MPI Linkcom 5 Bedienungsanleitung

LinkCom 5 User Manual

How to configure and use LinkCom 5

D13086-002

June 16

LinkCom 5 User Manual

Page 2

LinkCom 5 User Manual

Page 3

Content

1ABOUT MPI TECH ................................................................................................ 6

1.1 Trademarks ................................................................................................ 6

1.2 Contact ...................................................................................................... 6

2INTRODUCTION .................................................................................................. 7

2.1 Terms and definitions ................................................................................... 7

2.2 Related documentation................................................................................. 8

2.3 About this document .................................................................................... 9

2.4 Document history ........................................................................................ 9

3INTRODUCTION TO LINKCOM 5 ........................................................................ 10

3.1 Intention .................................................................................................. 10

3.2 Product features ........................................................................................ 10

3.3 Requirements............................................................................................ 11

3.3.1 PC system requirements ............................................................................... 11

3.3.2 Printer requirements..................................................................................... 11

3.3.3 Host system requirements............................................................................. 11

4FEATURES OF LINKCOM 5 ................................................................................. 13

4.1 Overview of LinkCom 5............................................................................... 13

4.2 End to end control ..................................................................................... 13

5INSTALLATION ................................................................................................. 14

5.1 Installation requirements. ........................................................................... 14

5.2 The LinkCom 5 PrintServer can be hardware connected in 3 different ways:...... 14

5.2.1 Connection via PRT/LAN ports........................................................................ 14

5.2.2 Connect a USB printer .................................................................................. 15

5.2.3 Host2Net connection .................................................................................... 15

5.2.4 General connection setup .............................................................................. 16

6OPERATING LINKCOM 5.................................................................................... 18

6.1 Using test button to print PrintServer configuration........................................ 18

6.2 Using test button to reset PrintServer to factory defaults ................................ 18

6.3 Understanding PrintServer LED signalling...................................................... 19

6.4 LED signalling explained ............................................................................. 19

7CONFIGURING LINKCOM 5 PRINTSERVER ........................................................ 20

7.1 Use of PrintGuide....................................................................................... 20

7.2 Getting started with PrintGuide.................................................................... 20

7.3 Configuring logical printers ......................................................................... 21

7.4 Configuring AFP/IPDS transform .................................................................. 21

7.4.1 PPD ............................................................................................................ 21

7.4.2 IPDS........................................................................................................... 22

7.4.3 Physical Printer ............................................................................................ 24

7.4.4 Strings........................................................................................................ 26

LinkCom 5 User Manual

Page 4

7.4.5 Output driver............................................................................................... 27

7.5 Configuring AFP/ICDS transform.................................................................. 28

7.5.1 PPD ............................................................................................................ 28

7.5.2 PSS ............................................................................................................ 29

7.5.3 Physical Printer ............................................................................................ 30

7.5.4 Strings........................................................................................................ 32

7.5.5 Output driver............................................................................................... 32

7.6 Configuring DCA Transform......................................................................... 33

7.6.1 Telnet Print ................................................................................................. 34

7.6.2 DCA ........................................................................................................... 34

7.6.3 Physical Printer ............................................................................................ 35

7.6.4 Strings........................................................................................................ 37

7.6.5 Output Driver .............................................................................................. 38

7.7 Configuring SCS transform.......................................................................... 39

7.7.1 Telnet Print ................................................................................................. 39

7.7.2 SCS............................................................................................................ 40

7.7.3 Physical Printer ............................................................................................ 41

7.7.4 Strings........................................................................................................ 43

7.7.5 Output Driver .............................................................................................. 44

7.8 Configuring Transparent TCP/IP Printing ....................................................... 45

7.8.1 T Port ......................................................................................................... 46

