Motorola H500 Bedienungsanleitung
1 - CHARGE
2 - START
BLUETOOTH
FEATURE
3 - PAIR
4 - TEST AND USE
Get Connected in
4 Quick Steps
H500
Bluetooth®
Handsfree Headset
Start Here > > >
BEFORE YOU
BEGIN
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
Earhook
Take a moment before you get started to
familiarize yourself with your new
H500 Handsfree Headset.
Volume
Buttons
Blue
Indicator
Light
Call Button
Microphone
1
Charge your headset's battery for 2 hours:
Plug the Motorola charger into the end of
the headset.
The blue indicator light turns on when the
battery is charging. It may take up to 1
minute for the light to turn on. When the
headset's battery is fully charged (about 2
hours), the blue indicator light turns off.
Unplug the charger from the headset.
1
2
CHARGE
Your Headset's Battery
Note: Headset is not functional while charging.
START BLUETOOTH
Feature
On Your Phone
2
Select (Menu)> Settings > Connection >
Bluetooth Link > Setup.
Scroll to Power.
Press Change.
Scroll to On.
Press Select to turn on the Bluetooth
feature. Bluetooth feature remains on until
you turn it off.
1
2
3
4
5
M
Your phone's Bluetooth feature is off by
default. To use your headset, turn on the
Bluetooth feature in your phone.
For most Motorola phones:
Note: These steps are for most Motorola phones. For
other phones, see your phone's user's guide.
TROUBLESHOOTING
My phone does not find my headset.
Make sure the blue light on your headset is
steadily lit when your phone is searching for
devices (see step 3).
My headset worked before but now it's
not working.
Make sure your phone is on and the
Bluetooth feature is turned on in your phone
(see step 2). If the Bluetooth feature has
been turned off or was turned on only
temporarily, you may need to restart the
Bluetooth feature (see step 2). If you have
confirmed the Bluetooth feature is on in your
phone, pair your phone and headset again
(see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2006.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809494A56-C
PAIR
Your Headset
3
Call Button
With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit. (The light will flash while you
hold the Call button.)
If the indicator light is flashing or does not
remain steadily lit, turn off the headset and
repeat step 1.
1
2
Before you can use your headset, you must
pair (link) it with your phone.
Step A - PUT HEADSET IN PAIRING MODE
Blue Indicator Light
Note: To turn off headset, see "Turning On and Off" on the
reverse side of this guide.
PAIR
Your Phone
Select (Menu)> Settings > Connection >
Bluetooth Link > Handsfree > Look for Devices.
The phone lists all Bluetooth devices it finds.
Select Motorola H500.
Press OK or Yes to pair (link) the handsfree
device.
Enter the passkey 0000 and press OK.
Note: Passkey cannot be changed
from 0000.
Step B - SET THE PHONE TO LOOK FOR
YOUR HEADSET
3
4
1
2
M
When your headset is successfully paired with
your phone, the blue indicator light changes
from steadily lit to flashing.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
For most Motorola phones:
Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:
TEST AND USE
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
On your phone, dial the number you want
to call and press the Send key.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
4
1
2
3
After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.
USING YOUR H500
See Features and Functions Guide
on the reverse side
of this guide
for information on
using your H500.
Andere Handbücher für H500
3
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Motorola Headset Handbücher
Motorola
Motorola HK250 Bedienungsanleitung
Motorola
Motorola H720 Bedienungsanleitung
Motorola
Motorola NMN6050B Bedienungsanleitung
Motorola
Motorola HS801 Bedienungsanleitung
Motorola
Motorola H620 - Headset - Over-the-ear Bedienungsanleitung
Motorola
Motorola H680 - Headset - Over-the-ear Bedienungsanleitung
Motorola
Motorola CD2HD Bedienungsanleitung
Motorola
Motorola H680 - Headset - Over-the-ear Bedienungsanleitung
Motorola
Motorola HS805 Bedienungsanleitung
Motorola
Motorola Motopure H15 - H15 Noise-Canceling Bluetooth Wireless... Kurzanleitung
Motorola
Motorola HK500 Bedienungsanleitung
Motorola
Motorola Miniblue H5 Bedienungsanleitung
Motorola
Motorola H220 Stücklistenhandbuch
Motorola
Motorola S11 FLEX HD Bedienungsanleitung
Motorola
Motorola PMLN5277 Bedienungsanleitung
Motorola
Motorola HK250 Bedienungsanleitung
Motorola
Motorola HX520 Bedienungsanleitung
Motorola
Motorola 89425P Bedienungsanleitung
Motorola
Motorola AARMN4019 Bedienungsanleitung
Motorola
Motorola HS830 - Wireless Pendant Headset Bedienungsanleitung
