explains how to conﬁgure and use your F6EM as part of an

HC05EVS system. For information about HC05EVS software or the

platform board, see the HC05EVS operations manual. For layout and

conﬁguration information pertaining to a different EM, see the corre-

sponding EM user’s manual.

HC05F6EM USER’S MANUAL MOTOROLA

1-3

1.2 EM LAYOUT

Figure 1-1 shows the layout of the F6EM. Jumper header P4 controls the

path of a target reset. Jump header P6 lets you select the clock-signal

source. Jumper headers P9 and P10 enable you to deﬁne the state of bit

7 (SCS1) and bit 6 (SCS0) in the system option register ($002C) of the

MCU on power up or reset respectively.

Connectors P7 and P8, for a 44-pin QFP, a 64-pin QFP, or a 42-pin S-

DIP cable assembly, (purchased separately from the F6EM.) is the inter-

face to a target system. If you install the F6EM in the MMDS05 station

module, the target cable passes through the slit in the station module

enclosure. Connector P1 connects to a logic analyzer. (Connector P1 has

more signiﬁcance for an EVS system, as an MMDS05 system includes

a bus analyzer.) Expansion header connectors P2 and P3 connect

together the EM and the control board (for an MMDS05) or the EM and

the platform board (for an EVS).

P7 P8

P2 P3

Figure 1-1. HC05F6 Emulator Module

P10

HC05F6EM USER’S MANUAL

MOTOROLA

1-4

11.3 CONNECTOR PIN ASSIGNMENTS (P7AND P8)

Figure 1-2 and 1-3 show the pin assignments for connectors P7 and P8.

For signal descriptions, consult the technical data book for the speciﬁc

MCU.

As connector P1 has more importance to an HC05EVS than to an

MMDS05, pin assignments for connector P1 are in Chapter 3.

To conﬁgure your F6EM for use as part of an MMDS05, follow the

instructions of Chapter 2. To conﬁgure your F6EM as part of an

HC05EVS, follow the instructions of Chapter 3.

PA41

GND

PC0

PC2

EVDD

PC6

TNX

GND

PD4

GND

PB0

PB2

PA0

PA2

GND

PC1

PC3

PC4

PC7

TCAP

PD1

PD5

GND

PD7

PB4

PB6

GND

Figure 1-2. Connector P7 Pin Assignments

PB1

PB3

HC05F6EM USER’S MANUAL MOTOROLA

1-5

PA31

GND

PA5

/IRQ1

GND

PC5

TCMP

PD2

PD6

GND

PB5

PB7

PA1

/IRQ2

GND

TNO

PD0

PD3

/RESET

GND

Figure 1-3. Connector P8 Pin Assignments

HC05F6EM USER’S MANUAL MOTOROLA

2-1

CHAPTER 2 MMDS05 CONFIGURATION AND OPERATION

This chapter explains how to conﬁgure and use your F6EM as part of an

MMDS05. For other parts of system installation or conﬁguration, see

the MMDS05 operations manual (MMDS05OM/D). (If you will use

your F6EM as part of an HC05EVS system, go to Chapter 3 for corre-

sponding information.)

Paragraph 2.1 explains how to set F6EM jumper headers. Paragraph 2.2

explains how to install personality and help ﬁles pertaining to the F6EM.

Paragraph 2.3 explains remaining system installation.

Note that you can conﬁgure an F6EM already installed in the MMDS05

station module enclosure. To do so, switch off station-module power,

remove the hatch, then follow the guidance of this chapter.

CAUTION

Be sure to switch off power if you reconﬁgure an

installed EM. Reconﬁguring EM jumper headers with

power left on can damage MMDS05 circuits.

2.1 SETTING F6EM JUMPER HEADERS

Your F6EM has four jumper headers P4, P6, P9 and P10. Paragraphs

2.1.1.through 2.1.4 explain how to conﬁgure these headers.

2.1.1 Reset Select Header (P4)

Jumper header P4 controls the path of a target reset. The diagram below

shows the factory conﬁguration: the fabricated jumper between pins 1

and 2 enables your software to control resets. This is the only correct P4

conﬁguration for an F6EM that is part of an MMDS05.

EVS

TARGET

FABRICATED

JUMPER

TARGET RESET

DRIVEN FROM

Inhaltsverzeichnis

Andere Motorola Steuereinheit Handbücher

Motorola

Motorola MVME2400 Series Bedienungsanleitung

Motorola

Motorola Canopy Backhaul Module Bedienungsanleitung

Motorola

Motorola G24 Guide Bedienungsanleitung

Motorola

Motorola ACE3600 RTU Bedienungsanleitung

Motorola

Motorola IXP-9120 Bedienungsanleitung

Motorola

Motorola MVME224A Series Bedienungsanleitung

Motorola

Motorola C24 CDMA 1X Bedienungsanleitung

Motorola

Motorola HC05L1 Series Bedienungsanleitung

Motorola

Motorola MVME712-10 Bedienungsanleitung

Motorola

Motorola MVME410 Bedienungsanleitung

Motorola

Motorola DSP56F826EVM Gebrauchsanweisung

Motorola

Motorola MVME2400 Series Kurzanleitung

Motorola

Motorola PRPMC750 Leitfaden

Motorola

Motorola MVME147 Kurzanleitung

Motorola

Motorola MVME123 Bedienungsanleitung

Motorola

Motorola DSP56852 Bedienungsanleitung

Motorola

Motorola M68EM05D32 Bedienungsanleitung

Motorola

Motorola 56F8323 Bedienungsanleitung

Motorola

Motorola Canopy Subscriber Module Bedienungsanleitung

Motorola

Motorola HC05BS8 Bedienungsanleitung

Motorola

Motorola 56F827 Gebrauchsanweisung

Motorola

Motorola WA9901 Montageanleitung

Motorola

Motorola MVME712M Kurzanleitung

Motorola

Motorola MVME760 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung