MSI MS-6558/G Bedienungsanleitung

Version 1.0

G52-MA00491

MS-6558/G (v1.X) Micro ATX Mainboard

MSI

MICRO-STAR INTERNATIONAL

Micro-Star International MS-6558/G

Tested to comply

with FCC Standard

For Home or Office Use

Manual Rev: 1.0

Release Date: Nov. 2001

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU

RESEAU.

iii

Edition

Nov. 2001

The material in this document is the intellectual property of MICRO-

STAR INTERNATIONAL. We take every care in the preparation

of this document, but no guarantee is given as to the correctness of its

contents. Our products are under continual improvement and we re-

serve the right to make changes without notice.

Trademarks

All trademarks used in this manual are the property of their respective

owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

Revision History

Revision Revision History Date

V1.0 First release Nov. 2001

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening that could damage or cause electri-

cal shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

zThe power cord or plug is damaged

zLiquid has penetrated into the equipment

zThe equipment has been exposed to moisture

zThe equipment has not work well or you can not get it work according

to User’s Manual.

zThe equipment has dropped and damaged

zIf the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED,STORAGETEMPERATUREABOVE600

C(1400F),IT

MAY DAMAGE THE EQUIPMENT.

Safety Instructions

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer.

CONTENTS

Chapter 1. Getting Started ........................................................................ 1-1

Mainboard Specification ...................................................................... 1-2

Mainboard Layout ............................................................................... 1-4

Quick Components Guide .................................................................... 1-5

Chapter 2. Hardware Setup ....................................................................... 2-1

Central Processing Unit: CPU .............................................................. 2-2

CPU Installation Procedures ......................................................... 2-2

Installing the CPU Fan .................................................................. 2-3

CPU Core Speed Derivation Procedure ......................................... 2-4

Memory ................................................................................................ 2-5

Introduction to DDR SDRAM ....................................................... 2-5

DDR Module Combination ............................................................ 2-6

Installing DDR Modules ............................................................... 2-6

Power Supply ....................................................................................... 2-7

ATX 20-Pin Power Connector: JWR1 ............................................ 2-7

ATX 12V Power Connector: JPW1 ................................................ 2-7

Back Panel ............................................................................................ 2-8

Mouse Connector: JKBMS1 ......................................................... 2-8

Keyboard Connector: JKBMS1 ..................................................... 2-9

USB Connectors ............................................................................ 2-9

Serial Port Connector: COM A & COM B ................................... 2-10

VGA DB 15 Pin Connector .......................................................... 2-10

Joystick/Midi Connectors ........................................................... 2-11

Audio Port Connectors ............................................................... 2-11

LAN Jack (RJ-45) ......................................................................... 2-11

Parallel Port Connector: LPT1 ...................................................... 2-12

Connectors ......................................................................................... 2-13

Floppy Disk Drive Connector: FDD1 ........................................... 2-13

Chassis Intrusion Switch Connector: J8 ...................................... 2-13

Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-14

CD-In Connector: JCD1 ............................................................... 2-15

Aux Line-In Connector: JAUX1 .................................................. 2-15

Modem-In Connector: JMD1 ....................................................... 2-15

Fan Power Connectors: CPUFA/SYSFA ...................................... 2-16

Front Panel Connector: JFP1 or JFP2 ........................................... 2-17

Front Panel Audio Connector: JAUD1 ........................................ 2-18

Front USB Connectors: JUSB1 or JUSB2 .................................... 2-20

IrDA Infrared Module Header: JIR1 ............................................ 2-21

Jumpers .............................................................................................. 2-22

Clear CMOS Jumper: JBAT1 ........................................................ 2-22

Slots ................................................................................................... 2-23

AGP (Accelerated Graphics Port) Slot ......................................... 2-23

PCI Slots ...................................................................................... 2-23

CNR (Communication Network Riser) ......................................... 2-23

PCI Interrupt Request Routing .................................................... 2-24

Chapter 3. BIOS Setup .............................................................................. 3-1

Entering Setup ...................................................................................... 3-2

Control Keys ................................................................................. 3-2

Getting Help .................................................................................. 3-3

The Main Menu ................................................................................... 3-4

Standard CMOS Features .................................................................... 3-6

Advanced BIOS Features .................................................................... 3-8

Advanced Chipset Features ............................................................... 3-12

Integrated Peripherals ........................................................................ 3-14

Power Management Setup ................................................................. 3-19

PNP/PCI Configurations ..................................................................... 3-23

PC Health Status ................................................................................ 3-25

vii

Frequency/Voltage Control ................................................................ 3-26

Load Fail-Safe/Optimized Defaults ..................................................... 3-28

Set Supervisor/User Password ........................................................... 3-29

Glossary .................................................................................................... G-1

Getting Started

1-1

Chapter 1. Getting Started

Thank you for purchasing the MS-6558/G v1.X Micro ATX mainboard.

The MS-6558/G consists of two superior computer mainboards: MS-6558 &

MS-6558G. The MS-6558 is based on SiS645 HMAL & the MS-6558G is based

on SiS650 IGUI HMAL for optimal system efficiency. Designed to fit the ad-

vanced Intel®Pentium®4 processors in the 478 pin package, the MS-6558/G

delivers a high performance and professional desktop platform solution.

Getting Started

TOPICS

Mainboard Specification 1-2

Mainboard Layout 1-4

Quick Components Guide 1-5

Chapter 1

1-2

CPU

Supports Intel®Pentium®4 processors in the 478 pin package.

Supports 1.5GHz, 1.6GHz, 1.7GHz, 1.8GHz, 1.9GHz, 2GHz and up.

Chipset

SiS®645/650 HMAL/IGUI HMAL (702-pin BGA)

- High performance host interface (400MHz).

- 64 bit performance DDR333/DDR 266/PC 133 memory controller.

- Integrated A.G.P compliant target/66MHz Host-to-PCI bridge.

- High throughput SiS HyperZip connect to SiS 961 HyperZip Media I/O.

- Dedicated isochronous response queue.

- High performance 2D/3D and video accelerator (SiS650 only).

- Complete TV-Out/Digital Flat Panel solution and MPEG-2/1 video decoder

(SiS650 only).

SiS®961 HyperZip Media I/O (371-pin BGA)

- High performance HyperZip connect to SiS series NB.

- Integrated multi-threaded I/O link ensures concurrency of up/down data

transfer.

- Integrated HyperZip connect to PCI bridge.

- Dual IDE Master/Slave controller.

- Integrated USB host controller Fast Ethernet MAC controller.

- Integrated audio controller with AC97 interface.

- Advanced power management and PC2001 compliance.

- Integrated RTC and DMA interrupt and keyboard controller.

- Integrated PCI to LPC bridge.

MainMemory

Supports four memory banks using two 184-pin unbuffered DDR DIMM.

Supports up to 2GB memory size.

Supports 2.5v DDR SDRAM.

Slots

One AGP (Accelerated Graphics Port) 4X slot (1.5V only).

Three PCI 2.2 32-bit PCI bus slots (support 3.3V/5V PCI bus interface).

One CNR (Communication Network Riser) slot.

Mainboard Specification

Getting Started

1-3

On-BoardIDE

An IDE controller on the SiS961 chipset provides IDE HDD/CD-ROM with

PIO, Bus Master and Ultra DMA100/66/33 operation modes.

Can connect up to four IDE devices.

On-Board Peripherals

On-Board Peripherals include:

- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

- 2 serial ports (COM A + COM B).

- 1 parallel port supports SPP/EPP/ECP mode.

- 4 USB ports (Rear * 2/ Front * 2).

- 1 IrDA connector for SIR.

- 1 RJ-45 LAN jack (optional).

- 1 audio/game port.

- 1 VGA port (for SiS 650 only).

Audio

AC97 link controller integrated in SiS 961.

2-channel software audio codec RealTek ALC201A/202A.

- Compliance with AC97 v2.2 Spec.

- Meet PC2001 audio performance requirement.

LAN (optional)

PCI local bus single-chip Fast Ethernet Controller, RealTek RTL8100L/BL.

- Integrated Fast Ethernet MAC and PHY in one chip.

- Supports 10Mb/s and 100Mb/s auto-negotiation operation.

- Compliance with PCI v2.2/PC99 standard.

- Supports Wake-On-LAN and remote wake-up.

- Supports ACPI power management.

BIOS

2Mb Award/AMI BIOS with PnP, ACPI, SMBIOS 2.3, Green and Boot Block.

Provides DMI2.0, WfM2.0, WOL, WOR, chassis intrusion, and SMBus for

system management.

Dimension

Micro ATX Form Factor: 9.6” x 9.1”.

Mounting

6 mounting holes.

Inhaltsverzeichnis

Andere MSI Hauptplatine Handbücher

MSI

MSI MAG B660 TOMAHAWK WIFI Bedienungsanleitung

MSI

MSI 890GXM Bedienungsanleitung

MSI

MSI X99A GAMING PRO CARBON Bedienungsanleitung

MSI

MSI FM2-A85XMA-E35 Series Bedienungsanleitung

MSI

MSI 970A-G45 series Bedienungsanleitung

MSI

MSI MS-7226 (V1.X) Bedienungsanleitung

MSI

MSI G41M series Bedienungsanleitung

MSI

MSI MAG B550 TOMAHAWK Bedienungsanleitung

MSI

MSI MPG Z490 GAMING EDGE WIFI Bedienungsanleitung

MSI

MSI MS-772 v6.X Bedienungsanleitung

MSI

MSI 970A-G43 PLUS Bedienungsanleitung

MSI

MSI K9A PLATINUM - Motherboard - ATX Bedienungsanleitung

MSI

MSI B350M MORTAR Bedienungsanleitung

MSI

MSI G31TM-P21 - Motherboard - Micro ATX Bedienungsanleitung

MSI

MSI MEG Z590 ACE Bedienungsanleitung

MSI

MSI K8N Diamond Plus Bedienungsanleitung

MSI

MSI A88X-G45 GAMING Bedienungsanleitung

MSI

MSI A320M PRO-E Bedienungsanleitung

MSI

MSI B450 GAMING PRO CARBON AC Bedienungsanleitung

MSI

MSI X299 GAMING PRO CARBON Bedienungsanleitung

MSI

MSI B550-A PRO Bedienungsanleitung

MSI

MSI P45 NEO3-FR - Motherboard - ATX Bedienungsanleitung

MSI

MSI H410M PRO-C Bedienungsanleitung

MSI

MSI P45-8D Series Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung