Mottura Xmode 99688 Bedienungsanleitung
POWERED ELECTRONIC LOCK
ESCUTCHEON DISPLAY
99.688 - 99742
GENERAL WARNINGS
Mottura Serrature di Sicurezza S.p.A. thanks you for choosing this product and reminds you:
- to read these instructions very carefully before installing and using this product and before doing any maintenance.
- the escutcheon display is sensitive to electrostatic discharges that may come from your body; before handling the escutche-
on, make sure you have taken all precautions to prevent it from being permanently damaged by an electrostatic discharge.
- to keep these instructions for future use and attach the sales receipt to validate the warranty.
- In case of problems, contact your authorized dealer only.
“DO NOT use a liquid, spray, or wet cloth to clean the escutcheon! If liquids enter the scanner, they will oxidize and permanently
damage its components. Use a dry cloth only. DO NOT paint the escutcheon with any method or substance. Failure to follow
these instructions will immediately void the warranty.”
Mottura Serrature di Sicurezza S.p.A. may change the characteristics of the products described in these instructions at any time
and without notice.
ESCUTCHEON FUNCTIONS
Unless otherwise specied, all of the functions described in this manual refer to both PROTECTED-duplication and FREE-duplication
TAGS (transponder keys).
The escutcheon with color display can be connected to Mottura’s powered “XMODE” lock on the inside of the door to replace
the 3-key escutcheon. It can be used to open and close the lock from inside the door, and can fully manage all of the available
lock functions plus the ones used by means of the internal 3-key escutcheon. Specically, this visual interface displays lock
movement phases (opening and closing), any errors that may be generated during these phases, lock and door status, power
supply status, and programming access.
99298 - XMODE - ESCUTCHEON DISPLAY - REV. 01
2
1 - THE ESCUTCHEON ............................................................................................................................ pag. 3
2 - OPENING AND CLOSING THE LOCK ........................................................................................................ 3
3 - CHANGING THE DISPLAY LANGUAGE ...................................................................................................... 4
4 - PROTECTED TAG SYSTEM ............................................................................................................................. 5
4.1 - DELETING A SINGLE TAG
4.2 - DELETING ALL TAGS
4.3 - ENTERING A SERVICE TAG
4.4 - ENTERING A MASTER TAG
4.5 - MEMORIZED TAG ATTRIBUTES
5 - FREE TAG SYSTEM ....................................................................................................................................... 11
5.1 - ENTERING A MASTER TAG
5.2 - ENTERING A SERVICE TAG
5.3 - DELETING SINGLE TAG
5.4 - DELETING ALL TAGS
6 - DISABLING SERVICE TAG (FREE/PROTECTED TAG SYSTEM) .............................................................. 15
7 - ENABLING SERVICE TAG (FREE/PROTECTED TAG SYSTEM) .............................................................. 16
8 - QUICK LOCK STATUS INFORMATION - DOOR OPEN .......................................................................... 17
9 - QUICK LOCK STATUS INFORMATION - DOOR CLOSED ..................................................................... 17
10 - POWER SUPPLY ....................................................................................................................................... 17
11 - EXTERNAL KEYPAD CODES ............................................................................................................................ 18
11.1 - ENTERING PROGRAMMING MODE
11.2 - INSERTING CODES
11.3 - DELETING A SINGLE CODE
11.4 - DELETING ALL CODES
11.5 - PREVIOUS MENU
12 - CHANGING LOCK CLOSING MODE ............................................................................................................ 21
13 - PARENTAL SECURITY CODES ....................................................................................................................... 22
13.1 - OPENING / CLOSING LOCK ON INSIDE
13.2 - DELETING CODE FROM INSIDE
14 - COURTESY TIMES ....................................................................................................................................... 24
15 - DATE AND TIME ....................................................................................................................................... 25
16 - TIME SLOT BACK STOP .................................................................................................................................... 26
16.1 - DELETE A SINGLE TIME SLOT
16.2 - DELETE TIME ONE DAY SLOT
16.3 - DELETE ALL TIME SLOTS
17 - TAGS IN TIME SLOT ....................................................................................................................................... 30
17.1 - DELETING A SINGLE TIME SLOT
17.2 - DELETING TIME SLOTS ON ONE DAY
17.3 - DELETING ENTIRE USER GROUP
17.4 - DELETING ALL TIME SLOTS /USERS
18 - ACCESS CONTROL ....................................................................................................................................... 34
18.1 - DELETING ALL ACCESS CONTROL INFORMATION
19 - INFORMATION ....................................................................................................................................... 35
20 - EXITING THE MENU ....................................................................................................................................... 36
21 - TROUBLESHOOTING ....................................................................................................................................... 37
CONTENTS
The system automatically returns to stand-by if no keys are pres-
sed for thirty seconds.
3
2. OPENING AND CLOSING THE LOCK
Press the “E”key on the escutcheon to open and close the lock, in the same way as with the internal 3-key escutcheon.
TYPE OF POWER SUPPLY
1Press "E".
Opening operation.
OPENINGCLOSING
1If AUTOMATIC CLOSING mode
is NOT ON, press "E". Closing
operation.
Closing operation in AUTOMATIC
CLOSING mode with COURTESY
time on.
2
Opening .
2
Closing operation completed.
Door closed.
3
Opening operation
completed. Door open
All of the following programming operations must be done with
the door and the lock open.
1. THE ESCUTCHEON
OPERATION IN PROGRESS
PROGRESS OF OPERATION
TAG NO. USED
(FOR PROTECTED SYSTEM ONLY)
FUNCTION KEYS
EXECUTE ” KEY
GREEN LEDRED LED
LANGUAGE
99742 - Rectangular version
99298 - XMODE - ESCUTCHEON DISPLAY - REV. 01
4
3. CHANGING THE DISPLAY LANGUAGE (if not necessary, go to chapter 4)
1
At door open, press any
arrow key to
activate the menu. 2
Functions screen
press (Menu). 3
Press until (Other fun-
ctions) and press "E".
6
Select "INFORMATION"
menu with
and press "E".
7
Press (Other) several
times until reaching
LANGUAGE menu 8
Press (Change) to set the
language you want (English,
Spanish, French, Italian) and
press "E".
9
Select "MENU"
with
and press "E".
10
Pressuntil
(Exit), press
"E" to finish.
4PROTECTED SYSTEM
Place system CARD (GREEN)
or MASTER TAG (ORANGE
TAG/card) on external escutcheon.
FREE SYSTEM 5PROTECTED SYSTEM
Recognition of CARD.
FREE SYSTEM
5
4. PROTECTED TAG SYSTEM (if not necessary, go to chapter 5)
1At door open, press any
arrow key to
activate the menu. 2
Functions screen
press (Menu). 3
Press "E" (TAG Keys).
4
Place system CARD (GREEN)
on external escutcheon. 5
Recognition of CARD. 6
Press to scroll menu.
9
Place TAG to delete on ex-
ternal escutcheon and press
(+ TAG delete).7
Press "E" (Remove TAG). 8
Warning message.
11
Press "E" (Exit). 12
Pressuntil (Exit),
press "E" to finish.10TAG deleted.
In a system with protected key (TAG) duplication, all keys are supplied as MASTERS.
4.1 DELETING A SINGLE PROTECTED TAG
99298 - XMODE - ESCUTCHEON DISPLAY - REV. 01
6
11
Press to scroll
menu.
Pressuntil (Exit),
press "E" to finish.
10
All TAG deleted.
4.2 DELETING ALL TAGS - PROTECTED SYSTEM
Press "E".
1At door open, press any
arrow key to
activate the menu. 2
Functions screen
press (Menu). 3
Press "E" (TAG Keys).
4
Place system CARD (GREEN)
on external escutcheon. 5
Recognition of CARD. 6
Press to scroll menu.
9
Place SYSTEM TAG on exter-
nal escutcheon and press
(+ TAG delete).7
Press "E" (Remove TAG). 8
Warning message.
7
9
Place the SERVICE TAG to be
memorized on the external
escutcheon.7
Press "E" (TAG insertion
SERVICE).
10
TAG recognized and me-
morized.
8
Press (Insert).
4.3 ENTERING A SERVICE TAG
11
Press "E" (Exit).
12
Pressuntil (Exit),
press "E" to finish.
1At door open, press any
arrow key to
activate the menu. 2
Functions screen
press (Menu). 3
Press "E" (TAG Keys).
4
Place system CARD (GREEN)
on external escutcheon. 5
Recognition of CARD. 6
Press to scroll menu.
99298 - XMODE - ESCUTCHEON DISPLAY - REV. 01
8
8
Place the MASTER TAG to be
memorized on the external
escutcheon.7
Press (Insert). 9TAG recognized and me-
morized.
4.4 ENTERING A MASTER TAG
10
Press "E" (Exit).
11
Pressuntil (Exit),
press "E" to finish.
1At door open, press any
arrow key to
activate the menu. 2
Functions screen
press (Menu). 3
Press "E" (TAG Keys).
4
Place system CARD (GREEN)
on external escutcheon. 5
Recognition of CARD. 6
Press to scroll menu.
9
The assigned and changeable attributes are:
-HIERARCHY (Type) denes whether the TAG is "Master" or "Service"
-GROUP lets you assign a TAG in the system to a dened group and then to
time slots. By default, the TAG belong to group “zero,” i.e., DO NOT belong to
any group. For more information, see chapter 17 (TAG IN TIME SLOT).
-ENABLE lets you exclude or reinsert a single TAG from/into the system without
having to delete it from memory.
This function is essential: if a TAG is disabled with this function it NEVER can
have access to the lock, even if inserted in the access check.
4.5 MEMORIZED TAG ATTRIBUTES (FOR PROTECTED SYSTEMS ONLY)
7
Press "E" (Stored tag attri-
butes).
8A
There are no TAG in me-
mory.
8B
Analysis of TAG in me-
mory.
9A
Display TAG detected
(1 of 5), no. rst TAG de-
tected (2), TAG attributes.
1At door open, press any
arrow key to
activate the menu. 2
Functions screen
press (Menu). 3
Press "E" (TAG Keys).
4
Place system CARD (GREEN)
on external escutcheon. 5
Recognition of CARD. 6
Press to scroll menu.
99298 - XMODE - ESCUTCHEON DISPLAY - REV. 01
10
9B
Press to scroll memori-
zed TAG.
Press to change TAG
attributes, "E" to return to previous
menu.
10
Press to display next
TAG (no. 127) with its at-
tributes.
Press to change TAG attributes.
11
Press (Move) to select
attribute.
Press to change value
of selected attribute.
12
Press to change "Type" from MASTER to SERVICE. Press to scroll menu. Press to change "Group" from
0 to C. Press to scroll menu. Press to change "Active" from YES to NO. Press "E" to conrm.
Note: with these settings, TAG no. 127 is NOT enabled to access the lock, even though it is in memory.
Press "E" to return to previous menu.
13
Press to scroll menu.
14
Press "E".
15
Pressuntil (Exit),
press "E" to finish.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
