Motorola OASIS Bedienungsanleitung
Quick Start Guide
MOTOROLA OASIS™
1Congratulations
Congratulations
Your MOTOROLA OASIS™ headset is designed for
quick connections, clear calls, and lasting comfort.
Some other cool features:
•Simultaneously connect with two phones.
•Use voice prompts to guide you on connections,
battery level, and other functions.
We’ve crammed all of the main features of your
headset into this handy guide, and in a matter of
minutes we’ll show you just how easy your headset is
to use.
So go on, check it out.
more information
on the Web: www.motorola.com/support
Caution: Before using your headset for the first
time, please read the important Safety, Regulatory
& Legal information at the back of this guide (page
16).
2Your headset
Yo u r h e a d s e t
the important parts
Micro USB
Charging
Connector
Volume Up
Button
Mute
Button
Power Switch and
Status Light
Speaker
Call
Button
Microphones
Boom
Volume Down
Button
3Charge it
Charge it
let’s get you up and running
While your headset is charging, you won’t be able to
use it.
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling
facility. Any attempt to remove or replace your battery
will damage your headset.
Status Light
Red/Yellow = charging
Green = fully charged
4Basics
Basics
a few essentials to get you started
Turn it on & off
Wear it
1Rotate the boom to the
open position and the
speaker to the right or left
(depending on which you
ear you use).
2Loop it over your ear
(ensure main housing is
behind your ear and the
boom points towards your
mouth).
Tip: Try out all the supplied ear cushions to get a
comfortable fit and optimal performance.
On
Off
5Basics
Store it
Rotate the boom (1) and speaker (2) as shown to the
closed position.
Note: Only rotate the boom in the direction shown. It
will not rotate in the other direction.
1
2
storing
position
6Pair & connect
Pair & connect
connect and go
Note: The voice prompts are only in English.
Pair & connect with your phone
1Turn off any Bluetooth® devices previously paired
with your headset.
2Turn on the Bluetooth feature on your phone.
3Put the headset on your ear (see “Wear it” on
page 4).
4Turn on your headset (see “Turn it on & off” on
page 4).
The status light becomes steadily lit in blue and you
hear “ready to pair”.
5Follow the voice prompts to connect your phone to
your headset.
Note: When prompted for the passkey, enter 0000.
When your headset successfully pairs with your
phone, you hear “pairing complete”.
For daily use, make sure your headset is turned on,
and your phone’s Bluetooth feature is on. Your headset
and phone will connect automatically.
7Pair & connect
Pair & connect a second phone
1Turn off first phone and any other Bluetooth devices
previously paired with your headset.
2Turn your headset off (see “Turn it on & off” on
page 4).
3Put the headset on your ear.
4Turn on the Bluetooth feature on your phone.
5Turn on your headset.
The status light becomes steadily lit in blue and you
hear “ready to pair”.
6Follow the voice prompts to connect your phone to
your headset.
Note: When prompted for the passkey, enter 0000.
When your headset successfully pairs with your
phone, you hear “pairing complete”.
To connect to both phones, turn on the first phone
while the second phone is connected. When you hear
“phone 2 connected”,your headset is connected to
both phones.
Test your connection
1Place the headset on your ear.
2On your phone, dial a phone number and press the
Call/Send key.
If your phone and headset are successfully connected,
you hear ringing on the headset.
8Calls
Calls
it’s good to talk
Note: Some features are phone/network dependent.
Note: The voice prompts are only in English.
To...
answer call Press the Call button.
reject call Press and hold a Volume button
until you hear a tone
make a voice
dial call
Press the Call button and you hear
a tone.
redial last call Press and hold the Call button until
you hear a tone.
mute or
unmute a call
Press the Mute button and you
hear “mute on” or “mute off”.
end a call Press the Call button.
answer
second
incoming call
Press the Call button.
reject second
incoming call
Press and hold a Volume button
until you hear a tone.
Inhaltsverzeichnis
Sprachen:
Andere Motorola Headset Handbücher
Motorola
Motorola MDJMMN4066 Bedienungsanleitung
Motorola
Motorola SF600 Bedienungsanleitung
Motorola
Motorola H550 Bedienungsanleitung
Motorola
Motorola H730 Bedienungsanleitung
Motorola
Motorola PMLN7269 Bedienungsanleitung
Motorola
Motorola MOTOPURE H15 Bedienungsanleitung
Motorola
Motorola HK255 Bedienungsanleitung
Motorola
Motorola S305 - MOTOROKR - Headset Stücklistenhandbuch
Motorola
Motorola S11-HD Bedienungsanleitung
Motorola
Motorola Moto Hint Bedienungsanleitung
Motorola
Motorola PMLN8083 Bedienungsanleitung
Motorola
Motorola H520 Bedienungsanleitung
Motorola
Motorola QG-HS801 Bedienungsanleitung
Motorola
Motorola NMN6050B Bedienungsanleitung
Motorola
Motorola Command One Bedienungsanleitung
Motorola
Motorola H710 - Headset - Over-the-ear Bedienungsanleitung
Motorola
Motorola MOTOROKR S7-HD Bedienungsanleitung
Motorola
Motorola HK250 Bedienungsanleitung
Motorola
Motorola H690 Bedienungsanleitung
Motorola
Motorola HK255-S Bedienungsanleitung