7.8.2 Physical Printer ............................................................................................ 47

7.8.3 Strings........................................................................................................ 47

7.8.4 Output Driver .............................................................................................. 47

7.9 Printer templates ....................................................................................... 49

7.10 Internal LinkCom 5 web server .................................................................... 49

7.10.1 Accessing the internal web server .................................................................. 49

7.10.2 Status page with Configuration Page. ............................................................. 50

7.10.3 Advanced Configuration ................................................................................ 50

7.10.4 General....................................................................................................... 51

7.10.5 Logical Printers ............................................................................................ 51

7.10.6 TCP/IP section ............................................................................................. 53

7.10.7 Password section ......................................................................................... 54

7.10.8 Logout of web server .................................................................................... 54

7.10.9 Restart PrintServer....................................................................................... 54

7.10.10Restore Factory Default Configuration............................................................. 54

7.10.11Remember to save changes and restart PrintServer ......................................... 55

8CONFIGURATION OF HOST SYSTEMS ................................................................ 56

8.1 Setup in mainframe TCP/IP environment ...................................................... 56

8.2 PSF/MVS AFP/IPDS printing ........................................................................ 56

8.2.1 PSF/MVS start-up procedure.......................................................................... 56

8.3 PSS/MVS AFP/ICDS printing ........................................................................ 56

8.3.1 PSS printer profile using TCP/IP attachment .................................................... 57

8.4 PSS/VM AFP printing using TCP/IP ............................................................... 58

8.4.1 Sample PSS VM printer profile definition using TCP/IP ...................................... 58

8.5 Setup in OS/400 TCP/IP environment ........................................................... 58

LinkCom 5 User Manual

Page 5

8.6 PSF/400 AFP Printing Using TCP/IP .............................................................. 58

8.7 AS/400 / iSeries Settings for Version 3.7, - 7.x ............................................. 59

8.7.1 Creating the PSF configuration....................................................................... 59

8.7.2 Creating the Printer Device Description ........................................................... 60

9SCS/DCA PRINTING USING TN3270E/TN5250E ............................................... 62

9.1 TN3270e setup using OS/390 communication server ...................................... 62

9.1.1 Mainframe TCPIP profile definitions: ............................................................... 62

9.2 TN5250e set-up......................................................................................... 62

9.2.1 Auto-configuration of devices ........................................................................ 63

9.2.2 Manual Configuration of Devices .................................................................... 63

10 LED SIGNALLING EXPLAINED IN DETAILS ........................................................ 67

11 UPDATING FIRMWARE...................................................................................... 70

11.1 How to update firmware ............................................................................. 70

11.2 Updating firmware with PrintGuide............................................................... 70

12 USING PRINTGUIDE TO ADD NEW FEATURES ................................................... 72

12.1 Prerequisites ............................................................................................. 72

12.2 Installing new features ............................................................................... 72

13 ENABLING/DISABLING HIDDEN FEATURES ...................................................... 74

13.1 How to enable/disable options ..................................................................... 74

13.2 Disabling IPv6 and DHCPv6......................................................................... 74

13.3 Test button reset feature ............................................................................ 75

14 CLONING PRINTSERVER SETTINGS .................................................................. 76

15 TROUBLESHOOTING ......................................................................................... 78

15.1 Changes to the output printer address are not applied.................................... 78

15.2 LinkCom 5 hangs during a restart ................................................................ 79

15.3 Not able to see options for Matrix printing..................................................... 79

15.4 Not able to see finishing options in PrintGuide ............................................... 80

15.5 DCA Output language keeps returning to Matrix ............................................ 81

16 INDEX............................................................................................................... 82

LinkCom 5 User Manual

Page 6

1About MPI Tech

The MPI Tech Group is a leading provider of document management and document

output solutions that put the customer in charge. With our software and hardware

solutions we enable customers to create, print, secure, transform, distribute and

archive their information.

Our services run on multiple operating systems making it possible for our

customers to manage all their paper and electronic output through a coherent

software and hardware platform.

The MPI Tech products range from Mainframe and Midrange printing solutions

through Server, Embedded and Stand-alone Hardware based transforms to pure

LAN connectivity. The product range also includes document creation tools and

document management and routing solutions that enables customers to manage

their entire document life cycle from document creation to the documents final

destination whether it is digital or paper.

More information is available at www.mpitech.com

1.1 Trademarks

Company and product names mentioned in this manual are trademarks or

registered trademarks of their respective owners. MPI Tech cannot be held

responsible for any technical or typographical errors and reserves the right to make

changes to products and documentation without prior notification.

1.2 Contact

France

40, rue du Général Malleret Joinville

BP 88 - 94402 Vitry sur Seine Cedex

Phone: +33 (0)1 4573 0940

Fax: +33 (0)1 4680 7071

E-mail: [email protected]

Denmark

Vadstrupvej 35

DK-2880 Bagsvaerd

Phone: +45 4436 6000

E-mail: [email protected]

United Kingdom

Anchor House, 50 High Stret

Bagshot GU19 5AW

Phone: +44 (0)844 800 9803

Fax: +44 (0)1276 452 379

E-mail: [email protected]

Germany

Bavariastrasse 7a

D-80336 Muenchen

Phone: +49 (0)89 35 4762 20

Fax: +49 (0)89 35 4762 11

E-mail: [email protected]

North America - West Coast

4952 Warner Avenue, Suite 301

Huntington Beach, CA 92649-5506

Phone: +1 (714) 840 8077

Fax: +1 (714) 840 2176

E-mail: [email protected]

North America - East Coast

2001 Jefferson Davis Highway, Suite 306

Arlington, VA 22202

Phone: +1 (703) 418 0680

Fax: +1 (703) 418 0684

E-mail: [email protected]

LinkCom 5 User Manual

Page 7

2Introduction

2.1 Terms and definitions

Transform

A conversion from one protocol into another. E.g. the transform from AFP document

type over IPDS data stream into PostScript.

PrintGuide

The Windows application that is used to discover, monitor and configure MPI Tech

PrintServers including LinkCom 5. PrintGuide is also used to backup, modify, and

restore the PrintServer configuration. Feature enablement and software updates are

also applied using PrintGuide.

PrintServer

A device that connects printers to client computers over a network. LinkCom 5 is a

PrintServer, and besides the above description, it can also connect printers with

host systems (AS400, IBM Mainframe, Unix) as well as offer direct TCP/IP port

9100 print from office computers.

Printer definition files

PrintGuide comes preinstalled with predefined printer definition files (*.itc) for

multiple printer models. The files are normally installed in the

“..\MPI Tech\PrintGuide\Printer Descriptions\” subfolder on a computer with

PrintGuide installed. They contain information about trays, duplex-, colour-

capabilities, finishing options, paper sizes and printable area.

In order to use a predefined printer definition file with a LinkCom 5 PrintServer, use

PrintGuide to import the desired printer definition file. This is done from the menu

“PrintServer”, “Upload Configuration”. Change “Files of type” to “Printer

Configuration Template” and browse to the location of the ITC files.

Find and select a suitable printer model definition file. It will be applied to the

selected LinkCom 5 PrintServer.

LinkCom 5 User Manual

Page 8

Please note that in order for Matrix options to appear as available options in

PrintGuide it is necessary to first load a matrix printer definition file via PrintGuide.

Firmware

Firmware is the operating system of LinkCom 5. Firmware can be updated using

PrintGuide.

MPI Tech will make firmware updates available to customers with valid

maintenance. Firmware updates can include new features, improvements, error

corrections and other updates.

Host2Net

Host2Net printing is when the PrintServer and the printer are not directly

connected. Instead the PrintServer receives the print data from the host on the LAN

port and targets the output printer using the LAN port sending the output data back

over the network to the destination printer. In this situation, the PrintServer’s PRT

or USB ports are not used.

Maintenance

Maintenance is a yearly fee paid to MPI Tech that allows for the customer to receive

support for their software and hardware solutions purchased from MPI Tech.

The support can be in the form of written help, remote sessions or the like. Error

corrections can also be in the form of new firmware.

2.2 Related documentation

LinkCom 5 Quick Guide, doc. no.D10600

Getting Started with PrintGuide, doc. no. D60364

Host Print Setup Guide, doc. no. D60425

FSL reference, doc. no. D60313

PSS MVS, Product Installation Guide, doc. no. D13052

PSS VM, Installation Guide, doc. no. D13055

EPM Product Guide, doc. no. D13070

LinkCom 5 User Manual

Page 9

2.3 About this document

The purpose of this manual is to introduce the LinkCom 5 PrintServer, and help the

user setting up the PrintServer to receive host print data from different host

systems and deliver PCL or PostScript or matrix data (Epson or IBM Proprinter) to a

network or USB printer.

The user is expected to be knowledgeable in how to setup host systems to deliver

data to printers and how to initiate print jobs from the specific host system.

This user guide also contains tips and best practices on the host system side for

various host systems.

2.4 Document history

Major changes in this and previous versions of this manual.

Revision D13086-002

Support for automatic discovering of printer connected via USB or PRT port

Web server added

More detailed configuration page

Support for Matrix printing (Epson and IBM Proprinter emulation)

Revision D13086-001

This is the initial document version.

LinkCom 5 User Manual

Page 10

3Introduction to LinkCom 5

Printing host data on an inexpensive LAN- or USB-based printer used to require

expensive hardware and complicated programming in order to eliminate the

incompatibilities between the two environments. Thanks to the LinkCom 5

PrintServer from MPI Tech, your LAN- or USB-connected printer can receive host

print data using any existing standard TCP/IP host attachments.

LinkCom 5 is capable of receiving host print to support either a USB printer or LAN

connected Printer. Using the built-in transparent network switch, the receiving LAN

based printer can be network connected via the LinkCom 5 PrintServer. This can be

a great benefit eliminating the need for an extra network outlet.

The PrintServer comes with a predefined set of print protocols, print transform and

output device according to the hardware license(s).

High speed print options, full colour support and extra transforms require separate

license.

A new feature for LinkCom 5, is support for Gigabit on the LAN side and that both

IPv6 and IPv4 is now supported.

LinkCom 5 converts host print data to a format that is compatible with standard

office printers. Printers can be connected via LAN or USB. LinkCom 5 delivers real-

time conversion that is passed to the printer via the existing LAN or USB

connection.

LinkCom 5 provides conversion of IPDS, ICDS, SCS and DCA host data streams into

PCL5/5c and PostScript languages. Printing to matrix printers using IBM Proprinter

and Epson emulation is also possible with IPDS, SCS and DCA tranforms.

In the basic configuration LinkCom 5 supports one printer session and one ICDS

transform (ICDS to PCL5 or PS). Either one USB printer or one LAN printer. The

LAN printer can either be connected via the LinkCom 5 PRT connector, or reside

elsewhere on the network.

3.1 Intention

This manual describes how to install LinkCom 5, and how to configure the different

features. Please note that some of the features requires additional hardware

licenses.

3.2 Product features

The LinkCom 5 features the following:

TCP/IP session

SCS/DCA with FSL support

IPDS printer emulation (IP40, 4028, 3812, 3816, 4247(matrix))

PCL, PostScript output

Inhaltsverzeichnis

Andere MPI Druckserver Handbücher

MPI

MPI LinkCom V S Bedienungsanleitung

Beliebte Druckserver Handbücher anderer Marken

Digitus

Digitus DN-13003-1 Bedienungsanleitung

Edimax

Edimax PS-1206PWg Bedienungsanleitung

Intellinet

Intellinet 509077 Bedienungsanleitung

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Zonet

Zonet ZPS1000 Bedienungsanleitung

TRENDnet

TRENDnet TEW-P11G Bedienungsanleitung

Axis

Axis 140 BJC Bedienungsanleitung

HP Jetdirect 280m - 802.11b Wireless Print... Bedienungsanleitung

MicroNet

MicroNet SP766W Bedienungsanleitung

NETGEAR

NETGEAR PS104 - Hub - EN Bedienungsanleitung

Axis

Axis AXIS 1610 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Axis

Axis 5600+ Bedienungsanleitung

LevelOne

LevelOne WPS-9123 Bedienungsanleitung

NETGEAR

NETGEAR PS105 Bedienungsanleitung

Xerox

Xerox FreeFlow Print Server V9 SP3 Bedienungsanleitung

SEH

SEH primos Bedienungsanleitung

MPI linkcom 5 Bedienungsanleitung

Beliebte Druckserver Handbücher anderer Marken