Moxa Technologies MGate 5119 Series Bedienungsanleitung

P/N: 1802051190010

*1802051190010*

MGate 5119 Series

Quick Installation Guide

Version 1.0, December 2021

Technical Support Contact Information

www.moxa.com/support



- 2 -

Overview

The MGate 5119 Series is an Ethernet gateway designed for the power

industry to integrate Modbus, DNP3, IEC 60870-5-101/104 devices to

an IEC 61850 MMS network.

Package Checklist

Before installing the MGate 5119, verify that the package contains the

following items:

•1 MGate 5119 gateway

•1 serial cable: CBL-RJ45F9-150

•Quick installation guide (printed)

•Warranty card

Please notify your sales representative if any of the above items is

missing or damaged.

Optional Accessories (can be purchased separately)

•CBL-F9M9-150: DB9-female-to-DB9-male serial cable, 150 cm

•CBL-F9M9-20: DB9-female-to-DB9-male serial cable, 20 cm

•CBL-RJ45F9-150: RJ45-to-DB9-female serial cable, 150 cm

•CBL-RJ45SF9-150: RJ45-to-DB9-female serial shielded cable, 150

•Mini DB9F-to-TB DB9: Female-to-terminal-block connector

•WK-36-02: Wall-mounting kit, 2 plates with 6 screws

•CBL-PJTB-10: Non-locking barrel plug to bare-wire cable

Hardware Introduction

LED Indicators

LED

Color

Description

Ready

Off

Power is off or a fault condition exists

Green Steady: Power is on, and the MGate is functioning

normally

Red

Steady: Power is on, and the MGate is booting up

Blinking slowly: Indicates an IP conflict, or the

DHCP or BOOTP server is not responding properly

Flashing quickly: the microSD card failed

MB/101/

104/DNP3

Off

No communication with a Modbus/101/104/DNP3

device

Green Normal Modbus/101/104/DNP3 communication in

progress

Red

When the MGate 5119 acts as a Modbus master:

1. Received an exception code from the slave

device

2. Received a framing error (parity error,

checksum error)

3. Timeout (the master sent a request but no

response was received)

When the MGate 5119 acts as an IEC 60870-5-

101/104/ DNP3 master:

- 3 -

LED

Color

Description

1. Received an outstation exception (format

error, checksum error, invalid data, outstation

responds are not supported)

2. Timeout (the master sent a command, but no

response was received)

850

Off

No communication with the IEC 61850 system

Green

Normal IEC 61850 communication in progress

Red

When the MGate 5119 acts as an IEC 61850

server:

1. Received an abnormal package (wrong

format, unsupported function code)

2. Failed to establish an IEC 61850 connection

3. Disconnected the IEC 61850 connection

Dimensions

Unit: mm (inch)

Reset Button

Restore the MGate to factory default settings by using a pointed object

(such as a straightened paper clip) to hold the reset button down until

the Ready LED stops blinking (approximately five seconds).

Pull-high, Pull-low, and Terminator for RS-485

Beneath the MGate 5119’s top cover, you will find DIP switches to

adjust each serial port’s pull-high resistor, pull-low resistor, and

terminator.

Pull-high

resistor

Pull-low

resistor

Terminator

1 kΩ

120 Ω

OFF

150 kΩ*

–*

*Default

- 4 -

Hardware Installation Procedure

1. Connect the MGate 5119's terminal block to the power supply,

which could provide 12 to 48 VDC.

2. Use a serial or Ethernet cable to connect the MGate to the Modbus

RTU/ASCII/TCP, DNP3 Serial/TCP, IEC60870-5-101/104 device.

3. Use an Ethernet cable to connect the MGate to the IEC 61850 MMS

system.

4. The MGate 5119 is designed to be attached to a DIN rail or

mounted on a wall. For DIN-rail mounting, push down the spring

and properly attach it to the DIN rail until it “snaps” into place. For

wall mounting, install the wall-mount kit (optional) first and then

screw the device onto the wall. An M3 screw is suggested, and the

minimum length of the screw should be 10 mm.

The following figure illustrates the two suggested mounting options:

The following figure illustrates how to attach screws to the mounting

kits:

DIN Rail:

- 5 -

Wall-mount:

NOTE

The equipment is intended to be supplied by the external power

source (UL listed/ IEC

60950-1/ IEC 62368-1), which output

complies

with ES1/SELV, PS2/LPS, output rating is 12 to 48

VDC, 0.455 A min., an ambient temperature 75°C minimum.

NOTE

Before connecting the Equipment to DC power inputs, make

sure DC power source voltage is

stable

•

The wiring of input terminal block shall be installed by

skilled person.

•

Wire type: Cu

•

Only use 28-18 AWG wire size, torque value 0.5 N-m.

•One individual conductor in a clamping point.

NOTE

If you are using a Class I adapter, the power cord should be

connected to an outlet with an earthing connection

Software Installation Information

You can download the User's Manual and Device Search Utility (DSU)

from Moxa's website: www.moxa.com. Please refer to the User’s

Manual for additional details on using the DSU.

The MGate 5119 also supports login via a web browser.

Default IP address: 192.168.127.254

Default account: admin

Default password: moxa

- 6 -

Pin Assignments

Serial Port (Male DB9)

Pin RS-232

RS-422/

RS-485 (4W)

RS-485 (2W)

DCD

TxD-(A)

–

RXD

TxD+(B)

–

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

*Signal ground

Ethernet Port (RJ45)

Signal

Tx+

Tx-

Rx+

Rx-

Power Input and Relay Output Pinouts

V2+ V2-

V1+ V1-

Shielded

Ground

Power

Input 2

Power

Input 2

N.O. Common

N.C.

Power

Input 1

Power

Input 1

Specifications

Power Requirements

Power Input

12 to 48 VDC

Input Current

455 mA max.

Operating Temperature

-40 to 75°C (-40 to 167°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

Dimensions

36 x 120 x 150 mm (1.42 x 4.72 x 5.91 in)

Reliability

Alert Tools

Built-in buzzer and RTC

MTBF

1,180,203 hrs.

Moxa Inc.

No. 1111, Heping Rd., Bade Dist., Taoyuan City 334004, Taiwan

Andere Handbücher für MGate 5119 Series

Inhaltsverzeichnis

Andere Moxa Technologies Tor Handbücher

Moxa Technologies

Moxa Technologies MGate 5101-PBM-MN Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort PCG Handbuch

Moxa Technologies

Moxa Technologies OnCell G3100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3270I Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5111 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3150A-LTE Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3280 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Z3150 Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-501-T-AZU-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5217 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5134 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3470A-LTE Installations- und Betriebshandbuch

Moxa Technologies

Moxa Technologies MGate MB3270 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3000 Modbus Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3111 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3000 Modbus Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3170 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3000 Modbus Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell Series Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung