MPL MXCS 1548-P1 Bedienungsanleitung
MPL XEON CLASS SERVER 1548-P1
PACKING LIST
1. MXCS 1548-P1 which includes:
1. MXCS Standard Enclosure 66 mm
2. MXCS-1 Ser er Platform with Xeon D-1548 CPU
3. MXCS BMC Module
4. MXCS ETH Module
5. MXCS USB3.0 Module
6. MXCS Serial Module
7. SerifV-1
8. UNIGET-1
9. DDR4 memory (if ordered)
10. Hard dri e(s) (if ordered)
2. MXCS Power Connector Kit
3. Test Certificate
4. Burn-In test protocol
©2017 by MPL AG 1 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
1 OUTLINE AND DIMENSIONS
F gure 1: MXCS 1548-P1 Dimensions
©2017 by MPL AG 2 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
TABLE OF CONTENTS
1 OUTLINE AND DIMENSIONS.........................................................................................2
2 INTRODUCTION.............................................................................................................5
2.1 ABOUT THIS MANUAL......................................................................................................... 5
2.2 SAFETY PRECAUTIONS AND HANDLING..........................................................................5
2.3 ELECTROSTATIC DISCHARGE (ESD) PROTECTION........................................................5
2.4 EQUIPMENT SAFETY...........................................................................................................5
2.5 MANUAL REVISION HISTORY.............................................................................................6
2.6 RELATED DOCUMENTATION...............................................................................................6
3 INTERFACE OVERVIEW................................................................................................7
4 OPERATING CONDITIONS............................................................................................8
4.1 POWER INPUT...................................................................................................................... 8
4.2 POWER DISSIPATION...........................................................................................................8
4.3 ENVIRONMENTAL CONDITIONS.........................................................................................8
5 INTERFACE DESCRIPTION...........................................................................................9
5.1 PUSH BUTTONS AND INDICATOR LEDS............................................................................9
5.1.1 POWER & RESET BUTTON..........................................................................................9
5.1.1.1 Power Button...........................................................................................................................9
5.1.1.2 Reset Button........................................................................................................................... 9
5.1.2 SYSTEM INDICATOR LED'S.........................................................................................9
5.1.2.1 Input Power............................................................................................................................. 9
5.1.2.2 Power...................................................................................................................................... 9
5.1.2.3 Reset.......................................................................................................................................9
5.1.3 ETHERNET INDICATOR LED'S.....................................................................................9
5.1.3.1 Acti ity..................................................................................................................................... 9
5.1.3.2 Speed...................................................................................................................................... 9
5.2 CONNECTOR FRONT......................................................................................................... 10
5.2.1 POWER INPUT............................................................................................................ 10
5.2.2 RS232 SERIAL PORT.................................................................................................. 10
5.2.3 USB 3.0 PORT............................................................................................................. 10
5.2.4 VGA PORT................................................................................................................... 11
5.2.5 IPMI MANAGEMENT PORT.........................................................................................11
5.2.6 ETHERNET PORTS.....................................................................................................11
5.2.7 SFP+ CAGE & SOCKET.............................................................................................. 12
6 COPYRIGHT.................................................................................................................16
7 DISCLAIMER................................................................................................................16
8 TRADEMARKS.............................................................................................................16
9 SUPPORT..................................................................................................................... 16
9.1 FAQs.................................................................................................................................... 16
9.2 SERIAL NUMBER AND REVISION.....................................................................................16
9.3 CONTACTING MPL AG....................................................................................................... 16
©2017 by MPL AG 3 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
TABLE OF FIGURES
Figure 1: MXCS 1548-P1 Dimensions................................................................................................................... 2
Figure 2: MXCS 1548-P1 Connector Front............................................................................................................ 7
Figure 3: Power Input........................................................................................................................................... 10
Figure 4: RS232 Serial Port................................................................................................................................. 10
Figure 5: USB 3.0 Port......................................................................................................................................... 10
Figure 6: VGA Port............................................................................................................................................... 11
Figure 7: IPMI Management Port......................................................................................................................... 11
Figure 8: Ethernet Ports....................................................................................................................................... 11
Figure 9: SFP+ Cage & Socket............................................................................................................................ 12
Figure 10: MXCS 1548-P1 Label......................................................................................................................... 16
©2017 by MPL AG 4 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
2 INTRODUCTION
2.1 ABOUT THIS MANUAL
This Reference, the MXCS Technical Reference Manual and the MXCS BIOS User Manual pro ide information
for handling and configuring the MXCS 1548-P1. Be sure to read these manuals before attempting to use the
MXCS, and keep the manuals close at hand for reference during operation.
This reference is written for advanced techn cal personnel responsible for integrating the MXCS 1548-P1 into
their systems.
While the Tech Ref Manual and the BIOS User Manual contain deeper information about the MXCS mainboard,
contains this Reference an o er iew about the whole ser er unit, including the assembled sub modules.
2.2 SAFETY PRECAUTIONS AND HANDLING
For personal safety and safe operation of the MXCS 1548-P1, follow all safety procedures described here and
in other sections of the manual.
●Remo e power from the system before installing (or remo ing) the MXCS 1548-P1, to pre ent the possibility
of personal injury (electrical shock) and / or damage to the product.
●Handle the product carefully; i.e. dropping or mishandling the MXCS 1548-P1 can cause damage to
assemblies and components.
●Do not expose the equipment to moisture.
2.3 ELECTROSTATIC DISCHARGE (ESD) PROTECTION
Various electrical components within the product are sensiti e to static and electrostatic discharge. E en a small
static discharge can be sufficient to destroy or degrade a component's operation!
Do not touch any electronic components in an open MXCS 1548-P1 housing.
Handle and mount DIMM modules, PCIe and PCIe/104 cards, mSATA or other add-on modules and also cables
to internal connectors only in an ESD protected en ironment.
2.4 EQUIPMENT SAFETY
Great care is taken by MPL AG that all its products are thoroughly and rigorously tested before lea ing the
factory to ensure that they are fully operational and conform to specification. Howe er, no matter how reliable a
product, there is always the remote possibility that a defect may occur.
The occurrence of a defect on this de ice may, under certain conditions, cause a defect to occur in adjoining
and/or connected equipment. It is the customers responsibility to protect such equipment when installing this
de ice. MPL AG accepts no responsibility whatsoe er for such defects, howe er caused.
©2017 by MPL AG 5 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
2.5 MANUAL REVISION HISTORY
Manual
Rev s on
Rev s on
Date Descr pt on
A 10.10.17 •Initial release of this document
2.6 RELATED DOCUMENTATION
Please note, the MXCS Operators Quick Reference contains general information about the whole ser er unit,
including assembled sub modules and used housings. But the MXCS Technical Reference Manual and the
BIOS User Manual contain deeper information about the MXCS mainboard and its function.
The following documents are related to this reference. For detailed Information about a specific MXCS setting or
feature, please see this additional manuals.
Reference Descr pt on Ava lable from
[1] MXCS Technical Reference Manual MEH-10180-001 MPL AG: www.mpl.ch/t5010.html
[1] MXCS BIOS User Manual MPL AG: www.mpl.ch/t5010.html
[2] UNIGET User Manual MPL AG: www.mpl.ch/t2870.html
[3] SerifV User Manual MPL AG: www.mpl.ch/t2b30.html
©2017 by MPL AG 6 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
3 INTERFACE OVERVIEW
F gure 2: MXCS 1548-P1 Connector Front
©2017 by MPL AG 7 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
SFP+
USB Ports
RS232 Serial Ports
Power Input
IPMI Management Port
VGA Port
PWR & RST LED
PWR & RST Button
Ethernet Ports
Ethernet Ports
Input Power LED
4 OPERATING CONDITIONS
4.1 POWER INPUT
Item Spec f cat ons
Input Voltage •24 V +50 %/-20 %
Inrush Current The inrush current depends on parameters that are not MXCS specific, like:
•Power supply internal resistance
•Power supply oltage rise time and oltage alue
•Power cable impedance
Power Up Current •2 A @ 24 V
Protection Circuits •ESD and EMC protected power input
•-36 VDC re erse polarity protection
•150 V load dump protection
4.2 POWER DISSIPATION
The power consumption changes in a wide range according to the needed CPU, memory, graphics and
interfaces usage. Please find some reference alues in the table below:
Power State MXCS 1548-P1
ACPI Soft Off, BMC fully booted 7 W
BIOS Setup Screen 42 W
Win7 Desktop Screen w/o CPU Load 26 W
Win7 w/ Prime95 65 W
Win7 w/ SiSoft Sandra Burn-In Tool 67 W
4.3 ENVIRONMENTAL CONDITIONS
Item Spec f cat ons
Storage Temperature •-45 °C to +85 °C (-49 °F to +185 °F)
Operating Temperature •Depends on cooling solution and air flow.
Relati e Humidity •5% to 95%, non-condensing
Shock and Vibration •TBD
©2017 by MPL AG 8 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
5 INTERFACE DESCRIPTION
5.1 PUSH BUTTONS AND INDICATOR LEDS
5.1.1 POWER & RESET BUTTON
5.1.1.1 Power Button
When pressed shortly the Power Button has the following functions:
•If the system is in standby state this will start up the MXCS 1548-P1.
•If the system is running, a shut down e ent is triggered. Be aware, that the handling of this e ent depends on
the operating system. It may e en be ignored.
A long acti ation (typically more than four seconds) will immediately switch off the power supply.
5.1.1.2 Reset Button
Pressing the Reset Button will immediately cause a system wide reset.
5.1.2 SYSTEM INDICATOR LED'S
5.1.2.1 Input Power
The Input Power LED lights green if the input power oltage is abo e its under oltage le el.
5.1.2.2 Power
The Power LED lights green when the system is running.
While in standby state it lights orange.
Other states, particularly failure states, may be signaled by the Power LED differently. For details please refer to
the respecti e technical documentation.
5.1.2.3 Reset
A system wide reset is signaled when this LED lights red. During normal system operation this LED is unlit.
5.1.3 ETHERNET INDICATOR LED'S
This LEDs are directly placed at the RJ45 connectors.
5.1.3.1 Act v ty
If no link can be detected this LED is permanently off. It lights green if a link is established. Green blinking
signals data acti ity.
5.1.3.2 Speed
The link speed is 1 Gbit/s when the LED lights orange, 100 Mbit/s when it lights green and 10 Mbit/s when the
Speed LED is unlit and the Acti ity LED is on.
©2017 by MPL AG 9 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
5.2 CONNECTORS
5.2.1 POWER INPUT
Connector Type: Conec, 302W2CSXX56N40X.
Counterpart: Conec, 302W2CP with solder contacts 132C10029X and 131C10029X.
Pinout:
P n
S gnal
Descr pt on
P n Ass gnment
A1 VIN_CON Input Power + (24 VNOMINAL)
A2 GND_CON Input Power – (0 V), connected to Case EARTH
F gure 3: Power Input
5.2.2 RS232 SERIAL PORTS
Connector Type: Standard 9 pin Sub-D male connector.
Counterpart: Standard 9 pin Sub-D female connector.
Pinout:
P n
S gnal
Descr pt on
P n Ass gnment
1 DCD Carrier detect
2 RXDn Recei e data
3 TXDn Transmit data
4 DTR Data terminal ready
5 GND Ground
6 DSR Data set ready
7 RTS Request to send
8 CTS Clear to send
9 RI Ring indicator
1 5
9
6
F gure 4: RS232 Serial Port
5.2.3 USB 3.0 PORTS
Connector Type: Standard Type A USB 3.0 socket.
Counterpart: Standard Type A USB 3.0 plug.
Pinout:
P n
S gnal
Descr pt on
P n Ass gnment
1 VCC Cable Power +5 V
2 P- Balanced Data Line -
3 P+ Balanced Data Line +
4 GND Cable Ground
5 USB30_RX- USB3.0 Recei e -
6 USB30_RX+ USB3.0 Recei e +
7 GND Cable Ground
8 USB30_TX- USB3.0 Transmit -
9 USB30_TX+ USB3.0 Transmit +
1 4
59
F gure 5: USB 3.0 Port
©2017 by MPL AG 10 MEH-10180-501 Re . A
High-Tech • Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference
Inhaltsverzeichnis
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung