Motorola WA9903 Montageanleitung

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

WA9903 - RFID MODULE UHF CIRCULAR (NA) POD

H/W INSTALLATION SHEET

Important: All Approval and safety information is outlined in the ‘WORKABOUTPRO4

Regulatory & Warranty Guide –part number 8000296 provided with each

WORKABOUTPRO4.

Warning:The WORKABOUTPRO4 with the RFID option must not be held closer than 20 cm from

the rest of the body. This product must not be used in a holster or on a belt-clip. RFID cannot be

used in co-transmission with WAN module.

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

1. Product Description

Easily installable expansion modules for the WORKABOUT PRO4 allow you to customise this hand-held

to meet your specific mobile computing requirements. This chapter outlines how to install the AMERICAN

UHF CIRCULAR RFID Module.

The RFID MODULE UHF CIRCULAR (WA9903) kit is based on the Sailfish UHF module from

MOTOROLA Inc. (Model: 21-121559). It is made of 4 parts:

ASSY MODULE UHF WAP4 AMERICAN

ASSY ANTENA CIRCULAR AMERICAN WAP4

INSTRUCTION SHEET WAP4 UHF CIRCULAR AMERICAN

LABELS FCC WAP4 UHF CIRCULAR VARIANT

Figure 1-1 ASSY MODULE UHF WAP4 AMERICAN Figure 1-2 ASSY ANTENA CIRCULAR

AMERICAN WAP4

Figure 1-4 LABELS FCC WAP4

UHF CIRCULAR VARIANT

Figure 1-3 INSTRUCTION SHEET WAP4 UHF CIRCULAR AMERICAN

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

2. Product Installation

Before installing a module in the WORKABOUT PRO4, all power sources must be turned off.

Remove the battery. If your unit is using AC power, disconnect it.

Figure 2-1 Battery location

With the power shut down, you can now install the AMERICAN RFID Module UHF CIRCULAR.

Remove the existing endcap and pod or backplate

Figure 2-2 WAP4 Disassembled

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

Slide the RFID Module inside the back opening

Figure 2-3 RFID Module Assembly

Drive the 4 screws that fix the RFID module on WAP4 frame

Figure 2-4 RFID Module Assembly

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

Stick EMI Gaskets on the RFID module as shown hereafter:

Plug the 2 U.FL antenna connectors to the Sailfish module.

Warning: Make sure you use the proper RF port

Figure 2-5 CIRCULAR ANTENNA Assembly

Connect UFL connector

with white rubber on the

right port.

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

Reassemble the pod antenna and the endcap

Figure 2-6 Final Assembly

IF the model number of WorkAbout Pro4 is 7528XUHFN (WLAN only) put this label:

Figure 2-7 FCC/IC Label for WLAN only variant

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

IF the model number of WorkAbout Pro4 is 7528XPUHFN (WWAN version) put this label type:

Figure 2-8 FCC/IC Label for WWAN variant

Stick the label in the location following depending on WorkAbout Pro4 variant:

Figure 2-9 WorkAbout Pro4 Long Alphanumeric Keyboard Figure 2-10 WorkAbout Pro4 Short Numeric Keyboard

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

3. Software installation:

To get current driver for WorkAbout Pro4, go to the website at:

http://community.psion.com/downloads/developer_sdkhdk/m/rfid_sdk/

Copy and install the latest CAB file named “WAP4_WM_RFID_UHF”.

Figure 3-1 Driver CAB file Figure 3-2 Driver sucFCC/ICssfully Installed

After installation, select RFID Demo in the Start menu to start the RFID sample application.

Figure 3-3 RFID demo Icon Figure 3-4 RFID Sample Application Window

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

To read the ID of TAG, press the Start Reading button ID Button. Put the TAG in front of the

antenna. Tap Stop Reading to end tag reading.

Figure 3-5 ID Tag Reading

For detailed instructions on how to use the RFID demo application, please visit

http://www.motorolasolutions.com and download ‘RFID Demo Applications User Guide (P/N 72E-

160038-01)’

Reading area:

This area depends on the TAG type, TAG packaging, Tag position and environment (metallic

or not).

Figure 4-1 Reading area

Reading Area

Tag

March 20, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

RFID MODULE UHF CIRCULAR (FCC/IC) ENDCAP

RFID Regulatory information

IMPORTANT NOTE FOR NORTH AMERICA:

The RFID must not be used whilst the host WORKABOUTPRO4 is being powered by the ac/dc

adaptor.

FCC Information to Users:

Radiation Exposure Compliance

This product complies with the FCC RF exposure limits for an uncontrolled environment. For

continued compliance, the product must not be held closer than 20 cm from the rest of the body.

This product must not be used in a holster or on a belt-clip.

The host WORKABOUTPRO4 is configured to prevent WAN and RFID to be in co-transmission. The

user cannot activate both at the same time.

Federal Communication Commission Interference Statement.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)

THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY

CAUSE UNDESIRED OPERATION.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

Inhaltsverzeichnis

Andere Motorola RFID-System Handbücher

Motorola

Motorola FX7400 Series Montageanleitung

Beliebte RFID-System Handbücher anderer Marken

Chainway

Chainway R1 Bedienungsanleitung

IFM

IFM DTC600 Bedienungsanleitung

Elatec

Elatec TWN4 MULTITECH NANO LEGIC 63 M Bedienungsanleitung

RHOMBUS

RHOMBUS DR20 Bedienungsanleitung

Sirit

Sirit IDentity 6204 Bedienungsanleitung

SOREX

SOREX FLEX Bedienungsanleitung

Omron

Omron V780-HMD68-EIP-KR Bedienungsanleitung

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS iPOINT Si Gebrauchsanweisung

Shuttle

Shuttle BR06 Gebrauchsanweisung

Digilock

Digilock Curve Keypad Basic Bedienungsanleitung

Atid

Atid AT870 Bedienungsanleitung

Chacon

Chacon 34958 Bedienungsanleitung

Paxton

Paxton PROXIMITY architectural reader Bedienungsanleitung

CipherLab

CipherLab 1800 series Bedienungsanleitung

Brady

Brady FR22 Bedienungsanleitung

Kronotech

Kronotech BLUEBOX GEN2 M30 UHF Bedienungsanleitung

Unitech

Unitech RH767 Bedienungsanleitung

Honeywell

Honeywell 026366.00 Bedienungsanleitung