Moxa Technologies NPort 5610 series Merkblatt

Configuration Manual

RT-1000 Multichannel

DF Control System

„MOXA NPort 5610“

for DF-Channel Network Connectivity

RT-1000 MC DF Control System

RHOTHETA Page 2 of 13 Configuration Manual

Edited by:

RHOTHETA Elektronik GmbH

Kemmelpark

Dr.-Ingeborg-Haeckel-Str. 2

82418 Murnau

Germany

Tel.: +49 8841 4879 - 0

Fax: +49 8841 4879 - 15

Internet: www.rhotheta.de

E-Mail: [email protected]

-Issue: 2016/09/09 [Rev 1.00.a]

-Document-ID: 12-9-1-0015-10-11-3-60

Note

The manufacturer reserve the right to make modifications at any time and without previous

information of the here described product.

RT-1000 MC DF Control System

RHOTHETA Page 3 of 13 Configuration Manual

Content

Description.......................................................................................................................4

Initial IP Address Configuration.....................................................................................5

Web Console Configuration............................................................................................6

3.1

Opening Your Browser ...........................................................................................................................6

3.2

Network Settings.....................................................................................................................................7

3.3

Serial Settings.........................................................................................................................................8

3.4

Operating Settings and TCP Port No. ....................................................................................................9

3.5

Additional Information for Service & Maintenance / Troubleshooting ..................................................11

3.5.1

Monitor Line Function ..............................................................................................................11

3.5.2

Monitor Async Function...........................................................................................................12

Note.................................................................................................................................13

RT-1000 MC DF Control System

RHOTHETA Page 4 of 13 Configuration Manual

1 Description

The DF-Control System converts the serial data from the DF-Channels into Ethernet data for

the transmission via LAN. For the RT-1000 Multichannel direction finder system a special

configured MOXA NPort 8/16 channel device is in use, to make it possible, to access the

Direction Finder Channels anywhere over a local LAN or the Internet.

The remote control TCPIP access to one Direction Finder Channel is always defined by the

DF Control System / MOXA NPort IP address and the

Local MOXA NPort TCP port

(see chapter: 3.4 Operating Settings and TCP Port No. and the example below)

Example of one DF-Channel Setup with

RHOTHETA DF Remote Control Software “DF Commander”

Example of TCPIP connection

with DF-Channel No. 3

of MOXA device 192.168.77.222

see chapter: 3.4

Operating Settings and TCP Port No.

Please contact your network administrator if necessary.

For additional information, see also www.moxa.com and the MOXA user manual.

RT-1000 MC DF Control System

RHOTHETA Page 5 of 13 Configuration Manual

2 Initial IP Address Configuration

To access the Direction Finder Control System (MOXA NPort) from remote, it is common to

use static IP & Port addresses. For this the MOXA device itself can be configured to a static

IP address or, which is normally the better solution, to configure the router in the local network

with a DHCP reservation to allocate the Direction Finder Control System identified by its MAC

address to a fixed/static IP address.

After delivery, the IP configuration of the MOXA NPort device is set to “DHCP” mode or to the

fixed IP address given in the “IP-Address Configuration” document. If the RT-1000

Multichannel System is connected to your LAN, the actual assigned (DHCP) IP address is

shown after a few seconds at the Front Panel of the MOXA device (small LCM display < >)

and also indicated by the green LED < >.

If there is no DHCP server available or already no LAN connected, the red LED < > is

blinking, and the IP address is set to the standard default value: 192.168.127.254.

LCM Display

Push buttons for manual settings

Menu , ▲, ▼and SEL

Status LED

If no DHCP server is available, or it is intended to use static IP address, it is recommended

using the LCM display < >and the four push buttons < > on the MOXA front panel to

configure the IP address for the first time.

Manual Configuration of static known IP address

Press Menu and ▼… Display shows “Network setting”

Press SEL and ▼+ ▼… Display shows “IP config”

Press SEL and ▲… Display changes from “DHCP” to “Static”

Press SEL … to confirm change

Press ▼Display shows “IP address”

Press SEL … to edit actual static IP address …

Press ▼or ▲to change the blinking digit and SEL to continue with next digit

Press Menu + Menu … Display shows “Save Change?”

Press ▲… Display shows “Yes”

Press SEL to store the settings

The device restarts and the new setting (static IP address) is indicated.

Remark: At the “Network setting” Menu it is also possible to show the actual device MAC

address.

RT-1000 MC DF Control System

RHOTHETA Page 6 of 13 Configuration Manual

3 Web Console Configuration

A standard Web Browser/Console is the most user-friendly method available to configure and

check the actual MOXA NPort device settings and test the RT-1000 network connectivity. You

can use as example Google Chrome or the Microsoft Internet Explorer.

With the exception of custom specific IP address, the MOXA NPort 5600 device

is already correctly pre-configured by RHOTHETA for the use with

the RT-1000 Multichannel direction finder.

… It is strictly not recommended, to change any settings. …,

The following description is just for information and checking the actual settings.

3.1 Opening Your Browser

Open your browser with the cookie function enabled.

Type in the MOXA NPort IP address

The device MAC address is indicated

RT-1000 MC DF Control System

RHOTHETA Page 7 of 13 Configuration Manual

3.2 Network Settings

=

With DHCP configuration, the actual assigned IP address is shown at < >

=

With static configuration, it is possible to change the static IP address at < >

Remark:

Each change of actual settings has to be confirmed with < >

RT-1000 MC DF Control System

RHOTHETA Page 8 of 13 Configuration Manual

3.3 Serial Settings



•Baud rate = 1200

•Data bits = 7

•Stop bits = 1

•Parity = Odd

•Flow control = None

•FIFO = Disable

The settings above are valid and mandatory for all connected DF-Channels.

Remark:

Serial Port 1 is internally connected to DF-Channel No. 1,

Serial Port 2 to DF-Channel No. 2, …

RT-1000 MC DF Control System

RHOTHETA Page 9 of 13 Configuration Manual

3.4 Operating Settings and TCP Port No.



•Operation Mode = TCP Server Mode

•TCP alive check time = 1 (min)

If the connected PC software application crashes or the LAN connection is

interrupted, then the TCP is closed after 1 min automatically and so on no more

“blocking” any new connection.

•Inactivity time = 0 (ms) = Off

Every DF-Channel (with power on) is producing continuously serial data. If there

is no more serial data available, the TCP connection should be hold to show the

correct error status (Interface/TCPIP status=Ok, DF timeout status=Error)

•Max connection = 4

Each DF-Channel can be accessed in parallel by max 4 active remote control

sites.

•Ignore jammed IP = Yes

If one DF-Channel active TCP connection is interrupted, there is no influence to

other still active and connected remote sites working on the same channel.

•Allow driver control = No

RT-1000 MC DF Control System

RHOTHETA Page 10 of 13 Configuration Manual



•Packing length = 0

•Delimiter 1 = “a” and 

each DF-Channel data message ends with …[LF] = 0x0a

•Delimiter 2 = Off

•Delimiter process = Do Nothing

•Force transmit = 0

With the settings above, each RT-1000 DF-Channel serial output data message

is packed within one TCPIP data package.

(Very useful, as example for logging tools like Wireshark)



•Local TCP port = 4001 … 40xx

each DF-Channel is accessed by the MOXA NPort device IP address and

the corresponding port no.

The DF-Channel 1 is accessed by default with port no. 4001,

DF-Channel 2 with port no. 4002, DF-Channel 3 with port no. 4003, …

Example:

Access to DF-Channel:

DF-Channel

No. 1

= 192.168.77.222::4001

DF-Channel

No. 2

= 192.168.77.222::4002

DF-Channel

No. 2

= 192.168.77.222::4002

. . .

Andere Handbücher für NPort 5610 series

Inhaltsverzeichnis

Andere Moxa Technologies Tor Handbücher

Moxa Technologies

Moxa Technologies UC-8580 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies SMG-6100 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3170 Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies Mgate MB3660 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3480 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5135 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies SMG-6100 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5101-PBM-MN Bedienungsanleitung

Moxa Technologies

Moxa Technologies 4101I-MB-PBS-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5118 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5134 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3660-8-2AC Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3150A-LTE-EU-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-301 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate MB3270I Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5111 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5109 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-100 Series Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung