Motostar LIVIMN-B Bedienungsanleitung
ITALY
MADE IN
W
A
R
R
A
N
T
Y
•
G
A
R
A
N
T
I
E
•
G
A
R
A
N
Z
I
A
•
G
A
R
A
N
T
I
A
•
G
A
R
A
N
T
I
E
•
G
A
R
A
N
T
I
E
•
Y
E
A
R
S
•
A
N
S
•
A
N
N
I
•
A
Ñ
O
S
•
A
N
O
•
J
A
H
R
E
•
3
FG00904M07- ver. 1- 07/2017
VIDEO
ENTRY PANEL
English
Français
Italiano
Español
Português
Deutsch
Türk
LIVIMN-B
LIVIMN-N
INSTALLATION MANUAL
212
161
29
60
83,5
83,5
A
B
CL.RES
M/S
LOCAL
SW1 SW3
SW4
M1
BUS
C
CL.RES CL.RES CL.RES
XDV/304
1 2 3
A
2
Page 2- Manual FG00904M07 - vers. 1- 07/2017- The contents of this manual may be changed, at any time, and without notice.
General warnings
• Important personal safety instructions: READ CAREFULLY!
• Installation, programming, commissioning and maintenance must only be performed by qualified and experienced personnel
in compliance with applicable regulations.
• Wear antistatic shoes and clothing if working on the control board.
• Keep hold of these warnings.
• Always disconnect the electrical power supply during cleaning or maintenance.
• This product should only be used for the purpose for which it was explicitly designed.Any other use is considered dangerous.
• The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.
Description
Video receiver powered from BUS.
Terminal board A
+ – Local power supply
BBUS line input
–+Doorbell
AL Alarm input
Power supply source selector switch (BUS/LOCAL) B
A Position of link with locally powered device
2 Position of link with device powered from BUS
Closing resistance (CL.RES) C
The link should be inserted in the last device in the line only.
D
MASTER SLAVE
M/S M/S
2
1
E
F
G H
Page 3- Manual FG00904M07 - vers. 1- 07/2017- The contents of this manual may be changed, at any time, and without notice.
Master/Slave selector switch (M/S) D
If two or more receivers have been set up to respond to the
same call, the preview image of the caller is shown only on
the master receiver(s).
Technical data
Type
LIVIMN-B
LIVIMN-N
Power supply from BUS (VDC)
15÷20
Consumption (mA max)
410
Consumption in stand-by mode (mA)
<1
Local power supply (VDC)
16-18
Consumption (mA max)
370
Consumption of single LED (mA) (pan-
ic alarm, disabling ringtone)
1
Storage temperature (°C)
-25 to +70
Operating temperature (°C)
0 to +35
IP Rating
20
Video standard
PAL/NTSC
LCD TFT colour display (inches)
7
Installation
Install the device at a suitable height for the user.
• EPress button 1; unhook the bracket from the device by
sliding it along 2.
• Fasten the bracket to the recessed box:
round Ø 60mm For rectangular 503 GH. Use the screws
provided, follow the direction marked “TOP” and avoid over-
tightening the screws.
I
K
J
1
Page 4- Manual FG00904M07 - vers. 1- 07/2017- The contents of this manual may be changed, at any time, and without notice.
• Make the connections and fit the device onto the bracket
IJ.
• To unhook the unit from the bracket, press the button and
lift the device K.
For recessed installation refer to the recessing kit manual.
B
C
F
4
G
E
H
I
A
x5
Page 5- Manual FG00904M07 - vers. 1- 07/2017- The contents of this manual may be changed, at any time, and without notice.
Setting melodies
☞All the programming stages described below must be carried out in sequence:
1- Going into Programming.
Press button 5 times in 5 secs 1.
A short beep confirms that you have entered programming mode.
2- Programming the melody associated with a call from the entry panel.
To listen to the melodies in sequence, press key 2.
To select the melody and exit programming, press key 3.
To select the melody and continue with programming, press key 4.
3- Programming the melody associated with a call from the front door.
To listen to the melodies in sequence, press key 5.
To select the melody and exit programming, press key 6.
To select the melody and continue with programming, press key G.
4- Programming the number of rings for the call.
Press key 8 as many times as you want it to ring (from 1 to 6 rings). Three sec-
onds after the last press of the key the call selected for the chosen number of rings
will be played back.
To exit programming, press key I.
☞See the entry panel documentation for call programming.
L
La
MAX 8
Lb
LIVIPR
LIVI-AS
La
LIVI-AS LIVI-ASLIVI-AS
VCM/1D UTP/CAT 5 2x2,5mm2
La ≤100 m ≤30 m
≤100 m A–
Lb ≤25 m – ≤60 m
La + Lb ≤150 m
A
Page 6- Manual FG00904M07 - vers. 1- 07/2017- The contents of this manual may be changed, at any time, and without notice.
Installation diagrams
LLimits and distances with local power supply
A Devices powered locally.
M
La
La
N° Master N° Slave
Lb
LIVIPR
LIVI-AS
VCM/1D UTP/CAT 5 2x2,5mm2
La ≤100 m ≤30 m –
Lb ≤25 m – ≤60 m
La + Lb ≤150 m
VCM/1D UTP CAT5
N° Master 1 1
N° Slave 4 1
Page 7- Manual FG00904M07 - vers. 1- 07/2017- The contents of this manual may be changed, at any time, and without notice.
Installation diagrams
MLimits and distances with power supply from BUS
www.motostar-smarthome.com
contact@motostar-smarthome.com
è un marchio registrato di
Label Habitat SaS - 10 rue Léo Lagrange - 27950 Saint Marcel - France
Page 8- Manual FG00904M07 - vers. 1- 07/2017- The contents of this manual may be changed, at any time, and without notice.
This product complies with the relevant directives in force.
Decommissioning and disposal. Dispose of the packaging and the device at the end of its life cycle responsibly, in compliance
with the laws in force in the country where the product is used. The recyclable components are marked with a symbol and the
material's ID marker.
THE DATA AND INFORMATION SHOWN IN THIS MANUAL ARE TO BE CONSIDERED AS SUBJECT TO CHANGE AT ANY TIME AND WITHOUT THE NEED FOR ANY ADVANCE
WARNING. MEASUREMENTS, UNLESS OTHERWISE INDICATED, ARE IN MILLIMETRES.
ITALY
MADE IN
W
A
R
R
A
N
T
Y
•
G
A
R
A
N
T
I
E
•
G
A
R
A
N
Z
I
A
•
G
A
R
A
N
T
I
A
•
G
A
R
A
N
T
I
E
•
G
A
R
A
N
T
I
E
•
Y
E
A
R
S
•
A
N
S
•
A
N
N
I
•
A
Ñ
O
S
•
A
N
O
•
J
A
H
R
E
•
3
FG00904M07- ver. 1- 07/2017
PORTIER VIDÉO
EXTERNE
English
Français
Italiano
Español
Português
Deutsch
Türk
LIVIMN-B
LIVIMN-N
MANUEL D'INSTALLATION
212
161
29
60
83,5
83,5
A
B
CL.RES
M/S
LOCAL
SW1 SW3
SW4
M1
BUS
C
CL.RES CL.RES CL.RES
XDV/304
1 2 3
A
2
Page 2- Manuel FG00904M07 - vers. 1- 07/2017- Le contenu de ce manuel est susceptible de subir des modifications à tout moment et sans aucun préavis.
Instructions générales
• Instructions importantes pour la sécurité des personnes : À LIRE ATTENTIVEMENT !
• L’installation, la programmation, la mise en service et l'entretien doivent être eectués par du personnel qualifié et dans le
plein respect des normes en vigueur.
• Porter des vêtements et des chaussures antistatiques avant d'intervenir sur la carte électronique.
• Conserver ces instructions.
• Toujours couper le courant électrique durant les opérations de nettoyage ou d'entretien.
• Ce produit ne devra être destiné qu'à l'utilisation pour laquelle il a été expressément conçu. Toute autre utilisation est à
considérer comme dangereuse.
• Le fabricant décline toute responsabilité en cas d'éventuels dommages provoqués par des utilisations impropres, incorrectes
et déraisonnables.
Description
Poste vidéophonique interne avec alimentation par BUS.
Bornier A
+ – Alimentation locale
BEntrée ligne BUS
–+Appel depuis palier
AL Entrée alarme
Sélecteur source d’alimentation (BUS/LOCAL) B
A Position du shunt avec dispositif alimenté localement
2 Position du shunt avec dispositif alimenté par BUS
Résistance de terminaison de ligne (CL.RES) C
Le shunt ne doit être activé que dans le dernier dispositif de
la ligne.
Andere Handbücher für LIVIMN-B
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Motostar Gegensprechanlage Handbücher
