Motorola M68MPBF333 Bedienungsanleitung

M68MPB333UM/D

REV 1

March 1998

M68MPBF333

MCU PERSONALITY BOARD

USER’S MANUAL

Motorola reserves the right to make changes without further notice to any products herein to

improve reliability, function or design. Motorola does not assume any liability arising out of the

application or use of any product or circuit described herein; neither does it convey any license

under its patent rights nor the rights of others. Motorola products are not designed, intended, or

authorized for use as components in systems intended for surgical implant into the body, or other

applications intended to support or sustain life, or for any other application in which the failure of

the Motorola product could create a situation where personal injury or death may occur. Should

Buyer purchase or use Motorola products for any such unintended or unauthorized application,

Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and

distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney

fees arising out of, directly or indirectly, any claim of personal injury or death associated with

such unintended or unauthorized use, even if such claim alleges that Motorola was negligent

regarding the design or manufacture of the part.

Motorola and the Motorola logo are registered trademarks of Motorola Inc.SDI is a trademark of

Motorola Inc.

Motorola Inc. is an Equal Opportunity/Affirmative Action Employer.

CONTENTS

M68MPB333UM/D iii

CONTENTS

CHAPTER 1 GENERAL INFORMATION

1.1 INTRODUCTION............................................................................................................. 1-1

1.2 SPECIFICATIONS........................................................................................................... 1-2

1.3 EQUIPMENT REQUIRED............................................................................................... 1-2

1.4 CUSTOMER SUPPORT .................................................................................................. 1-3

CHAPTER 2 HARDWARE PREPARATION AND INSTALLATION

2.1 INTRODUCTION............................................................................................................. 2-1

2.2 HARDWARE PREPARATION....................................................................................... 2-1

2.2.1 Clock Select Header (W1)......................................................................................... 2-5

2.2.2 VDDA Select Header (W2)....................................................................................... 2-6

2.2.3 Voltage Reference High Select Header (W3)............................................................ 2-7

2.2.4 Voltage Reference Low Select Header (W4)............................................................. 2-8

2.2.5 VSSA Insertion Point (E1) ........................................................................................ 2-8

2.3 MEVB CONFIGURATION............................................................................................ 2-10

2.4 ACTIVE PROBE CONFIGURATION........................................................................... 2-12

CHAPTER 3 MEVB QUICK START GUIDE

3.1 INTRODUCTION............................................................................................................. 3-1

3.2 CONFIGURING THE MPFB........................................................................................... 3-1

3.2.1 MPFB Memory Devices............................................................................................ 3-1

3.2.2 MPFB Jumper Headers.............................................................................................. 3-2

3.3 MEVB INSTALLATION INSTRUCTIONS.................................................................... 3-3

3.3.1 Power Supply – MPFB Connection........................................................................... 3-3

3.3.2 Personal Computer – BDM Connection.................................................................... 3-5

3.4 SOFTWARE INSTALLATION AND MCU INITIALIZATION.................................... 3-5

CHAPTER 4 MEVB SUPPORT INFORMATION

4.1 INTRODUCTION............................................................................................................. 4-1

4.2 LOGIC ANALYZER CONNECTOR SIGNALS............................................................. 4-1

CONTENTS

iv M68MPB333UM/D

CHAPTER 5 MAPI SUPPORT INFORMATION

5.1 INTRODUCTION............................................................................................................. 5-1

5.2 MAPI BUS CONNECTORS ............................................................................................ 5-1

CHAPTER 6 SCHEMATIC DIAGRAMS

6.1 INTRODUCTION............................................................................................................. 6-1

FIGURES

2-1. M68MPBF333 (B version) Parts Location Diagram (top view)....................................... 2-3

2-2. M68MPBF333 (C version) Parts Location Diagram (top view)....................................... 2-3

2-3. MPB – MPFB Interconnection (with SDI Interface)....................................................... 2-11

2-4. Active Probe Interconnection (with Active Probe Box)................................................. 2-14

3-1. MPFB Power Supply Connector....................................................................................... 3-4

5-1. MAPI Interface Connector Layout.................................................................................... 5-1

5-2. MAPI Interface Connector P1 Pin Assignments............................................................... 5-2

5-3. MAPI Interface Connector P2 Pin Assignments............................................................... 5-3

5-4. MAPI Interface Connector P3 Pin Assignments............................................................... 5-4

5-5. MAPI Interface Connector P4 Pin Assignments............................................................... 5-5

TABLES

1-1. MPB Specifications........................................................................................................... 1-2

2-1. Jumper Header Types........................................................................................................ 2-4

2-2. MPB Jumper Header Descriptions.................................................................................... 2-4

3-1. MPFB Quick Start Jumper Header Configuration............................................................ 3-2

4-1. Logic Analyzer Connector J7 Pin Assignments................................................................ 4-2

4-2. Logic Analyzer Connector J8 Pin Assignments................................................................ 4-2

4-3. Logic Analyzer Connector J9 Pin Assignments................................................................ 4-3

4-4. Logic Analyzer Connector J10 Pin Assignments.............................................................. 4-3

4-5. Logic Analyzer Connector J11 Pin Assignments.............................................................. 4-4

4-6. Logic Analyzer Connector J12 Pin Assignments.............................................................. 4-4

4-7. Logic Analyzer Connector J13 Pin Assignments.............................................................. 4-6

4-8. Logic Analyzer Connector J14 Pin Assignments.............................................................. 4-8

4-9. Logic Analyzer Connector J15 Pin Assignments.............................................................. 4-9

4-10. Logic Analyzer Connector J16 Pin Assignments.............................................................. 4-9

CONTENTS

M68MPB333UM/D v

TABLES (continued)

4-11. Logic Analyzer Connector J17 Pin Assignments.............................................................. 4-9

4-12. Logic Analyzer Connector J18 Pin Assignments............................................................ 4-10

4-13. Logic Analyzer Connector J19 Pin Assignments............................................................ 4-11

4-14. Logic Analyzer Connector J20 Pin Assignments............................................................ 4-11

CONTENTS

vi M68MPB333UM/D

GENERAL INFORMATION

M68MPB333UM/D 1-1

CHAPTER 1

GENERAL INFORMATION

1.1 INTRODUCTION

This manual provides general information, hardware preparation, installation

instructions, a quick start guide, and support information for the M68MPBF333

MCU Personality Board (MPB). The MPB is one component of Motorola’s

modular approach to MC68F333 Microcontroller Unit-based product

development. This modular approach lets you easily configure our development

systems to fit your requirements.

The MPB may be used in either the MMDS1632 Motorola Modular Development

System (MMDS) or the modular evaluation board (MEVB). The MEVB consists

of the M68MPFB Modular Platform Board (MPFB) and an MPB. Alternately, you

may install the MPB directly in your target system if the target system includes a

modular active probe interconnect (MAPI) interface. The MCU device on the

MPB defines which MCU is emulated/evaluated by the MMDS or evaluated by

the MEVB. Both systems are invaluable tools for designing, debugging, and

evaluating MCU operation of the M68HC12, M68HC16, and M68300 MCU

families. By providing the essential MCU timing and I/O circuitry, these systems

simplify user evaluation of prototype hardware/software products.

The MPB includes:

• M68MPBF333 MCU Personality Board (MPB)

• Plastic overlay for use with the MEVB – pin outs for the logic analyzer

connectors on the MPFB (specifically for the MC68F333 MCU)

• Documentation (this manual)

GENERAL INFORMATION

1-2 M68MPB333UM/D

1.2 SPECIFICATIONS

Table 1-1 lists MPB specifications.

Table 1-1. MPB Specifications

Characteristic Specifications

On-Board Clock Case style: 14- or 8-pin hybrid crystal clock oscillator

(frequency as required by MCU).

External Clock 32 KHz – 16.78 MHz (or maximum MCU allows).

MCU I/O ports HCMOS compatible

Temperature

Operating

Storage 0° to +40° C

-40° to +85° C

Relative humidity 0 to 90% (non-condensing)

Power requirements +5Vdc ± 5% @ 500 mA (max.)

Dimensions

MCU Personality Board 3.25 x 3.25 in. (82.6 x 82.6 mm)

1.3 EQUIPMENT REQUIRED

The external requirements for MPB operation are either an MPFB or MMDS

system. For MMDS operation requirements, see the MMDS1632 Motorola

Modular Development System User’s Manual,MMDS1632UM/D. For operation

requirements for the MEVB, see this manual and the M68MPFB Modular

Platform Board User’s Manual,M68MPFBUM/D.

GENERAL INFORMATION

M68MPB333UM/D 1-3

1.4 CUSTOMER SUPPORT

For information about a Motorola distributor or sales office near you call:

AUSTRALIA, Melbourne – (61-3)887-0711

Sydney – 61(2)906-3855

BRAZIL, Sao Paulo – 55(11)815-4200

CANADA, B. C., Vancouver – (604)606-8502

ONTARIO, Toronto – (416)497-8181

ONTARIO, Ottawa – (613)226-3491

QUEBEC, Montreal – (514)333-3300

CHINA, Beijing – 86-10-68437222

DENMARK – (45)43488393

FINLAND, Helsinki – 358-9-6824-400

FRANCE, Paris – 33134 635900

GERMANY,

Langenhagen/Hannover – 49(511)786880

Munich – 49 89 92103-0

Nuremberg – 49 911 96-3190

Sindelfingen – 49 7031 79 710

Wiesbaden – 49 611 973050

HONG KONG, Kwai Fong – 852-6106888

Tai Po – 852-6668333

INDIA, Bangalore – (91-80)5598615

ISRAEL, Herzlia – 972-9-590222

ITALY, Milan – 39(2)82201

JAPAN, Fukuoka – 81-92-725-7583

Gotanda – 81-3-5487-8311

Nagoya – 81-52-232-3500

Osaka – 81-6-305-1802

Sendai – 81-22-268-4333

Takamatsu – 81-878-37-9972

Tokyo – 81-3-3440-3311

KOREA, Pusan – 82(51)4635-035

Seoul – 82(2)554-5118

MALAYSIA, Penang – 60(4)2282514

MEXICO, Mexico City – 52(5)282-0230

Guadalajara – 52(36)21-8977

PUERTO RICO, San Juan – (809)282-2300

SINGAPORE – (65)4818188

SPAIN, Madrid – 34(1)457-8204

SWEDEN, Solna – 46(8)734-8800

SWITZERLAND, Geneva – 41(22)799 11 11

Zurich – 41(1)730-4074

TAIWAN, Taipei – 886(2)717-7089

THAILAND, Bangkok – 66(2)254-4910

UNITED KINGDOM, Aylesbury – 441(296)395-252

UNITED STATES, Phoenix, AZ – 1-800-441-2447

For a list of the Motorola sales offices and distributors:

http://www.mcu.motsps.com/sale_off.html

GENERAL INFORMATION

1-4 M68MPB333UM/D

Inhaltsverzeichnis

Andere Motorola Mikrocontroller Handbücher

Motorola

Motorola M68HC08 Bedienungsanleitung

Motorola

Motorola AT Commands G24-L Handbuch

Motorola

Motorola Freescale Semiconductor M-Core MMC2001 Bedienungsanleitung

Motorola

Motorola MPC533 Bedienungsanleitung

Motorola

Motorola MC68HC05T16 Gebrauchsanweisung

Motorola

Motorola G24 Guide Bedienungsanleitung

Motorola

Motorola ColdFire MCF5281 Bedienungsanleitung

Motorola

Motorola MC9S12DT256 Bedienungsanleitung

Motorola

Motorola DSP56824ADM Bedienungsanleitung

Motorola

Motorola M-CORE MMC2001 Series Bedienungsanleitung

Motorola

Motorola F3030A Bedienungsanleitung

Motorola

Motorola MCU M68MPB916R3 Bedienungsanleitung

Motorola

Motorola M68HC08 Bedienungsanleitung

Motorola

Motorola MPC860 PowerQUICC Bedienungsanleitung

Motorola

Motorola M68MPB334 Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Bedienungsanleitung