MSI Micro ATX Bedienungsanleitung
i
Version 1.0
G52-MA00315
MS-6394 (v1.X) Micro ATX Mainboard
MSI
MICRO-STAR INTERNATIONAL
ii
Micro-Star International MS-6394
Tested to comply
with FCC Standard
For Home or Office Use
Manual Rev: 1.0
Release Date: Nov. 2001
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU
RESEAU.
iii
Edition
Nov. 2001
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document,
but no guarantee is given as to the correctness of its contents. Our products
are under continual improvement and we reserve the right to make changes
without notice.
Trademarks
All trademarks used in this manual are the property of their respective owners.
Intel and Pentium are registered trademarks of Intel Corporation.
PS/2 and OS/2 are registered trademarks of IBM Corporation.
Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.
Netware is a registered trademark of Novell.
Award is a registered trademark of Award Software Inc.
Revision History
Revision Revision History Date
V1.0 First release Nov. 2001
iv
1. Always read the safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage or cause electri-
cal shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
zThe power cord or plug is damaged
zLiquid has penetrated into the equipment
zThe equipment has been exposed to moisture
zThe equipment has not work well or you can not get it work according
to User’s Manual.
zThe equipment has dropped and damaged
zIf the equipment has obvious sign of breakage
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED,STORAGETEMPERATUREABOVE600
C(1400F),IT
MAY DAMAGE THE EQUIPMENT.
Safety Instructions
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
v
CONTENTS
Chapter 1. Introduction ............................................................... 1-1
Mainboard Specifications .......................................................... 1-2
Mainboard Layout ..................................................................... 1-5
Quick Components Guide ......................................................... 1-6
Key Features ............................................................................ 1-7
MSI Special Features ................................................................ 1-8
D-LED™ ............................................................................. 1-8
T.O.P Tech™ .................................................................... 1-10
Chapter 2. Hardware Setup ........................................................ 2-1
Central Processing Unit: CPU ................................................... 2-2
CPU Installation Procedures ............................................... 2-2
CPU Core Speed Derivation Procedure ................................ 2-3
CPU Ratio Setting Switch: SW1 ......................................... 2-4
Memory Installation ................................................................... 2-5
Introduction to SDR SDRAM ............................................... 2-5
SDRAM Module Combination .............................................. 2-7
Installing SDRAM Modules ................................................. 2-7
Power Supply ............................................................................ 2-8
ATX 20-Pin Power Connector: JWR1 ................................... 2-8
Back Panel ............................................................................... 2-9
Mouse Connector ................................................................ 2-9
Keyboard Connector ........................................................... 2-9
USB Connectors ............................................................... 2-10
LAN Jacks (RJ-45) ............................................................ 2-10
Parallel Port Connector ..................................................... 2-11
Serial Port Connector: COM A & COM 2 ........................... 2-12
VGA DB 15 Pin Connector ................................................ 2-12
Connectors ............................................................................. 2-13
Floppy Disk Drive Connector: FDD1 .................................. 2-13
vi
Wake On Ring Connector: JMDM1 ................................... 2-13
Hard Disk Connectors: IDE1 & IDE2 ................................. 2-14
IDE RAID Connectors: IDE3 & IDE4 .................................. 2-15
Case Connector: JFP1 ...................................................... 2-16
Fan Power Connectors: CPUFAN1/SFAN1/Power Fan ...... 2-17
I2C Clock/Data Connector: HD THERM1 ........................... 2-18
Serial Connector: JDIP1 .................................................... 2-18
LAN LED Connectors: J2 & J12 ........................................ 2-19
Power Saving Switch Connector: JGLBTN1 ....................... 2-19
Chassis Intrusion Switch Connector: J5 ............................ 2-20
Front USB Connector: JUSB1 ........................................... 2-20
Jumpers .................................................................................. 2-21
Clear CMOS Jumper: JBAT1 ............................................. 2-21
Clock Speed Spectrum Jumper: JSPRD1 .......................... 2-22
VGA Enable/Disable Jumper: J1 ....................................... 2-22
IDE RAID Enable/Disable Jumper: J3 ................................ 2-23
PS2 KB/MS Wake-Up Jumper: J4 .................................... 2-23
LAN Enable/Disable Jumpers: J10 & J11 ........................... 2-24
Slots ....................................................................................... 2-25
PCI Slots .......................................................................... 2-25
Chapter 3. AWARD®BIOS Setup .................................................. 3-1
Entering Setup .......................................................................... 3-2
Control Keys ............................................................................. 3-2
Getting Help .............................................................................. 3-3
The Main Menu ......................................................................... 3-4
Standard CMOS Features ......................................................... 3-6
Advanced BIOS Features .......................................................... 3-8
Advanced Chipset Features .................................................... 3-14
Integrated Peripherals ............................................................. 3-16
vii
Power Management Setup ...................................................... 3-20
PNP/PCI Configurations .......................................................... 3-23
PC Health Status .................................................................... 3-25
Load Fail-Safe/Optimized Defaults .......................................... 3-26
Set Supervisor/User Password ................................................ 3-27
Glossary ........................................................................................ G-1
Introduction
1-1
Chapter 1.
Introduction 1
The MS-6394 V1.X Micro ATX mainboard is a high-performance compu-
ter mainboard based on ServerWorks®LC-T North Bridge & ServerWorks®
CSB5 South Bridge chipsets. The MS-6394 is designed for Intel®Pentium®III
(FC-PGA) processor for cost-effective business/personal desktop and entry-
level server markets.
The ServerWorks®LC-T chipset provides an integrated high-perform-
ance main memory sub-system, a dual channel PCI bus bridge that provides an
excellent data flow path between the processor bus and a 64-bit PCI bus/the
processor and a 32-bit PCI bus. The DRAM interface provides support for 64-
Mbit, 128 and 256Mbit technology, which will allow up to 128/256/512 Mbytes
per two rows (Double Sided DIMM) and a maximum memory size of 2GB. It also
implements I2C interface, which can be used to access the internal registers.
The ServerWorks®CSB5 chipset primarily works as a PCI to Low Pin
Count (LPC) Bridge and is also a source of numerous other integrated functions.
Its main features are: PCI-LPC address/data bridge, DMA controller, IDE (up to
ATA100) & IDE RAID interfaces, ACPI, USB controller, SMBus host and slave
interface,...and etc.
This chapter includes the following topics:
Mainboard Specifications 1-2
Mainboard Layout 1-5
Quick Components Guide 1-6
Key Features 1-7
MSI Special Features 1-8
Chapter 1
1-2
Mainboard Specifications
CPU
zSupport Single Socket370 for Intel®Coppermine / Tualatin processors.
zSupport up to 1.26GHz at 133MHz FSB
Chipset
zServerWorks®LC-T chipset
- 100/133MHz Host Bus Interface
- Main memory interface with optimized support for PC100/PC133 SDRAM
- 32-bit, 33MHz Primary PCI Bus Interface
- 64-bit, 33/66MHz Secondary PCI Bus Interface
- Extensive Data Buffering between all interfaces for high throughput and
concurrence.
- Dual parallel memory controller support
- I2C bus support
zServerWorks®CSB5 chipset
- PCI to LPC (Low Pin Count) address/data bridge
- Supports EISA type A & B DMA cycle to PCI or main memory
- IDE interface (bus master capability and support for ATA66/100)
- ACPI (Advanced Configuration and Power Interface)
- Universal Serial Bus controller/root hub with 4 USB ports
- SMBus (System Management Bus) host and slave interface
Clock Generator
z100MHz and 133MHz clocks are supported.
Main Memory
zSupport Two 3.3 volt, 168-pin registered DIMM (25-degree sockets) PC100
or PC133
zSupport 16/64/128/256Mbit technology
zUp to 2 GB ECC registered SDRAM
zNote: Supports only registered ECC memory. Non-ECC or unbuffered SDRAM
not supported.
Slots
zTwo 32-bit, 33MHz PCI Bus Master Slots (support 3.3v/5v PCI bus Interface)
zOne 3.3v 64-bit, 33/66MHz PCI Bus Master Slot
Introduction
1-3
On-Board IDE
zAn IDE controller on the CSB5 chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA33/66/100 operation modes.
zCan connect up to four fast IDE drives
zATA RAID 0.1 supported by Promise PDC20265R IDE RAID controller.
On-Board Peripherals
zOn-Board Peripherals include:
- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M,
1.44M and 2.88Mbytes.
- 1 serial port (COMA)
- 1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (Rear * 2 / Front * 2)
- 1 VGA port
- 2 LAN RJ45 Jacks
- 1 COM2 serial pin header
Network
zDual Intel®82550 LAN Controllers
- Integrated IEEE802.3 10-BaseT & 100-BaseTX PHY
- Wake-On-LAN and WFM 2.0 Supported (ET/EM)
- Integrated IP Security (IPSec) encryption off-load engine
Video
zIntegrated ATI Rage XL graphics controller
zSupport 3D acceleration
zBuilt-in DVD decoding
zOnboard 4MB Video SDRAM
BIOS
zSupports ACPI (Advanced Configuration and Power Interface) and APM
(Advanced Power Management)
zSlow blinking LED for Sleep State indicator
zMain switch override mechanism. Power-up mode control upon recovery
from AC power loss
zPC Health Monitoring protects your system from problems even before
they occur.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere MSI Hauptplatine Handbücher
MSI
MSI H61MU-E35 series Bedienungsanleitung
MSI
MSI TX98 Bedienungsanleitung
MSI
MSI MS-6163VA Bedienungsanleitung
MSI
MSI K9AG Neo2-Digital Bedienungsanleitung
MSI
MSI B460M PRO-VDH WIFI Bedienungsanleitung
MSI
MSI A55-G35 Series Bedienungsanleitung
MSI
MSI 915G Neo3-FIR Bedienungsanleitung
MSI
MSI MAG Z590 TORPEDO Bedienungsanleitung
MSI
MSI B450 TOMAHAWK MAX Bedienungsanleitung
MSI
MSI H81M-P33 Series Bedienungsanleitung
MSI
MSI B350 PC MATE Bedienungsanleitung
MSI
MSI K9N2 Diamond Series Bedienungsanleitung
MSI
MSI IA-Q45 Bedienungsanleitung
MSI
MSI H510I PRO WIFI Bedienungsanleitung
MSI
MSI K7 Master MS-6341 Bedienungsanleitung
MSI
MSI 945PL Neo5 Series Bedienungsanleitung
MSI
MSI MEG Z690 ACE Bedienungsanleitung
MSI
MSI MS-6339 Bedienungsanleitung
MSI
MSI A320MBAZOOKA Bedienungsanleitung
MSI
MSI 865PE Neo2-P Platinum Edition Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
