Motorola APX 8000XE Referenzhandbuch

English

ASTRO®APX™ 8000XE Series

Digital Portable Radios

Quick Reference Card

RF Energy Exposure and Product Safety

Guide for Portable Two-Way Radios

ATTENTION!

This radio is restricted to Occupational use only. Before using

the radio, read the RF Energy Exposure and Product Safety

Guide for Portable Two-Way Radios which contains important

operating instructions for safe usage and RF energy awareness

and control for Compliance with applicable standards and

Regulations.

Radio Controls

Radio On/Off

Zones and Channels

Receiving and Transmitting

Sending an Emergency Alarm

* Default timer of Emergency button press to

activate Emergency is 50 milliseconds. This

timer is programmable, see Emergency

Operation in the user guide for details.

To exit emergency at any time, press and hold

the Emergency button.

•On – On/Off/Volume knob clockwise.

Top (Orange)

Button

__________

Main Display

Menu Select

Buttons

3-Position A/B/C

Switch

__________

4-Way Navigation

Button

Accessory

Connector

Home Button

Microphone

Data Feature

Button

•Off – On/Off/Volume knob counterclockwise.

•Zone– Toggle the Zone switch or use the radio

menu to the desired zone.

•Channel – Turn the Channel knob or use the

radio menu to the desired channel.

Antenna

16-Position

Select Knob

__________

On/Off/Volume

Control Knob

Side Button 1

__________

PTT Button

Top Side

(Select)

Button

__________

Top

Display

Bluetooth

Pairing

Indicator

Main

Speaker

Microphone

Battery

2-Position

Concentric

Switch

__________

1Select zone/channel.

2Listen for a transmission.

Press and hold Volume Set button.

Press Monitor button and listen for activity.

3Adjust volume, if necessary.

4Press the PTT button to transmit; release to

receive.

1Press and hold the Emergency button*.

2The display shows Emergency and the

current zone/channel. You hear a short,

medium-pitched tone, and the LED blinks red

momentarily.

3When acknowledgment is received, you hear

four beeps; alarm ends; and radio exits

emergency.

*PMLN7486A*

PMLN7486A

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All

1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A.

English

Menu Navigation

<or >to Menu Entry.

{, |, or }directly below Menu

Entry to select.

Hto exit.

Uor Dto scroll through sub-list.

{, |, or }directly below Menu

Entry to select.

Sending an Emergency Call

To exit emergency at any time, press and hold

the Emergency button.

Sending a Silent Emergency Call

To exit emergency at any time, press and hold

the Emergency button.

Display Status Icons

1Press the Emergency button.

2Press and hold the PTT button. Speak clearly

into the microphone.

3Release the PTT button to end call.

4Press and hold Emergency button to exit

emergency.

1Press the Emergency button.

2The display does not change; the LED does

not light up, and there is no tone.

3Silent emergency continues until you:

Press and hold the Emergency button to exit

emergency state.

Press and release the PTT button to exit the

Silent Emergency Alarm mode and enter

regular dispatch or Emergency Call mode.

Receiving a call or data

Transmitting a call or data

Blinks when the battery is low.

The more stripes, the stronger the

signal strength for the current site

(trunking only).

Direct radio to radio communication or

connected through a repeater.

On = Direct

Off = Repeater

This channel is being monitored.

L= Radio is set at Low power.

H= Radio is set at High power.

Scanning a scan list.

Blinking dot = Detects activity on the

Priority-One Channel

during scan.

Steady dot = Detects activity on the

Priority-Two Channel

during scan.

The vote scan feature is enabled.

HOR .

On = Secure operation.

Off = Clear operation.

Blinking = Receiving an encrypted

voice call.

On = AES Secure operation.

Off = Clear operation.

Blinking = Receiving an encrypted

voice call.

On = GPS enabled, and location signal

available.

Off = GPS disabled.

Blinking = GPS enabled, but location

signal unavailable.

On = User is currently associated with

the radio.

Off = User is currently not associated

with the radio.

Blinking = Device registration or user

registration with the server

failed due to an invalid

username or pin.

Data activity is present.

Bluetooth is ready.

Bluetooth is connected to the device.

Andere Handbücher für APX 8000XE

Andere Motorola Tragbares Radio Handbücher

Motorola

Motorola TLKR T7 Bedienungsanleitung

Motorola

Motorola ASTRO Digital XTS 3000 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungs- und Wartungshandbuch

Motorola

Motorola GP366R Bedienungsanleitung

Motorola

Motorola XTSTM 5000 II Bedienungsanleitung

Motorola

Motorola MT 2000 Bedienungsanleitung

Motorola

Motorola CLP series Bedienungsanleitung

Motorola

Motorola ASTRO XTS-5000 Bedienungsanleitung

Motorola

Motorola MTH500 Bedienungsanleitung

Motorola

Motorola ASTRO XTS 1500 Bedienungsanleitung

Motorola

Motorola TETRA MTP3550 Installationsanleitung

Motorola

Motorola ASTRO APX Referenzhandbuch

Motorola

Motorola ASTRO XTS 2500 Bedienungsanleitung

Motorola

Motorola P100 Series Bedienungs- und Wartungshandbuch

Motorola

Motorola GP540 Bedienungsanleitung

Motorola

Motorola ASTRO XTS 2500 Bedienungsanleitung

Motorola

Motorola GP644 Bedienungsanleitung

Motorola

Motorola SABER R Bedienungsanleitung

Motorola

Motorola GP88s Bedienungsanleitung

Motorola

Motorola MTP830 S Bedienungsanleitung

Motorola

Motorola Pro Series Elite Bedienungsanleitung

Motorola

Motorola TETRA MTH800 Bedienungs- und Wartungshandbuch

Motorola

Motorola GP380 Series Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

Beliebte Tragbares Radio Handbücher anderer Marken

Telefunken

Telefunken P5 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Lafayette

Lafayette Guardian 5500 Bedienungsanleitung

Sailor

Sailor SP3300 Bedienungsanleitung

Matra Nortel

Matra Nortel MC 6500 Bedienungsanleitung

Hytera

Hytera PD362i Bedienungsanleitung

Vertex Standard

Vertex Standard VX-P920 Series Bedienungsanleitung

Roberts

Roberts Ecologic 3 Bedienungsanleitung

LENCO

LENCO IPD-5100 Bedienungsanleitung

Baofeng

Baofeng BF-82 Bedienungsanleitung

Trevi

Trevi RA 764 Bedienungsanleitung

M/A-Com

M/A-Com P5100 Series Bedienungsanleitung

Elta

Elta 6699 Bedienungsanleitung

PURE

PURE ONE classic Series II Bedienungsanleitung

Teac

Teac PR130 Bedienungsanleitung

Philips

Philips AE6370 Bedienungsanleitung

Simoco

Simoco SRP9170 Bedienungsanleitung

Audiovox

Audiovox FR14 Bedienungsanleitung