Movea MotionPod Bedienungsanleitung

EN-2011

Version

MotionPod™

System

Users’ Manual

ABLE OF CON EN

I. erminology ................................................................................................................................................................................ 3

II. Used Icons Significance ......................................................................................................................................................... 3

III. Product diagram ....................................................................................................................................................................... 4

IV. Safety rules .................................................................................................................................................................................. 5

V. Introduction ................................................................................................................................................................................ 6

VI. Get Familiar with MO IONPOD™ ..................................................................................................................................... 6

1. MO IONPOD™ ...................................................................................................................................................................... 6

2. MotionController™ ............................................................................................................................................................. 7

3. Mpod Charger ....................................................................................................................................................................... 8

VII. Usage ............................................................................................................................................................................................... 9

1. Recharging your MO IONPOD™ ................................................................................................................................. 9

2. How to switch the MO IONPOD™ on/off ............................................................................................................ 10

3. How to wear the MO IONPOD™ .............................................................................................................................. 10

VIII. Precautions ............................................................................................................................................................................... 11

1. Using environments ........................................................................................................................................................ 11

2. Characteristics and environmental conditions ................................................................................................ 12

IX. Calibration ................................................................................................................................................................................ 13

X. Cleaning ...................................................................................................................................................................................... 14

1. Cleaning the MO IONCON ROLLER™ .................................................................................................................. 14

2. Cleaning the MO IONPOD™ ....................................................................................................................................... 14

XI. Signs and labels ...................................................................................................................................................................... 15

1. MO IONPOD™ ................................................................................................................................................................... 15

2. MO IONCON ROLLER™ .............................................................................................................................................. 16

3. CHARGER .............................................................................................................................................................................. 16

XII. Maintenance ............................................................................................................................................................................. 17

XIII. What to do in case of system breakdown ................................................................................................................. 17

XIV. Regulatory information ..................................................................................................................................................... 18

3. Notice to Users: ................................................................................................................................................................. 18

4. FCC Statement: .................................................................................................................................................................. 18

5. Industry Canada Equipment Notice ................................................................ Erreur ! Signet non défini.

I. ERMINOLOGY

Code Name Description

MPOD

MotionPod

designates the

wristwatch

sized

motion sens

ing case

with a

transparent casing. See figure 1 below.

C RLER

Motion

Controller o

r charger/data receiver of the

MPOD device. Designates data

receiving and/or recharging case which connects on the computer via USB port.

See figure 2 below

CHARGER

Designates the

recharging case which connects

the computer via USB port

and

is used only for charging the MPOD. It does not have data receiving capabilities.

Please note that C RLER/CHARGER initials are mentioned on the labels at the back of the devices

II. USED ICONS SIGNIFICANCE

Icon Description

« CAU ION » Symbol

Environnemental friendly Recommandations

Part worn by the Patient

III. PRODUC DIAGRAM

Antenna

Finger Grips

On/OFF Button

Orange LED indicates

charging

Green LED

indicates

transmission state

Transparent top cover

Black bottom cover

FIGURE 1 : MO IONPOD™

M OD

charging cavity

Spring contacts for

electrical link with the

M OD

Light indicators

USB

port

rx tx pwr

Green power light:

indicates that the

Motion Controller is

receiving power

Blue RX/TX lights:

RX signal reception

TX signal transmission

FIGURE 2 : MO IONCON ROLLER™

IV. SAFE Y RULES

arning

Please read this user’s guide very carefully before use.

Advise all recommendations to end-user and keep informed of all risks endured using the system.

C RLER/CHARGER must be plugged using equipment in compliance with IN O standard 60950-1

via USB2 port with the provided cable. In order to fulfill safety requirements for electro-medical

systems and equipments, power must be supplied by a transformer in compliance with the EN

standard 60950.

MPOD is the part in contact with the patient, who is not to be in contact with the C RLER or the

computer during use. Patients are to be held at 1,20m to 1,60m away from this equipment.

MPOD is not meant to be used with inflammable gaz.

“ he MPOD is not protected from defibrillation shocks. »

Do not open or replace the Li-ion battery of the MPOD. Do not use non

rechargeable battery or any other battery that could damage the product and

presents health risks or cause accidents.

DO NOT EXPOSE TO FIRE–Risk of explosion, DO NOT OPEN

CAUTION: For your own safety do not open the charging case, risk of electric shock.

CAUTION: the USB cable serves as a disconnection device

Waste management process of electric and electronic products differs from that of municipal waste

and requires special intervention from waste management services appointed by the government or

the local community. he crossed trashcan shows that the European directive 2002/96/CE applies

to this product.

Waste separation prevents from any negative consequences on the environment or public health. It

is the most important condition for better handling and recycling electric and electronic

components. For more information about handling of worn out equipments, contact your local

waste management service or the nearest product distributor.

It is highly recommended not to connect any peripherals (modem, printers…) other than the

MO IONCON ROLLER on the computer during the use of the system. he MPOD has a Li Ion battery

and therefore must be recycled according to current standards. It must be returned to the

manufacturer.

V. IN RODUC ION

hank you for purchasing our motion sensing product MPOD.

his user manual was written to familiarize you with the use of this system. Read it carefully in

order to rightfully use the device. Always have this guide near you when you use this product.

he MPOD is an electronic recording device with wireless transmission. It was conceived to provide

“movement signature” of a body segment in real time and without cable connection.

Its main purpose is to record and/or compare a series of motion exercises: Series of rehabilitation

exercises with prior exercises, movement amplitudes gestures protocols etc… carried out for limb

rehabilitation (for example of joint movement).

MPOD only gives information related to the orientation of a patient’s part of body.

Any other use must be avoided.

his product designed and manufactured by Movea, is well adapted for biomechanical applications,

rehabilitation and joint assessment in physical therapy. For this reason, it must be used in a

controlled environment, at a practice office, and by qualified personnel. he user of MPOD must

have red and understood this notice.

he MPOD System is provided with software that must be the only software solution to be used with

this product. For customers willing to manufacture a product based on the MPOD system, please

make sure the person in charge of using the MotionPod system is fully trained.

VI. GE FAMILIAR WI H MO IONPOD™

Please take a moment to familiarize with the different components of your measuring system. For

the following section it is advised to refer to the material scheme II.

1. MO IONPOD™

MPOD is standard wristwatch-sized sensor with a transparent casing that embodies the Motion

sensing component on the upper side (Figure 3). It is intended to be worn on the moving part of the

body where we want to perform motion measurement. It must be fixed mechanically by means of

straps or bracelets (not provided) via the transparent mechanical interface.

Photo of MotionPod™

Side view of MPOD scheme

FIGURE 3 : MO IONPOD™

On the top of MPOD you can see the electronic components with an imprinted name and logo of the

manufacturer (Movea,), the brand name of the product (MotionPod). he sensor button indicates

the exact orientation of the MPOD when positioning it properly on the body. Please pay attention to

these elements as they are useful to establish the MPOD correctly in the application that is provided

with your system.

From a side view (see Figure 3, on the right), you can see a Black bottom cover of the MPOD. his

part allows fixing the MPOD on any kind of supporting facet designed to accommodate it. It can be

the charging box (see below) or the mechanical interface for bracelet or strap.

Figure 1 summarizes the first visual elements on the MPOD.

FIGURE 4: MPOD MECHNICAL IN ERFACE FOR BRACELE OR S RAP

2. MO IONCON ROLLER™

he C RLER is a white case with a surface identical to that of a credit card and approximately 2cm

thick (see Figure 5). On the upper facet you can see an imprinted logo of Movea, and light indicator

inscriptions (see below for their significance). At the back of the Motion controller a sticker

imprinted Controller™ distinguishes it from the Charger who has the same casing.

