MSI MS-6551 Bedienungsanleitung

Version 1.0

G52-MA00484

MS-6551(v1.X) ATX Mainboard

MSI

MICRO-STAR INTERNATIONAL

Manual Rev: 1.0

Release Date: Nov. 2001

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU

RESEAU.

Micro-Star International MS-6551

Tested to comply

with FCC Standard

For Home or Office Use

iii

Edition

Nov 2001

The material in this document is the intellectual property of MICRO-

STAR INTERNATIONAL. We take every care in the preparation

of this document, but no guarantee is given as to the correctness of its

contents. Our products are under continual improvement and we re-

serve the right to make changes without notice.

Trademarks

All trademarks used in this manual are the property of their respective

owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

Revision History

Revision Revision History Date

V1.0 First release for PCB 1.X Nov. 2001

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening that could damage or cause electri-

cal shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

zThe power cord or plug is damaged

zLiquid has penetrated into the equipment

zThe equipment has been exposed to moisture

zThe equipment has not work well or you can not get it work according

to User’s Manual.

zThe equipment has dropped and damaged

zIf the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED,STORAGETEMPERATUREABOVE600

C(1400F),IT

MAY DAMAGE THE EQUIPMENT.

Safety Instructions

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer.

CONTENTS

Chapter1.GettingStarted ........................................................................ 1-1

Mainboard Specification ......................................................................1-3

Mainboard Layout ...............................................................................1-5

Quick Components Guide ....................................................................1-5

Chapter2.HardwareSetup ....................................................................... 2-1

Central Processing Unit: CPU ..............................................................2-2

CPU Installation Procedures ......................................................... 2-2

Installing the CPU Fan ..................................................................2-3

CPU Core Speed Derivation Procedure .........................................2-4

Memory................................................................................................2-5

Introduction to DDR SDRAM.......................................................2-5

DDR Module Combination ............................................................ 2-6

DDR Module Installation Procedure ............................................. 2-6

Power Supply .......................................................................................2-7

ATX 20-Pin Power Supply ............................................................. 2-7

ATX 12V Power Connector: JPW1 ................................................2-7

BackPanel ............................................................................................2-8

Mouse Connector ......................................................................... 2-8

Keyboard Connector .....................................................................2-9

USB Connectors ............................................................................2-9

Serial Port Connectors: COM A & COM B.................................. 2-10

Joystick/Midi Connectors ........................................................... 2-10

Audio Port Connectors ............................................................... 2-10

Parallel Port Connector ................................................................ 2-11

LANJack(RJ-45) ......................................................................... 2-12

Connectors......................................................................................... 2-13

Floppy Disk Drive Connector: FDD1........................................... 2-13

CD-IN1/MDM_IN1/AUX_IN1Connectors................................. 2-13

Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-14

Fan Power Connectors: CPU_FAN/CHS_FAN/BAK_FAN......... 2-15

Wake On Ring Connector: JMDM1............................................. 2-16

Wake On LAN Connector: JWOL1.............................................. 2-16

Power Saving Switch Connector: JGS1........................................ 2-17

PowerSavingLEDConnector: JGLED1 ....................................... 2-17

Front Panel Connector: F_P1....................................................... 2-18

Front Panel Audio Connector: JAUDIO1 .................................... 2-20

Front USB Connectors: USB1 ..................................................... 2-21

IrDA Infrared Module Header: IR1 .............................................. 2-22

Jumpers .............................................................................................. 2-23

Clear CMOSJumper: JBAT1 ........................................................ 2-23

BIOS Flush Jumper: J3 ................................................................. 2-24

Onboard Audio Jumper: JP2........................................................ 2-24

Slots ................................................................................................... 2-25

AGP (Accelerated Graphics Port) Slot......................................... 2-25

PCI Slots ...................................................................................... 2-25

CNR(CommunicationNetworkRiser) ......................................... 2-26

PCI Interrupt Request Routing .................................................... 2-26

Chapter3.BIOS Setup.............................................................................. 3-1

Entering Setup......................................................................................3-2

Control Keys ................................................................................. 3-2

Getting Help ..................................................................................3-3

The Main Menu ...................................................................................3-4

Standard CMOS Features ....................................................................3-6

Advanced BIOS Features ....................................................................3-8

Advanced Chipset Features............................................................... 3-11

Integrated Peripherals ........................................................................ 3-13

Power Management Setup ................................................................. 3-17

PNP/PCI Configurations..................................................................... 3-21

vii

PC Health Status ................................................................................ 3-23

Frequency/Voltage Control ................................................................ 3-24

LoadFail-Safe/Optimized Defaults ..................................................... 3-26

Supervisor/User Password................................................................. 3-28

Getting Started

1-1

Chapter 1. Getting Started 1

Getting Started

Thank you for purchasing the MS-6551 v1.0 ATX mainboard. The MS-

6551 v1.0 is based on Intel®Brookdale & ICH2 chipsets for optimal system

performance. Designed to fit the advanced Intel®Pentium®4 processors in the

478 pin package, the MS-6551 v1.0 provides you with an ideal and professional

desktop platform solution.

TOPICS

Mainboard Specification 1-2

Mainboard Layout 1-4

Quick Components Guide 1-5

Chapter 1

1-2

CPU

Support Socket478 for Intel®Pentium 4 processor

Support 1.3GHz, 1.4GHz and up to 2.XGHz

Chipset

Intel®Brookdale chipset

- AGP 4x universal slot

- Support 100MHz FSB

- Support 400MHz Intel NetBurst micro-architecture bus.

Intel®ICH2 chipset. (360 BGA)

- AC’97 Controller Integrated

- 2 full IDE channels, up to ATA100

- Integrated 10/100Mbit/sec Ethernet

- Low pin count interface for Winbond SIO

MainMemory

Support two 184-pin DDRs.

Max. memory size at 2GB.

Slots

One CNR(Communication Network Riser).

One AGP(Accelerated Graphics Port) 4x slot.

Five PCI 2.2 32-bit Master PCI Bus slots.

Support 3.3v/5v PCI bus Interface.

One ISA slot (optional)

On-BoardIDE

An IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with

PIO, Bus Master and Ultra DMA66/100 operation modes.

Can connect up to four IDE devices

Mainboard Specification

Note: The AGP slot DOES NOT support 3.3V AGP card. Use of

3.3V AGP card may cause damage to the mainboard.

Getting Started

1-3

On-Board Peripherals

On-Board Peripherals include:

- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M,

1.44M and 2.88Mbytes.

- 2 serial ports (COMA & COMB)

- 1 parallel port supports SPP/EPP/ECP mode

- 4 USB ports (Rear * 2 / Front * 2)

- 1 RJ45 Connector (optional)

- 1 Line-In/Line-Out/Mic-In/Game port

Network

ICH2 Integrated LAN Controller

Intel 82562 ET/EM (optional)

Audio

ICH2 chip integrated

AC97 2.1 Compliant.

Support 2 Channel Audio

BIOS

The mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

The mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications.

Dimension

ATX Form Factor (9.6” x 9.05”)

Mounting

6 mounting holes.

Inhaltsverzeichnis

Andere MSI Hauptplatine Handbücher

MSI

MSI MPG B650I EDGE WIFI Bedienungsanleitung

MSI

MSI B460M PRO-VDH WIFI Bedienungsanleitung

MSI

MSI A75MA-P35 series Bedienungsanleitung

MSI

MSI K9N Neo V3 Series Bedienungsanleitung

MSI

MSI B450M BAZOOKA Bedienungsanleitung

MSI

MSI MEG Z690 UNIFY-X Bedienungsanleitung

MSI

MSI MS-6137 Bedienungsanleitung

MSI

MSI P4M900M3-L Bedienungsanleitung

MSI

MSI B450M BAZOOKA V2 Bedienungsanleitung

MSI

MSI 785GT-E63 Series Bedienungsanleitung

MSI

MSI J-TX98 R2 Bedienungsanleitung

MSI

MSI Z170A KRAIT GAMING Bedienungsanleitung

MSI

MSI MS-6120 Bedienungsanleitung

MSI

MSI 915GM Speedster MS-9625 Bedienungsanleitung

MSI

MSI G31M3-F - Motherboard - Micro ATX Bedienungsanleitung

MSI

MSI H310-A PRO Bedienungsanleitung

MSI

MSI K8MM-ILSR Bedienungsanleitung

MSI

MSI MS-7345 Bedienungsanleitung

MSI

MSI 970A-G46 Series Bedienungsanleitung

MSI

MSI X99A GAMING 7 Bedienungsanleitung

MSI

MSI 945PL Neo Series Bedienungsanleitung

MSI

MSI 865PE/G Neo2-P MS-6728 Bedienungsanleitung

MSI

MSI KM3M-V Series Bedienungsanleitung

MSI

MSI MAG X570S TORPEDO MAX Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung