Luminator Cap Lamp 5
Safety Regulations
GB
1 Safety Regulations
1.1 Correct Use
The Luminator Cap Lamp (hereinafter called device) is a mobile safety light
source. The device is attached on any mine helm, e.g. V-Gard, battery-supplied
with the battery compartment worn on at the belt. The device is designed for all
underground mining, emergency services, security services and maintenance
services.
The device is intended for use by trained and qualified personnel.
It is imperative that this operating manual be read and observed when using the
product. In particular, the safety instructions, as well as the information for the
use and operation of the product, must be carefully read and observed. Further-
more, the national regulations applicable in the user's country must be taken
into account for a safe use.
Alternative use, or use outside this specification will be considered as non-com-
pliance. This also applies especially to unauthorised alterations to the product
and to commissioning work that has not been carried out by MSA or authorised
persons.
1.2 Liability Information
MSA accepts no liability in cases where the product has been used inappropri-
ately or not as intended. The selection and use of the product are the exclusive
responsibility of the individual operator.
Product liability claims, warranties also as guarantees made by MSA with re-
spect to the product are voided, if it is not used, serviced or maintained in ac-
cordance with the instructions in this manual.
Danger!
This product is supporting life and health. Inappropriate use, mainte-
nance or servicing may affect the function of the device and thereby
seriously compromise the user's life.
Before use the product operability must be verified. The product
must not be used if the function test is unsuccessful, it is damaged,
a competent servicing/maintenance has not been made, genuine
MSA spare parts have not been used.