Mechanical fixing base

Connected on the PC via USB port cable (provided), it allows:

•Data reception transmitted from the MPOD by radio frequency (2.45 GHz Bluetooth Band)

•Charging of the MPOD

FIGURE 5 : MO IONCON ROLLER™

he C RLER features a wireless link between the MPOD and the computer where you run your

applications. he data goes to the computer via USB cable.

3. MPOD CHARGER

FIGURE 6: MPOD CHARGER

he CHARGER and the C RLER have the same casing. Since the C RLER has the same functionality,

the CHARGER is therefore optional. It‘s only needed when several MPODs need to be charged

regularly. On the upper facet you can see an imprinted logo of Movea, and light indicator

inscriptions (see below for their significance). At the back of the Motion controller a sticker

imprinted Controller™ distinguishes it from the Charger who has the same casing.

Connected on the PC via USB port cable (provided), it allows:

•Charging of the MPOD

VII. USAGE

1. RECHARGING YOUR MO IONPOD™

The CTRLER must be connected to a computer in compliance with IEC/EN

60950-1 standard. In order to fulfill safety, power must be supplied by a

transformer in compliance with EN standard 60950. Only the MPOD is in contact

with the patient environment.

First connect the C RLER to the USB port of your computer using the provided cable.

Once the C RLER is connected, the light indicator “pwr” goes on and gives a green continuous light

(see Figure 2). he two other light indicators are blue diodes which light up along with the first one

once connected to the USB port. hey switch off immediately then blink twice to finally go off

completely.

Put the C RLER horizontally on a table, facet where the logo is imprinted upwards. You can see the

cavity where you can clip the MPOD in. Insert the MPOD by its Black bottom cover directly in the

cavity. he button of the MPOD must be pointing to the Logo. he MPOD must completely fit in the

cavity.

A clockwise rotation of approximately 30° mechanically locks the MPOD in the cavity and therefore

electrically connects it to the C RLER for recharge. A “click” sound indicates that the system is

suitably locked and started charging (if charging is needed). he whole unit must look like the

photograph on Figure 5.

MPOD encloses a battery. The performance gradually decreases over an

extended period of time (see the number of possible charging cycles).

case

tended period of no use

, it is advised to check the

battery

condition

by charging it. If the battery does not charge any more, it is necessary to return

the product to the manufacturer for maintenance (battery exchange). This

operation cannot be carried out by the user. Opening of MPOD (or CTRLER) will

void the manufacturer’s warranty.

IMPORTANT (Switzerland): Part 4.10 of the SR 814.013 norm is applicable to

batteries

FIGURE 7 : HE MPODFIXED ON HE C RLER, READY FOR RECHARGE

While charging, an orange light indicator located at the back of the MPOD switches on. It switches

off as soon as the recharging process is complete. heoretically, charging duration is 3 hours.

When the MPOD is recharged after a very long period of no use, it is possible that the orange light

indicator takes a few minutes before switching on.

If the battery reaches its critical point due to a long period of storage, the only solution is to return

the MPOD to your supplier for battery replacement (at own expense).

It is dangerous and strictl

y prohibited to use any other

charging equipment than

the CTRLER/CHARGER of Movea. Using other charger can damage the MPOD and

will void your manufacturer’s warranty.

The MPOD should not be opened. Battery replacement should only be carried out

by your supplier.

2. HOW O SWI CH HE MO IONPOD™ ON/OFF

he MO IONCON ROLLER™ must be connected to the PC. he MPOD must formerly be recharged.

ake the MPOD off the C RLER.

Slightly push the button on the MPOD to switch it on. At this stage, the green light indicator blinks

with a 4 second interval. he MPOD is not transmitting any data to the C RLER at this point, it is

simply on IDLE state. You can switch the MPOD off by a pressing on the button for 4 seconds. he

green light indicator blinks twice before switching off for 3 seconds. It then switches on for 1

second. As soon as the indicator emits a continuous light, you can release the button.

he provided software will guide you through an effective data transmission between the MPOD

and the C RLER.

3. HOW O WEAR HE MO IONPOD™

Andere Handbücher für MotionPod

Inhaltsverzeichnis

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung