MSI MS-6163VA Bedienungsanleitung

CHAPTER 1 INTRODUCTION

1-1

The MS-6163VA ATX VIA mainboard is a high-performance personal

computer mainboard based on the Intel®Pentium®II processor. The Intel®

Pentium®II processor supports MMXTM (Multimedia Extension) technology.

The mainboard uses the highly integrated VIA®VT82C693 chipset to

support the PCI/ISA and Green standards, and to provide the Host/AGP

bridge. TheVIA®VT82C596A chipset integrates all system control functions

such as ACPI (Advanced Configuration and Power Interface). The ACPI

provides more Energy Saving Features for the OSPM(OS Direct Power

Management) function. The VIA®VT82C596A chipset also improves the

IDE transfer rate by supporting Ultra DMA/33 IDE that transfers data at the

rate of 33MB/s.

Chapter 1

INTRODUCTION

CHAPTER 1 INTRODUCTION

1-2

1.1 Mainboard Features

CPU

lSlot 1 for Intel®Pentium®II/Pentium®III/CeleronTM processor.

lSupports233MHz,266MHz,300MHz,333MHz,350MHz,400MHz,

450MHz,500MHzand faster.

Chipset

lVIA®VT82C693chipset

FSB(FrontSideBus)

l66.6MHz, 100MHz and faster clocks are supported.

MainMemory

lSupports six memory banks using three 168-pin unbuffered DIMM.

lSupportsamaximum memory sizeof384MB (8M x8) or 768MB (16Mx 4)

registered DIMM only.

lSupportsECC(1-bit Error Code Correct) function.

lSupports 3.3v SDRAM DIMM.

Slots

lOne AGP slot.

- AGP specification compliant

- AGP66/133MHz 3.3v device support

lFive 32-bit Master PCI Bus slots and two 16-bit ISA Bus slots (wherein

one slot is shared).

*See Chapter 2-48 for further details on PCI slots.

lSupports 3.3v/5v PCI bus Interface.

On-BoardIDE

lAn IDE controller on the Intel®PIIX4E PCI Chipset provides IDE HDD/

CD-ROM with PIO, Bus Master and Ultra DMA/33 operation modes.

lCan connect up to four IDE devices.

CHAPTER 1 INTRODUCTION

1-3

On-BoardPeripherals

lOn-BoardPeripherals include:

-1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

-2 serial port (COM A) + (COM B)

- 1 parallel port supports SPP/EPP/ECP mode

- 2 USB ports

- 1 IrDA connector

- 1 Audio port ( Line_Out, Line_In, and Mic_In Jack) and 1 MIDI/

GamePort

Audio (Optional)

lCreative®ES1373

-Running on PCI BUS.

-64 Voice and AC3 Capable

- Support Direct Sound and Direct Sound 3D

-AC97’Compliant

- Support SPDIFTM output

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications.

lACPI(Advanced Configuration and Power Interface) feature.

Dimension

lATXForm Factor : 30cm(L)x19.2cm(W) x 4layersPCB

Mounting

l6 mounting holes.

CHAPTER 1 INTRODUCTION

1-4

OtherFeatures

lKeyboard Password Wake-Up

lLAN Wake-Up

lInternal/External Modem Wake-Up

CHAPTER 1 INTRODUCTION

1-5

1.2 Mainboard Layout

MS-6163VA ATX VIA Mainboard

PCI SLOT 3

PCI SLOT 2

PCI SLOT 1

ISA SLOT 2

ATX

Power Supply

VT82C693

SLOT 1

DIMM 2

Top: Mouse

Bottom:

Keyboard

Top:Port1

USB

DIMM 1

IDE2

Bottom:

Port2

IDE1

FDD

VT82C596A

JMDM1 JFP

JGS1

JBAT1

BIOS

JPHONE:MDM_IN

JAUX: AUX_IN

CPUFAN

JSOR1

JRMS1

PSFAN

BATT

Top: LPT

Bottom:

COM1/

COM2

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

JCD: CD_IN

SW2

JKBV

System

Hardware

Monitor

(optional)

AGP SLOT

JCASE

DIMM 3

PCI SLOT 4

PCI SLOT 5

ISA SLOT 1

JWOL1

SYSFAN

WINBOND

W83977EF-AW

SB_Link

JT3

Creative

ES1373

(Optional)

CHAPTER 2 HARDWARE INSTALLATION

2-1

Chapter 2

HARDWARE INSTALLATION

2.1 Central Processing Unit: CPU

This mainboard operates with Intel®Pentium®II/CeleronTM processor. The

mainboard uses a CPU Slot called Slot 1 for easy CPU installation. The CPU

should always have a Heat Sink and a cooling fan attached to prevent

overheating.

CHAPTER 2 HARDWARE INSTALLATION

2-2

2.1-1 CPU Installation Procedures

A. OEM Pentium®II Processor Installation Procedures

Different kinds of Pentium®II processor that is currently used: the OEM

version, the Boxed version, and CeleronTM. OEM Pentium®II Processor has

no Heat Sink, Fan and Heat Sink Support, the Boxed Pentium®II Processor

is provided with Heat Sink w/ fan and Heat Sink Support, while the

CeleronTM processor is a plain processor card without cover or heatsink.

Required Things:

Pentium®IIprocessor-Processor.

*RetentionMechanism(RM)- Plastic Guide that holds the S.E.C. Catridge

in the Slot 1 connector.

*RetentionMechanismAttachMount(RMAM) -Bolt/Bridgeassemblies

inserted up through the bottom of the

motherboard. RM secures to RMAM ( 2

RMAM required per RM ).

*Heat Sink SupportBase (HSSBASE) - Plastic support bar mounted to

the mainboard under the ATX heatsink.

(One leg is always bigger than the other one)

Processor

Lock

Retention

Mechanism

Pentium®II

Processor

Heat Sink

W/Fan

Notch Hole

Heat Sink

Support Base Heat Sink

Support Pin

Heat Sink

Support

Top Bar

CHAPTER 2 HARDWARE INSTALLATION

2-3

*HeatSink Support Pin (HSSPIN) - Plastic pins inserted through the

HSSBASE to secure it to the mainboard (2

required per Assembly).

*Heat Sink Support TopBar (HSSTOP) - Plastic bar that clips onto the

HSSBASE through the fins on the ATX

heatsink.

**Heat Sink w/ fan - Heat Sink that can be attached to the Pentium®II

processorwith metal clip.

Note:* Provided by MSI mainboard.

** Provided by Special request.

HSSPIN

HSSTOP

HSSBASE

RMAM

CHAPTER 2 HARDWARE INSTALLATION

2-4

SLOT1

Retention

Mechanism

êê

Key

êê

Retention

Mechanism

Attach Mount

Notch

Key

Step 1: Insert the Retention Mechanism Attach Mount at the bottom

of the mainboard.

Step 2: Install the Retention Mechanism.

Look for the key on Slot 1, and match it with the Notch Key on the

Retention Mechanism for proper direction. Then, attach the

Retention Mechanism to the Retention Mechanism Attach Mount.

Use a Screwdriver to secure the Retention Mechanism.

CHAPTER 2 HARDWARE INSTALLATION

2-5

Step 3: Install the Heat Sink Support Base.

Look for the Two holes across Slot 1, and match it with the Two legs

of the Heat Sink Support Base for the proper direction. Take note

that one hole/leg is bigger than the other. The Four top pins of the

Heat Sink Support Base should also be oriented towards Slot 1.

Push the Heat Sink Support Base onto the mainboard, until you hear

a click sound. Check for a perfect fit.

Step 4: Install the Heat Sink Support Pin.

Push the Heat Sink Support Pins onto the two holes of the Heat Sink

Support Base. Check for a perfect fit. These pins are used to secure

the Heat Sink Support Base.

Heat Sink

Support Base

Heat Sink

Support Pin

Leg

pins

Andere MSI Hauptplatine Handbücher

MSI

MSI MS-7395 Bedienungsanleitung

MSI

MSI MS 6760 Bedienungsanleitung

MSI

MSI K7N2 Delta2 - Motherboard - ATX Bedienungsanleitung

MSI

MSI G52-M7246X1 Bedienungsanleitung

MSI

MSI G31TM-P21 - Motherboard - Micro ATX Bedienungsanleitung

MSI

MSI TRX40 PRO 10G Bedienungsanleitung

MSI

MSI MS-7646M1 Bedienungsanleitung

MSI

MSI MEG X670E ACE Bedienungsanleitung

MSI

MSI MAG Z490 TOMAHAWK Bedienungsanleitung

MSI

MSI K8MM-V Bedienungsanleitung

MSI

MSI MS-6791 Bedienungsanleitung

MSI

MSI Z270 PC MATE Bedienungsanleitung

MSI

MSI PRO Z790-A WIFI Bedienungsanleitung

MSI

MSI MS-6580 Bedienungsanleitung

MSI

MSI 3200 Master Series Bedienungsanleitung

MSI

MSI X370 XPOWER GAMING TITANIUM Bedienungsanleitung

MSI

MSI B460M PRO Bedienungsanleitung

MSI

MSI K9AGM4 Bedienungsanleitung

MSI

MSI A68HM-E33 Series Bedienungsanleitung

MSI

MSI 645 Ultra Bedienungsanleitung

MSI

MSI MEG X570S ACE MAX Bedienungsanleitung

MSI

MSI PRO Z790-S WIFI Bedienungsanleitung

MSI

MSI K9NGM4 Series Bedienungsanleitung

MSI

MSI K8MM3 Series Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung