Motorola Netopia 7107-65 Bedienungsanleitung

User Manual

Motorola Netopia®7107-65

Ethernet Gateway

4-port Ethernet, 802.11b/g Wi-Fi

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS – POWER SUPPLY INSTALLATION.

Connect the power supply cord to

the power jack on the Motorola Gateway. Plug the power supply into an appropriate electrical outlet.

CAUTION:

Depending on the power supply provided with the product, either the direct plug-in power supply blades, power sup-

ply cord plug or the appliance coupler serves as the mains power disconnect. It is important that the direct plug-in power supply,

socket-outlet or appliance coupler be located so it is readily accessible.

(Sweden)

Apparaten skall anslutas till jordat uttag när den ansluts till ett nätverk

(Norway)

Apparatet må kun tilkoples jordet stikkontakt.

TELECOMMUNICATION INSTALLATION.

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of ﬁre, electric shock and injury to persons, including the following:

• Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or

near a swimming pool.

• Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock

from lightning.

• Do not use the telephone to report a gas leak in the vicinity of the leak.

PRODUCT VENTILATION.

The Motorola Device is intended for use in a consumer's home. Ambient temperatures around this

product should not exceed 104°F (40°C). It should not be used in locations exposed to outside heat radiation or trapping of its own

heat. The product should have at least one inch of clearance on all sides except the bottom when properly installed and should not

be placed inside tightly enclosed spaces unless proper ventilation is provided.

SAVE THESE INSTRUCTIONS

Motorola Part Number:

556784-002-00

transformation or adaptation) without written permission from Motorola, Inc.

Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to pro-

vide notiﬁcation of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including, but not lim-

ited to, the implied warranties of merchantability and ﬁtness for a particular purpose. Motorola may make improvements or changes in the product(s)

described in this manual at any time. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Ofﬁce. Microsoft, Windows, Win-

dows Me, and Windows NT are either trademarks or registered trademarks of Microsoft Corporation in the U.S and/or other countries. Macintosh is a reg-

istered trademark of Apple, Inc. Firefox is a registered trademark of the Mozilla Foundation. All other product or service names are the property of their

respective owners.

Safety Information

ENGLISH

Thank you for selecting the Motorola Netopia

7107-65 Wi-Fi Gateway. This guide will help you set up

and conﬁgure your network.

Check your package contents. It should contain the items shown here:

If you don’t have everything, contact your supplier immediately.

Checklist

Motorola Gateway

Power

Supply

1 Yellow RJ-45

Ethernet Cable

1 Gray RJ-45

Ethernet Cable

CD and User Manual

ENGLISH

1. Decide on a location for the Gateway.

Put the Gateway near a power source, near your DSL or cable modem or ﬁber-optic media con-

verter, and in a location where air can circulate freely around it.

2. Power the Gateway.

Connect the power supply to the power jack on the back panel of the Gateway. Then, plug the

power supply into an electrical outlet. Turn on the Power switch.

The

Power

LED should light solid green.

3. Insert the Motorola Netopia

CD into your CDROM drive.

The Motorola Netopia

Installation Guide Wizard automates several tasks to get you up and

running easily. These tasks include making the cable connections and conﬁguring the Gateway.

Run the Wizard on every computer that will connect to your network.

The Installation Guide Wizard will start automati-

cally and the Welcome screen will appear to step

through the process.

Follow the on-screen instructions to make all of

your connections.

Connections

ENGLISH

When all of your connections are made, your network may look like this:

4. Enable Wireless Protected Setup (WPS) on your Wi-Fi devices.

Adding wireless clients to your network is easier using Wireless Protected Setup (WPS). Older,

non-WPS clients can still be added to the network by conﬁguring them the standard way with

WPA-PSK.

Make sure your wireless clients are running. Press the WPS push-button to begin the exchange,

which may last up to two minutes.

Do not power off your Gateway during the exchange.

The Gateway will display a success message when the exchange has completed.

Note:

Not all client wireless devices support WPS. Refer to their documentation.

DC Power

Rear View

Ethernet

Ports

Power Switch

Broadband Port

Cable Modem,

DSL Modem, or

Fiber-optic media converter

USB

Port

(not used)

ENGLISH

When all of your connections are made, the status LEDs on the front of your Motorola Netopia

Gate-

way will light, according to the following diagram:

LED Action

POWER

Green

when power is on.

Red

if device malfunctions. Flashes

Red

when

new embedded software is being installed.

ETHERNET 1, 2, 3, 4

Solid

green

when connected. Flash

green

when there is activity on the LAN.

USB

Not currently used.

BROADBAND

Off when not connected to a modem; solid

green

when a broadband device

is detected; ﬂashing

green

when receiving or transmitting data.

WIRELESS

Flashes

green

when there is activity on the wireless LAN. Off if driver fails

to initialize, or if wireless is disabled.

INTERNET

Solid

green

when Gateway is connected. Flashes

green

when transmitting

or receiving data on the WAN port.

POWER

ETHERNET 1, 2, 3, 4

Front View

BROADBAND WIRELESS

INTERNET

USB

ENGLISH

You can access the conﬁguration pages at any time as follows:

1. Run a Web browser, such as Firefox, Safari, or Microsoft Internet Explorer, and

enter

http://192.168.1.254

in the URL Address text box.

Press Return.

2. Select your language from the pull-down menu and click

Device Conﬁguration

ChoIces in the Americas are: Choices in Europe are:

English English

Español Latinoamericano Français

Portugués do Brasil Deutsch

Italiano

ENGLISH

3. For security purposes you must create a password for your Gateway. Enter a new

password, repeat it, and click the

button.

You will be asked to log in

to your Gateway with a

UserName and Password.

The default UserName is

admin

. Enter the Password

you just created. Type these

in their respective ﬁelds and

click the

button.

Congratulations!

Your connection is up and running and you should be able to browse the Inter-

net by typing a URL address in your browser’s Address text box or by selecting any of your favor-

ite bookmarks.

Should you require additional information, page 12 of this Guide contains Frequently Asked Questions

(and Answers) and Basic Troubleshooting tips. The latest

Administrator’s Handbook

with advanced con-

ﬁguration instructions is also available on-line at:

http://www.motorola.com/us/products.jsp

ENGLISH

Your Gateway serves Dynamically-assigned IP addresses by default. Be sure to conﬁgure each com-

puter connected to your Gateway to accept a Dynamically-assigned IP address, commonly referred to

as DHCP.

Microsoft Windows:

Step 1. Navigate to the

TCP/IP Properties

Control Panel.

a. Windows 98, 2000, and ME versions follow a path like this:

Start

menu ->

Settings

Control Panel

Network

(or

Network and

Dial-up Connections

Local Area Connection

Properties

) ->

TCP/IP [your_network_card]

Internet Protocol [TCP/IP]

Prop-

erties

b. Windows XP follows a path like this:

Start

menu ->

Control Panel

Network and Internet Connections

Network Connections

Local Area Connection

Properties

Internet Protocol [TCP/IP]

Properties

Step 2. Select

Obtain an IP address automatically

Step 3. Select

Obtain DNS server address automatically

, if available.

Step 4. Remove any previously conﬁgured Gateways, if available.

Step 5. OK the settings. Restart if prompted.

Client Conﬁguration

ENGLISH

c. Windows Vista is set to obtain an IP address automatically by default. You may not need to conﬁgure

it at all.

To check, open the

Networking

Control Panel and select

Internet Protocol Version 4 (TCP/IPv4)

Click the

Properties

button.

The

Internet Protocol Version 4

(TCP/IPv4) Properties

window

should appear as shown.

If not, select the radio buttons shown

above, and click the

button.

Inhaltsverzeichnis

Andere Motorola Tor Handbücher

Motorola

Motorola Netopia 2247-N8 Bedienungsanleitung

Motorola

Motorola SURFboard eXtreme SBG6782-AC Bedienungsanleitung

Motorola

Motorola SURFboard SVG2501 Bedienungsanleitung

Motorola

Motorola HH1620 Bedienungsanleitung

Motorola

Motorola SURFboard SVG7782 Bedienungsanleitung

Motorola

Motorola SURFboard SVG2500 Bedienungsanleitung

Motorola

Motorola Netopia 3347-02 Bedienungsanleitung

Motorola

Motorola NETOPIA 2210-02 Bedienungsanleitung

Motorola

Motorola SVG2500 SURFBOARD DIGITAL VOICE WIRELESS GATEWAY - annexe... Schulungshandbuch

Motorola

Motorola VT2442 - VONAGE Bedienungsanleitung

Motorola

Motorola SURFboard SVG1202 Bedienungsanleitung

Motorola

Motorola HMUG1080 Bedienungsanleitung

Motorola

Motorola 4home Bedienungsanleitung

Motorola

Motorola CG4500 Bedienungsanleitung

Motorola

Motorola Netopia 2247-N8 Bedienungsanleitung

Motorola

Motorola SURFBOARD SBG1000 Bedienungsanleitung

Motorola

Motorola SURFBoard SBG6782 Bedienungsanleitung

Motorola

Motorola 2247-62-10NA - Netopia 2247-62 Wireless... Bedienungsanleitung

Motorola

Motorola Netopia 2241N-VGx Bedienungsanleitung

Motorola

Motorola SURFboard SVG6582 Bedienungsanleitung

Motorola

Motorola BLADE series Bedienungsanleitung

Motorola

Motorola Netopia Bedienungsanleitung

Motorola

Motorola Vonage VT2142 Bedienungsanleitung

Motorola

Motorola NVG510 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung