Motorola Advisor Graphix CP1250 Bedienungsanleitung
A
USER’S GUIDE
1033B60o.book Page -1 Thursday, August 5, 1999 4:41 PM
Table of Contents
Introduction......................................... 1
Getting Started
Installing/Replacing the Battery............. 2
Control Buttons and Status Screen....... 3
Turning Your Pager On.......................... 4
Turning Your Pager Off.......................... 5
Backlight................................................ 5
Sending a Test Message....................... 5
The Function Menu ............................... 6
Setting Up
Setting the Time and Date..................... 7
Setting the Pager Alert Mode................ 8
Setting the Pager Alert Pattern ............. 8
Setting the Pager Alarm........................ 9
Quiet Time........................................... 11
Personal Messages
Receiving/Reading a Personal
Message........................................ 13
Maildrop Messages
Receiving/Reading Maildrop
Messages ...................................... 16
Setting the Alert for a Specific
Maildrop......................................... 20
Super Maildrop Messages
Receiving/Reading Super
Maildrop Messages........................ 22
Turning the Alert for a Super
Maildrop On and Off ...................... 26
Turning the Alert for a Specific
Topic On and Off ........................... 26
Advanced Messaging
Quickview Folder and Quickview........ 28
Breaking the Topic/Quickview
or Quickview Folder Relationship.. 31
Price Alert ........................................... 32
Search String ...................................... 33
Price Charts........................................ 34
Other Graphics ....................................36
Folders
Moving Messages to Folders.............. 38
Reading Messages in Folders ............ 39
Moving Messages Between Folders... 40
Moving All Personal Messages
to the Trash ................................... 42
Deleting Messages from the
Pager (Emptying the Trash) .......... 43
Completing Your Tasks in the
Task Folder.................................... 44
Setting Reminder Alarms for
Events (the Event List).................. 46
Changing the Reminder Alarm
(in the Event List) .......................... 48
Features ............................................ 51
Use and Care..................................... 53
1033B60o.book Page 0 Thursday, August 5, 1999 4:41 PM
1
Congratulations on purchasing your Motorola®CP1250/AdvisorTM Graphix
pager. This product may be referred to as either a CP1250 pager or an
AdvisorTM Graphix pager, depending on the region where you purchased it.
This new and exciting, eight-line word-messaging display pager integrates
messaging with features such as emergency call, phone list, display zoom, and
event reminder/calendar. Advanced information services (FLEXTM Information
Service Protocol) provide simple yet powerful tools for displaying a variety of
information, such as stock updates, sports scores, and late-breaking news.
Check with your service provider to determine if the following messaging
services are available in your region: price alerts, search string, price charts,
other graphics, and emergency call.
Full understanding of what this exciting product offers begins with reading
this user’s guide. It provides helpful suggestions for both the first-time user as
well as the experienced user.
A detachable quick reference card is included on the back cover for
your convenience.
This pager can receive three different types of messages depending on the
features available in your pager: personal (D), maildrop (K), and super
maildrop (I). Detailed information about these message types as well as
instructions on how to use them is provided later in this guide.
INTRODUCTION
1033B60o.book Page 1 Thursday, August 5, 1999 4:41 PM
2
Battery Information
Your CP1250/AdvisorTM Graphix pager operates with one AAA-size alkaline
battery.
Note: Installing the battery incorrectly could result in resetting the alert
mode and time to their default settings, and all messages could be deleted.
Installing/Replacing the Battery
Turnthe pageroff andplace thepagerwith
the display side down as shown.
Unlock the battery door by sliding the
door lock away from the battery door.
Slide the battery door in the direction of
thearrowindication onthebattery door.
Lift the battery door away from the housing to remove it.
Lift the battery out of the battery compartment, noting the positive (+) and
negative (-) markings on both the battery and the pager housing.
Insert the new battery. Make sure you match the positive and negative
markings on the battery with those on the pager housing.
GETTING STARTED
1033B60o.book Page 2 Thursday, August 5, 1999 4:41 PM
3
Align the grooves on the battery door with the grooves on the pager housing
and slide the battery door closed.
Slide the battery door lock toward the bottom of the pager to lock the
battery door.
Control Buttons and Status Screen
uOn/Read Used to turn the pager on and to read a message.
tFunction/Select Used to display the Function menu and to select
pager settings.
vw
x
s
Directional Used to move around the display and through
menus.
Button
On/Read
Function/Select
Button
Directional
HY L›):)) m)%/)!
DDDD
Buttons
Pager
Status
Folders Rqhaob
ESCAPE
eijmkezBqqhaob
IbIIIIIILI55555555
GETTING STARTED
1033B60o.book Page 3 Thursday, August 5, 1999 4:41 PM
4
Turning Your Pager On
Press uto turn your pager on. A start-up message is momentarily
displayed and your pager activates the currently selected alert.
Press any button to stop the start-up alert.While the pager is on and no
activity is taking place, the Status screen is displayed.
HY L› ):)) m)%/)!
(Blank screen)
Status Screen example
Alert
Mode
(Audible)
Power
On
Battery status
(Full) Time Day and Date
GETTING STARTED
1033B60o.book Page 4 Thursday, August 5, 1999 4:41 PM
5
Turning Your Pager Off
From any screen, press and release tuntil ESCAPE is displayed. (zis
flashing.)
Press vto move to e(TURN OFF).
Press tto turn the pager off. The TURN OFF? prompt is displayed.
Press tagain. The pager is now off and the screen is blank.
Backlight
Your pager’s display can be illuminated in low light conditions. You can
manually turn the backlight on and off by pressing and holding tfor at least
two seconds.
Sending a Test Message
After you have read this guide and your pager has been activated by your
service provider, send yourself a test message. If you have any problems
sending or receiving your test message, contact your service provider.
GETTING STARTED
1033B60o.book Page 5 Thursday, August 5, 1999 4:41 PM
6
The Function Menu
The Function menu provides access to many of the pager’s features through a
series of icons and prompts. Press tto access the Function menu. An
example is shown below.
Note: Some icons may or may not be displayed on your pager, depending on
your pager’s features and whether or not it has messages.
Getting Around the Function Menu
Press either vor sto move within the Function menu.
Note: To exit from any menu without accepting changes, press u.
Folders
Function prompt
Functions
Rqhaob
ESCAPE
eijmkezBqhaobK
Function Menu example
GETTING STARTED
1033B60o.book Page 6 Thursday, August 5, 1999 4:41 PM
7
Setting the Time and Date
On the Function menu, press vor sto move to i(SET TIME/ALARM).
Press t. The Set Time screen is displayed.
Press sto move to the hour field.
Press xor wto adjust the hour.
Press sto move to the first digit of the minutes field.
Press xor wto adjust the first digit of the minutes.
Repeat Steps 5 and 6 to adjust the second digit of the minutes field, the
method of time measurement (-,"or |), month, date, and year fields.
Press tto accept the time and date changes.
Pager status
Set Time
fields
HY L› ):)) S)!/)!
H_ 00:00| 01/01/00H
J00:00| --/--/--
SET TIME
Set Time Screen example
SETTING UP
1033B60o.book Page 7 Thursday, August 5, 1999 4:41 PM
8
Setting the Pager Alert Mode
The alert can be set as either audible or silent.
On the Function menu, press vuntil one of two possible prompts is
displayed: SET SILENT ALERT ([k] to change from audible to silent alert mode) or
SET AUDIBLE ALERT ([f] to change from silent to audible alert mode).
Press tto accept the new alert mode. The pager emits a sample of the new
alert.
Setting the Pager Alert Pattern
The pager must be set for an audible alert to select an alert pattern. There are
ten alert pattern options: one standard alert (1), seven different pleasing alerts
(2through 8), a chirp alert (O),andnoalert(k).
On the Function menu, press sto move to e(CHOOSE ALERT).
Press t. The Alert pattern screen is displayed.
12345678 O k
STANDARD ALERT
Alert Pattern Screen example
SETTING UP
1033B60o.book Page 8 Thursday, August 5, 1999 4:41 PM
Andere Handbücher für Advisor Graphix CP1250
2
Inhaltsverzeichnis
Andere Motorola Pager Handbücher
Motorola
Motorola PAGE WRITER 2000X Bedienungsanleitung
Motorola
Motorola Advisor II Bedienungsanleitung
Motorola
Motorola Gold FLX 6881024B55-A Bedienungsanleitung
Motorola
Motorola LS355 Bedienungsanleitung
Motorola
Motorola TimePort PF1500 Bedienungsanleitung
Motorola
Motorola Timeport P930 Series Bedienungsanleitung
Motorola
Motorola LS750 Bedienungsanleitung
Motorola
Motorola PAGE WRITER 2000X Bedienungsanleitung
Motorola
Motorola MINITOR IV Betriebsanleitung
Motorola
Motorola ADVISOR ELITE Bedienungsanleitung
Motorola
Motorola RSVP RSVP Numeric Display Pager for Micro-TAC Cell... Bedienungsanleitung
Motorola
Motorola BRAVO FLX Bedienungsanleitung
Motorola
Motorola LS750 Bedienungsanleitung
Motorola
Motorola LS355 Bedienungsanleitung
Motorola
Motorola TalkAbout T350 Bedienungsanleitung
Motorola
Motorola Advisor TPG2200 Bedienungsanleitung
Motorola
Motorola BRAVO LX Bedienungsanleitung
Motorola
Motorola PageOne Scriptor F Bedienungsanleitung
Motorola
Motorola ADVISOR Bedienungsanleitung
Motorola
Motorola LX2 plus Bedienungsanleitung
